Carly Coding for BMW & Mini

With Carly, coding is easier than ever

Check out here what amazing customization options are waiting for your car!

1 series

E8x (2004 - 2013)F2x (2011 - 2019)F40 (2019 - now)
Alarm System
Panic alarm with remote
active
off
Press and hold the ‘unlock trunk’ button to trigger the alarm. To activate this function, also activate ‘Panic alarm’ in the DWA module. (codable in CAS)

Arm/Disarm Anti-Theft Alarm System
Only with remote
With locks and remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote. (codable in CAS)

Panic alarm
on
off
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on the remote. To activate this function also activate ‘Panic alarm with remote’ in the CAS module. (codable in DWA)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in DWA)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in DWA)

Alarm with dimmed headlights
on
off
Dimmed headlights blink when alarm is initiated. (codable in DWA)

Alarm with high beams
on
off
High beams blink when alarm is initiated. (codable in DWA)

Alarm with warning lights
on
off
Warning lights blink when alarm is initiated. (codable in DWA)

Alarm type
Europe
USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in DWAS)

Audible confirmation
on
off
Enable menus for audible confirmation for locking/unlocking the vehicle in the iDrive. The menu can be found in the same menu as the other locking confirmation settings in the iDrive. Only works if an ‘Anti Theft Alarm System’ is installed, because the sound is generated by the siren of the anti theft alarm system and not by the horn. If you are not sure, whether an ‘Anti Theft Alarm System’ or only the standard ‘Anti Theft Protection’ is installed, please perform a diagnostic session. You can then check if the module for the anti theft alarm system was found or not. (codable in CCC)

Audible confirmation – unlocking vehicle
on
off
Display option for audible confirmation for unlocking the vehicle in the iDrive. Please enable ‘Audible confirmation’ for this as well in this module and carefully read the description for it. (codable in CCC)

Audible confirmation – locking vehicle 1/2
on
off
Display option for audible confirmation for locking the vehicle in the iDrive. Please enable ‘Audible confirmation’ for this as well in this module and carefully read the description for it. (codable in CCC)

Audible confirmation – locking vehicle 2/2
on
off
Only change this function with ‘Audible confirmation – locking vehicle 1/2’. (codable in CCC)

Angel Eyes
Daytime running lights – angel eyes
on
off
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’ and ‘Daytime running lights – customization’ to ‘Only additional lights’. If you want to increase the brightness, please use ’Daytime running lights – angel eyes brightness’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Angel eyes brightness daytime running lights
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (codable in FRM)

Angel eyes brightness standing lights
off
very low
low
medium
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. (codable in FRM)

Angel eyes brightness parking lights
off
very low
low
medium
high
very high
Brightness of Angel Eyes (Corona rings) for parking lights. (codable in FRM)

Brightness of Angel Eyes 1 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (codable in FRM)

Brightness of Angel Eyes 2 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)

Brightness of Angel Eyes 3 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)

Brake lights
Brake force display
on
off
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. (codable in FRM)

Brake force display 1/2
on
on (alternative)
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. To activate this function, set ‘Brake force display 2/2’ to ‘active’. (codable in FRM)

Brake force display 2/2
on
on (alternative)
off
Only change this function with ‘Brake force display 1/2’. (codable in FRM)

Brake force display – minimum speed
20 kph / 12 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – blinking speed
slow
fast
Blinking speed for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – angel eyes
off
on
flashing
Customization for angel eyes for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – outer brake lights
off
on
flashing
Customization for outer brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – inner brake lights
on
flashing
Customization for inner brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – third brake light
off
on
flashing
Customization for third brake lights (rear window) for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – tail lights
off
on
flashing
Customization for tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – rear fog lights
off
on
flashing
Customization for rear fog lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Cleaning
Wiping interval standstill
3s
5s
Interval in seconds for windscreen wipers at standstill. (codable in JBBF)

Wiping interval rear window
off
2s
4s
6s
8s
12s
Interval in seconds for windscreen rear window wipers. (codable in JBBF)

Rear wiper in reverse gear
on
off
Rear wiper automatically turns on in reverse gear when front wipers are active. (codable in JBBF)

Windscreen wipers continue
on
off
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in JBBF)

Wipe delay after windowscreen cleaning
0.1s
0.3s
0.5s
0.7s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in JBBF)

Wipe delay after rear window cleaning
0.1s
0.3s
0.5s
0.7s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in JBBF)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in JBBF)

Number of wipes after rear window cleaning
1
2
3
4
Number of wipes after rear window is cleaned. (codable in JBBF)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in JBBF)

Number until headlight cleaning
3
5
7
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in JBBF)

Number of splashes for head lights
2
3
Number of splashes for cleaning the head lights. (codable in JBBF)

Length of splash for head lights
0.7s
1s
0.5s
Length of a single splash for head light cleaning. (codable in JBBF)

Delay between splashes for head lights
1.3s
1s
1.5s
Delay between splashes for head light cleaning. (codable in JBBF)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)
Comfort Functions
Comfort start
on
off
Ignition key just has to be tapped once to start the engine after ignition is turned on. (codable in CAS)

Comfort eject
on
off
Turn off the ignition with a long press on the start/stop button in order to eject the ignition key. (codable in CAS)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)

Comfort open using keylocks
on
off
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)

Comfort close using keylocks
on
off
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)

Comfort folding for sideview mirrors
on
off
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate ‘Comfort folding/unfolding for sideview mirrors’ in the ‘FRM’ module. Also activate ‘Comfort open using remote’ and ‘Comfort close using remote’ in this module. (codable in CAS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in CAS)

Deactivate comfort access
on
off
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)

Coming Home
Activate follow me home lights
on
off
Follow me home lights are active/not active. (codable in FRM)

Follow me home lights with remote
on
off
Quickly press the ‘Open trunk’ button twice to activate the follow me home lights. In some circumstances the function ‘Panic mode remote’ in the CAS has to be activated, too. (codable in FRM)

Cancel follow me home lights
on
off
Follow me home lights are cancelled, when activating the flash to pass again. (codable in FRM)

Extend follow me home lights
on
off
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in FRM)

Follow me home lights duration
off
40s
90s
150s
240s
Duration of follow me home lights in seconds. To activate follow me home lights, activate the flash to pass, while the enginge is off. (codable in FRM)

Follow me home lights duration Key 1
off
40s
90s
150s
240s
Separate setting for duration in seconds of follow me home lights for key 1. (codable in FRM)

Follow me home lights duration Key 2
off
40s
90s
150s
240s
Separate setting for duration in seconds of follow me home lights for key 2. (codable in FRM)

Follow me home lights duration Key 3
off
40s
90s
150s
240s
Separate setting for duration in seconds of follow me home lights for key 3. (codable in FRM)

Convertible
Speed limit roof open/close
6 kph / 4 mph
30 kph / 19 mph
50 kph / 31 mph
Speed limit for closing/opening the roof while driving. For pre-facelift models 30 kph is recommended, due to the less stable construction of the roof. (codable in CTM)
Corner LEDs
Corner LEDs
on
off
Corner LEDs are active/not active – also known as ‘Corner Delete Mod’. This function often only works on US models to deactivate the corner LEDs. (codable in FRM)

Corner LEDs brightness – low beams
off
low
medium
high
Brightness of corner LEDs when low beams are active. (codable in FRM)

Corner LEDs brightness – high beams
off
low
medium
high
Brightness of corner LEDs when high beams are active. (codable in FRM)

Cornering Light
Cornering lights 1/3
on
off
Use front fog lights/high beams as cornering lights. Also, this function often requires adaptive headlights to be installed. (codable in FRM)

Cornering lights 2/3
on
off
Only change this function with ‘Cornering lights 1/3’. Also, this function often requires adaptive headlights to be installed. (codable in FRM)

Cornering lights 3/3
on
off
Only change this function with ‘Cornering lights 1/3’. Also, this function often requires adaptive headlights to be installed. (codable in FRM)

Cornering lights – front fog lights
on
off
Front fog lights are used as cornering lights. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering lights – reverse gear
on
off
Use cornering lights also when reversing. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering lights – brightness
off
very low
low
medium
high
very high
Brightness of ‘Cornering lights’. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering lights – key 1
on
off
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 1. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering lights – key 2
on
off
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 2. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering lights – key 3
on
off
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 3. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering lights – key 4
on
off
Cornering lights are active/not active. Separate setting for ‘Cornering lights’ for key 4. Only works if ‘Cornering lights’ is also activated. (codable in FRM)

Cornering Light
on
off
Display menu for activating cornering light in the iDrive. The menu can be found in the same menu as the other light settings in the iDrive. Also, cornering light often requires adaptive headlights to be installed. (codable in CCC)

Daytime Running Lights
Daytime running lights in OBC
on
off
Turn daytime running lights on/off in on board computer. Might not work if an iDrive system is installed. (codable in KOMBI)

Daytime running lights 1/2
on
off
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 2/2’ as well. (codable in FRM)

Daytime running lights 2/2
on
off
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 1/2’ as well. (codable in FRM)

Daytime running lights – Key 1
on
off
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 1. (codable in FRM)

Daytime running lights – Key 2
on
off
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 2. (codable in FRM)

Daytime running lights – Key 3
on
off
Daytime running lights are active/not active. Separate setting for ‘Daytime running lights’ for key 3. (codable in FRM)

Daytime running lights customization
off
dimmed turn signals
dimmed high beams
Customization of the daytime running lights. Brightness can be set with ‘Daytime running lights brightness’. (codable in FRM)

Daytime running lights brightness
very low
low
medium
high
very high
Brightness for dimmed daytime running lights. To use this function, also activate ‘Daytime running lights customization’. (codable in FRM)

Daytime running lights – customization
Off
Low beams
High beams
Only additional lights (EU models)
Only additional lights (US models)
Customization of the daytime running lights (DRL). The DRL is activated when the light switch is set to position ‘0’ in the car. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – high beams brightness
off
very low
low
medium
high
very high
Brightness of high beams for daytime running lights. To activate the high beams for daytime running lights, set ‘Daytime running lights – customization’ to ‘High beams’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – front fog lights
on
off
Use front fog lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – front fog lights brightness
off
very low
low
rather low
medium
rather high
high
very high
Brightness for ‘Daytime running lights – front fog lights’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – front turn signals
on
off
Use front turn signals as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – angel eyes
on
off
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’ and ‘Daytime running lights – customization’ to ‘Only additional lights’. If you want to increase the brightness, please use ’Daytime running lights – angel eyes brightness’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Angel eyes brightness daytime running lights
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (codable in FRM)

Daytime running lights – sidemarker
on
off
Use sidemarkers as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – number plate lighting
on
off
Use number plate lighting as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – tail lights
on
off
Use tail lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – inner brake lights
on
off
Use inner brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Daytime running lights – 3rd brake lights
on
off
Use 3rd brake lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 1 series (E8x). (codable in FRM)

Brightness of Angel Eyes 1 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (codable in FRM)

Brightness of Angel Eyes 2 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)

Brightness of Angel Eyes 3 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)

Daytime running lights – tail lights brightness
off
very low
low
medium
high
very high
Brightness for ‘Daytime running lights – tail lights’. (codable in FRM)

Daytime running lights
standard
permanently on
permanently off
Set mode of daytime running lights. Set to ‘standard’ or ‘display menu’ to display a menu in the iDrive settings for changing the mode of daytime running lights. (codable in CIC)

Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in CAS)

Easy entry Key 1
on
off
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 2
on
off
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 3
on
off
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 4
on
off
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Engine Start Stop
Start/Stop-Automatic memory
on
off
Setting for Start/Stop-Automatic is saved. This way the manual setting of the Start/Stop-Automatic button, i.e. whether the button is turned on or off, is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in IHKA)
Flash to Pass
Flash to pass with bi-xenon
on
off
Bi-xenon lamps are used for flash to pass. (codable in FRM)

Front fog lights with flash to pass
on
off
Front fog lights are automatically turned off when activating flash to pass. (codable in FRM)

Gear Shift Indicator
Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator key 1
on
off
Gear shift indicator for key 1. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator key 2
on
off
Gear shift indicator for key 2. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator key 3
on
off
Gear shift indicator for key 3. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator key 4
on
off
Gear shift indicator for key 4. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Headlight Cleaning
Head light cleaning
on
off
Turn head light cleaning on/off. (codable in JBBF)

Number until headlight cleaning
3
5
7
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in JBBF)

Number of splashes for head lights
2
3
Number of splashes for cleaning the head lights. (codable in JBBF)

Length of splash for head lights
0.7s
1s
0.5s
Length of a single splash for head light cleaning. (codable in JBBF)

Delay between splashes for head lights
1.3s
1s
1.5s
Delay between splashes for head light cleaning. (codable in JBBF)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in FRM)
iDrive Menus
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the DWA module is installed. (codable in CIC)

Address book menu
on
off
Show menu for address book in iDrive. (codable in CIC)

Notepad menu
on
off
Show menu for notepad in iDrive. (codable in CIC)

Audible confirmation
on
off
Enable menus for audible confirmation for locking/unlocking the vehicle in the iDrive. The menu can be found in the same menu as the other locking confirmation settings in the iDrive. Only works if an ‘Anti Theft Alarm System’ is installed, because the sound is generated by the siren of the anti theft alarm system and not by the horn. If you are not sure, whether an ‘Anti Theft Alarm System’ or only the standard ‘Anti Theft Protection’ is installed, please perform a diagnostic session. You can then check if the module for the anti theft alarm system was found or not. (codable in CCC)

Audible confirmation – unlocking vehicle
on
off
Display option for audible confirmation for unlocking the vehicle in the iDrive. Please enable ‘Audible confirmation’ for this as well in this module and carefully read the description for it. (codable in CCC)

Audible confirmation – locking vehicle 1/2
on
off
Display option for audible confirmation for locking the vehicle in the iDrive. Please enable ‘Audible confirmation’ for this as well in this module and carefully read the description for it. (codable in CCC)

Audible confirmation – locking vehicle 2/2
on
off
Only change this function with ‘Audible confirmation – locking vehicle 1/2’. (codable in CCC)

Rain light sensor sensitivity 1/2
on
off
Display menu for changing the sensitivity of the rain light sensor in the iDrive. The menu can be found in the same menu as the other light settings in the iDrive. (codable in CCC)

Rain light sensor sensitivity 2/2
on
off
Only change this function with ‘Rain light sensor sensitivity 1/2’. (codable in CCC)

Seat heater
on
off
Display menu for changing the heat distribution of the seat heater. The menu can be found in the same menu as the other heater settings in the iDrive. Also, changing the heating distribution often only works on 5 series with sport seats. (codable in CCC)

Cornering Light
on
off
Display menu for activating cornering light in the iDrive. The menu can be found in the same menu as the other light settings in the iDrive. Also, cornering light often requires adaptive headlights to be installed. (codable in CCC)

Instrument Cluster
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

Digital speedometer correction
true speed
‘corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

‘Correction’ analog speedometer
true speed
‘corrected’ speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Blank information display in dashboard
on
off
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)

GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Permanent speedometer lighting
on
off
Speedometer is always lit, even in the daytime. (codable in KOMBI)

Momentary fuel consumption
on
off
Show momentary fuel consumption in the on board computer. (codable in KOMBI)

Cruise Control speed display
0s
3s
6s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)

Daytime running lights in OBC
on
off
Turn daytime running lights on/off in on board computer. Might not work if an iDrive system is installed. (codable in KOMBI)

Light sensitivity in OBC 1/2
on
off
Change light sensitivity in on board computer. Might not work if an iDrive system is installed. (codable in KOMBI)

Light sensitivity in OBC 2/2
on
off
Only change with ‘Light sensitivity in OBC 1/2’. (codable in KOMBI)

Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator key 1
on
off
Gear shift indicator for key 1. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator key 2
on
off
Gear shift indicator for key 2. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator key 3
on
off
Gear shift indicator for key 3. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator key 4
on
off
Gear shift indicator for key 4. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Interior Lights
Interior lights with remote
active
off
Pressing the lock button on the remote, when the car is already locked, turns on the interior lights. (codable in CAS)

Interior lighting off after 2 minutes
on
off
Interior lighting is automatically turned off after two minutes. (codable in FRM)

Soft turn on/off for interior lighting
on
off
Interior lighting is softly turned on and off. (codable in FRM)

Klimatization
Save circulation settings
on
off
Circulation settings are saved for next start of the vehicle. (codable in IHKA)

Show ‘Auto’ in automatic mode
on
off
Auto’ is displayed in automatic mode for air conditioning. (codable in IHKA)

Blower level during automatic A/C
on
off
The current blower level is displayed even during automatic mode of the air conditioning. (codable in IHKA)

Blower symbol
on
off
Show blower symbol. (codable in IHKA)

Off-Mode Memory
on
off
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)

Compressor with A/C in ‘Auto’-mode 1/4
on
off
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this function, deactivate all functions for ‘Automatic compressor with A/C’. (codable in IHKA)

Compressor with A/C in ‘Auto’-mode 2/4
on
off
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this function, deactivate all functions for ‘Automatic compressor with A/C’. (codable in IHKA)

Compressor with A/C in ‘Auto’-mode 3/4
on
off
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this function, deactivate all functions for ‘Automatic compressor with A/C’. (codable in IHKA)

Compressor with A/C in ‘Auto’-mode 4/4
on
off
When pressing the ‘Automatic’ button for air conditioning, the air conditioning starts by itself. To deactivate this function, deactivate all functions for ‘Automatic compressor with A/C’. (codable in IHKA)

Residual heat with ‘ALL’-button
on
off
ALL’-button triggers residual heat function of the AC. (codable in IHKA)

Legal Disclaimer
Legal disclaimer (US)
on
off
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CIC)

Camera disclaimer
on
active (6 seconds)
not active
Show legal disclaimer for rear view camera. (codable in CIC)

Night Vision disclaimer
on
active (6 seconds)
not active
Show legal disclaimer for night vision view camera. (codable in CIC)

Legal disclaimer (US)
on
off
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CCC)

Legal disclaimer (US) – display time
0s
10s
Display time for the legal disclaimer in the iDrive. Setting this function to ‘0s’ deactivates the legal disclaimer and sometimes even speeds up the starting time of the iDrive. This warning is usually only shown in US-models. (codable in CCC)

Locking
Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)

Comfort close using keylocks
on
off
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in CAS)

Deactivate comfort access
on
off
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)

Lock tailgate when car locked
on
off
Tailgate cannot be unlocked, when car is locked. (codable in CAS)

Automatically lock vehicle duration
1 min
2 min
5 min
10 min
15 min
If no door or window has been opened after the car has been unlocked, the doors automatically lock. Use this function to set the duration after which the car is automatically locked. (codable in CAS)

Automatically lock vehicle Key 1
on
off
Separate setting for ‘Automatically lock vehicle’ for key 1nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)

Automatically lock vehicle Key 2
on
off
Separate setting for ‘Automatically lock vehicle’ for key 2nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)

Automatically lock vehicle Key 3
on
off
Separate setting for ‘Automatically lock vehicle’ for key 3nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)

Automatically lock vehicle Key 4
on
off
Separate setting for ‘Automatically lock vehicle’ for key 4nIf no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in CAS)

Lock vehicle upon ignition
on
off
Vehicle is locked, when ignition is turned on. (codable in CAS)

Threshold speed for vehicle locking
2 kph / 1 mph
6 kph / 4 mph
12 kph / 8 mph
18 kph / 11 mph
24 kph / 15 mph
30 kph / 19 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in CAS)

Lock vehicle at x kph Key 1
on
off
Automatically lock the vehicle at the set threshold speed when key 1 is used. (codable in CAS)

Lock vehicle at x kph Key 2
on
off
Automatically lock the vehicle at the set threshold speed when key 2 is used. (codable in CAS)

Lock vehicle at x kph Key 3
on
off
Automatically lock the vehicle at the set threshold speed when key 3 is used. (codable in CAS)

Lock vehicle at x kph Key 4
on
off
Automatically lock the vehicle at the set threshold speed when key 4 is used. (codable in CAS)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FRM)

Optical confirmation lock vehicle Key 1
on
off
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in FRM)

Optical confirmation lock vehicle Key 2
on
off
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in FRM)

Optical confirmation lock vehicle Key 3
on
off
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in FRM)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in DWA)

Mirrors
Mirror tilt 1/2
on
off
Requirement for mirror tilt functions. (codable in FRM)

Mirror tilt 2/2
on
off
Requirement for mirror tilt functions. (codable in FRM)

Tilt mirror in reverse
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in FRM)

Comfort folding for sideview mirrors
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in FRM)

Electrochromatic mirror dimming
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating). Side mirrors automatically dim electrochromatic. (codable in FRM)

Opening
Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)

Comfort open using keylocks
on
off
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)

Deactivate comfort access
on
off
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen anymore by tricking the comfort access. In order to activate comfort access again, please set this coding to ‘active’. (codable in CAS)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in CAS)

Easy entry Key 1
on
off
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 2
on
off
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 3
on
off
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 4
on
off
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Selective central locking
on
off
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)

Selective central locking Key 1
on
off
Separate setting for ‘Selective central locking’ for key 1nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)

Selective central locking Key 2
on
off
Separate setting for ‘Selective central locking’ for key 2nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)

Selective central locking Key 3
on
off
Separate setting for ‘Selective central locking’ for key 3nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)

Selective central locking Key 4
on
off
Separate setting for ‘Selective central locking’ for key 4nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in CAS)

Selective central locking – unlock fuel lid
on
off
The fuel lid is also unlocked upon the first unlock, when ‘Selective central locking’ is active. (codable in CAS)

Unlock car when turned off
on
off
Doors are automatically unlocked, when ignition key is ejected. Only works if ‘Lock vehicle at x kph Key 1-4’ is activated. (codable in CAS)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FRM)

Optical confirmation unlock vehicle Key 1
on
off
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in FRM)

Optical confirmation unlock vehicle Key 2
on
off
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in FRM)

Optical confirmation unlock vehicle Key 3
on
off
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in FRM)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in DWA)

Park Distance Control (PDC)
PDC view
vertical (F-Models)
horizontal (E-Models)
Direction of park distance control view. (codable in CIC)
Parking Light
Comfort standing light
on
off
If the light switch is set at automatic or on, the parking lights remain on, until the vehicle is locked with the remote. (codable in FRM)
Power Windows
Power windows after ignition off
on
off
Power windows are active for another minute after ignition is turned off. (codable in CAS)

Power windows after ignition off
1 min
2 min
5 min
10 min
15 min
Duration in minutes, for which power windows are active after turning off the ignition. (codable in CAS)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in CAS)

Easy entry Key 1
on
off
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 2
on
off
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 3
on
off
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Easy entry Key 4
on
off
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in CAS)

Continue window action when door is opened
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in FRM)

Continue window action when engine started
on
off
When the engine is started while a window is opening/closing, the window will continue opening/closing the window. (codable in FRM)

Rain Light Sensor
Rain light sensor sensitivity 1/2
on
off
Display menu for changing the sensitivity of the rain light sensor in the iDrive. The menu can be found in the same menu as the other light settings in the iDrive. (codable in CCC)

Rain light sensor sensitivity 2/2
on
off
Only change this function with ‘Rain light sensor sensitivity 1/2’. (codable in CCC)

Seatbelt Hand-over
Seatbelt Hand-Over
on
off
Automatic seatbelt hand-over is active/inactive. (codable in FRM)

Seatbelt Hand-Over driver
on
off
Automatic seatbelt hand-over for driver is active/inactive. (codable in FRM)

Seatbelt Hand-Over passenger
on
off
Automatic seatbelt hand-over for passenger is active/inactive. (codable in FRM)

Seating Heater
Seat heater
on
off
Display menu for changing the heat distribution of the seat heater. The menu can be found in the same menu as the other heater settings in the iDrive. Also, changing the heating distribution often only works on 5 series with sport seats. (codable in CCC)

Seat heater level in menu
on
off
Show the current seat heater level for the front seats in the seat heater menu. (codable in CCC)

Show seat heater menu automatically
on
off
Show seat heater menu for a few seconds when activating the seat heater. This function often only works in 5 series models. (codable in CCC)

Sidemarker
Sidemarker (US)
on
off
Sidemarkers are permanently active. May need additional ‘Sidemarker (US)’ functions set to ‘active’ if available. If warnings for the turn signals are shown after successfully coding this, please disable the voltage monitoring for the turn signals. This warning is most likely due to the fact that your car is not a US model. (codable in FRM)

Sidemarker (US) brightness
off
very low
low
rather low
medium
rather high
high
very high
Brightness for ‘Sidemarker (US)’. (codable in FRM)

Speedometer
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

Digital speedometer correction
true speed
‘corrected’ speed
Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

‘Correction’ analog speedometer
true speed
‘corrected’ speed
This coding does not work on US models. Per default the speed shown in the digital speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Tail gate/Rear lid
Unlock rear window
on
off
Key unlocks rear window instead of trunk lid in touring models. (codable in CAS)

Unlock rear window key 1
on
off
Key 1 unlocks rear window instead of trunk lid in touring models. (codable in CAS)

Unlock rear window key 2
on
off
Key 2 unlocks rear window instead of trunk lid in touring models. (codable in CAS)

Unlock rear window key 3
on
off
Key 3 unlocks rear window instead of trunk lid in touring models. (codable in CAS)

Unlock rear window key 4
on
off
Key 4 unlocks rear window instead of trunk lid in touring models. (codable in CAS)

Unlock rear window via outside button
on
off
Outside trunk lid button opens rear window instead of trunk lid in touring models. (codable in CAS)

Unlock rear window via outside button Key 1
on
off
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 1. (codable in CAS)

Unlock rear window via outside button Key 2
on
off
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 2. (codable in CAS)

Unlock rear window via outside button Key 3
on
off
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 3. (codable in CAS)

Unlock rear window via outside button Key 4
on
off
Outside trunk lid button opens rear window instead of trunk lid in touring models. Separate setting for key 4. (codable in CAS)

Unlock rear window with footwell switch
on
off
Footwell switch opens rear window instead of trunk lid in touring models. (codable in CAS)

Open rear window via footwell switch Key 1
on
off
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 1. (codable in CAS)

Open rear window via footwell switch Key 2
on
off
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 2. (codable in CAS)

Open rear window via footwell switch Key 3
on
off
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 3. (codable in CAS)

Open rear window via footwell switch Key 4
on
off
Footwell switch opens rear window instead of trunk lid in touring models. Separate setting for key 4. (codable in CAS)

Tank
Threshold for low range warning
off
20 km / 12 mi
50 km / 31 mi
Threshold for acoustic low range warning due to low fuel level. (codable in KOMBI)

Threshold for tank reserve warning
6.5 litres
8.0 litres
10.0 litres
12.5 litres
20.0 litres
Threshold for tank reserve warning due to low fuel level. (codable in KOMBI)

Telephone
Telephone ringtone
BMW
Mini
Customize telephone ringtone. (codable in CIC)
Turn signals
Hazard lights
standard
double
Hazard lights blink once or twice. (codable in FRM)

Crash lights
standard
double
Hazard lights blink once or twice upon an accident. (codable in FRM)

One-touch turn signal function
1
3
5
Number of turn signals when tapping the turn signal. If available, please activate this option for the different keys as well. In some cases, this option also needs to be enabled in the iDrive. (codable in FRM)

One-touch turn signal function Key 1
1
3
5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 1. (codable in FRM)

One-touch turn signal function Key 2
1
3
5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 2. (codable in FRM)

One-touch turn signal function Key 3
1
3
5
Number of turn signals when tapping the turn signal. Separate setting for ‘One-touch turn signal function’ for key 3. (codable in FRM)

Turn signals front as LED
on
off
Activate this option if you have replaced the turn signals front with LED bulbs. (codable in FRM)

Turn signals rear as LED
on
off
Activate this option if you have replaced the turn signals rear with LED bulbs. (codable in FRM)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FRM)

Optical confirmation unlock vehicle Key 1
on
off
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 1. (codable in FRM)

Optical confirmation unlock vehicle Key 2
on
off
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 2. (codable in FRM)

Optical confirmation unlock vehicle Key 3
on
off
Optical confirmation for unlocking vehicle is active/not active. Separate setting for ‘Optical confirmation for unlocking’ for key 3. (codable in FRM)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FRM)

Optical confirmation lock vehicle Key 1
on
off
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 1. (codable in FRM)

Optical confirmation lock vehicle Key 2
on
off
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 2. (codable in FRM)

Optical confirmation lock vehicle Key 3
on
off
Optical confirmation for locking vehicle is active/not active. Separate setting for ‘Optical confirmation for locking’ for key 3. (codable in FRM)

Video in Motion
Video in motion 1/2
on
off
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/2’ as well. (codable in CIC)

Video in motion 2/2
on
off
Only change this function with ‘Video in motion 1/2’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion
during driving
only walking pace
only when handbrake pulled
not active
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CCC)

Voltage Monitoring
Angel Eyes voltage monit. 1/2
on
off
Voltage monitoring for angel eyes. Might cause flickering of LED lights. (codable in FRM)

Angel Eyes voltage monit. 2/2
on
off
Deactivate with ‘Angel Eyes voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Sidemarker voltage monit. 1/2
on
off
Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (codable in FRM)

Sidemarker voltage monit. 2/2
on
off
Deactivate with ‘Sidemarker voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Turn signals front voltage monit. 1/2
on
off
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in FRM)

Turn signals front voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Fog lights voltage monit. 1/2
on
off
Voltage monitoring for fog lights. Might cause flickering of LED lights. (codable in FRM)

Fog lights voltage monit. 2/2
on
off
Deactivate with ‘Fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

High beams voltage monit. 1/2
on
off
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in FRM)

High beams voltage monit. 2/2
on
off
Deactivate with ‘High beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Low beams voltage monit. 1/2
on
off
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in FRM)

Low beams voltage monit. 2/2
on
off
Deactivate with ‘Low beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Turn signals rear voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (codable in FRM)

Turn signals rear voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Braking lights voltage monit. 1/2
on
off
Voltage monitoring for braking lights. Might cause flickering of LED lights. (codable in FRM)

Braking lights voltage monit. 2/2
on
off
Deactivate with ‘Braking lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Inner brake light voltage monit. 1/2
on
off
Voltage monitoring for inner brake light. Might cause flickering of LED lights. (codable in FRM)

Inner brake light voltage monit. 2/2
on
off
Deactivate with ‘Inner brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Third brake light voltage monit. 1/2
on
off
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in FRM)

Third brake light voltage monit. 2/2
on
off
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Tail lights voltage monit. 1/2
on
off
Voltage monitoring for tail lights. Might cause flickering of LED lights. (codable in FRM)

Tail lights voltage monit. 2/2
on
off
Deactivate with ‘Tail lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Reversing lights voltage monit. 1/2
on
off
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (codable in FRM)

Reversing lights voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in FRM)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Rear fog lights voltage monit. 1/2
on
off
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in FRM)

Rear fog lights voltage monit. 2/2
on
off
Deactivate with ‘Rear fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Rear fog light left voltage monit. 1/2
on
off
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in FRM)

Rear fog light left voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Rear fog light right voltage monit. 1/2
on
off
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in FRM)

Rear fog light right voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FRM)

Warnings
Speed limit warning
off
120 kph / 75 mph
190 kph / 120 mph
210 kph / 130 mph
240 kph / 150 mph
Speed limit warning at 120 kph is active/not active. (codable in KOMBI)

Temperature warning
on
off
Warning for outside temperature below 4° C / 39° F is active/not active. (codable in KOMBI)

Ignition key warning
on
off
Ignition key warning active/not active. (codable in KOMBI)

Threshold for low range warning
off
20 km / 12 mi
50 km / 31 mi
Threshold for acoustic low range warning due to low fuel level. (codable in KOMBI)

Threshold for tank reserve warning
6.5 litres
8.0 litres
10.0 litres
12.5 litres
20.0 litres
Threshold for tank reserve warning due to low fuel level. (codable in KOMBI)

Lights-on warning
on
off
A warning is shown, when the driver’s door is opened while the lights are still on. (codable in FRM)

Angel Eyes/standing lights warning
on
off
Warning for malfunction of angel eyes and the front standing lights in the on board computer. (codable in FRM)

Turn signals front warning
on
off
Warning for malfunction of front turn signals in the on board computer. (codable in FRM)

Fog lights front warning
on
off
Warning for malfunction of front fog lights in the on board computer. (codable in FRM)

High beams warning
on
off
Warning for malfunction of high beams in the on board computer. (codable in FRM)

Low beams warning
on
off
Warning for malfunction of low beams in the on board computer. (codable in FRM)

Turn signals rear warning
on
off
Warning for malfunction of rear turn signals in the on board computer. (codable in FRM)

Outer brake lights warning
on
off
Warning for malfunction of outer braking lights in the on board computer. (codable in FRM)

Inner brake lights warning
on
off
Warning for malfunction of inner braking lights in the on board computer. (codable in FRM)

Third brake light warning
on
off
Warning for malfunction of third brake light in the on board computer. (codable in FRM)

Tail lights warning
on
off
Warning for malfunction of tail lights in the on board computer. (codable in FRM)

Reversing lights warning
on
off
Warning for malfunction of reversing lights in the on board computer. (codable in FRM)

License plate light warning
on
off
Warning for malfunction of license plate lights in the on board computer. (codable in FRM)

Rear fog light left warning
on
off
Warning for malfunction of rear left fog light in the on board computer. (codable in FRM)

Rear fog light right warning
on
off
Warning for malfunction of rear right fog light in the on board computer. (codable in FRM)

Seat belt warning
off
on
Various settings for the seat belt warning. (codable in CSM)

Seat belt reminder driver
off
on
Seat belt reminder for driver is active/ inactive. (codable in CSM)

Seat belt reminder passenger
off
on
Seat belt reminder for passenger is active/ inactive. (codable in CSM)

Welcome Light
Welcome lights
on
off
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in FRM)

Welcome lights Key 1
on
off
Separate setting for ‘Welcome lights’ for key 1. (codable in FRM)

Welcome lights Key 2
on
off
Separate setting for ‘Welcome lights’ for key 2. (codable in FRM)

Welcome lights Key 3
on
off
Separate setting for ‘Welcome lights’ for key 3. (codable in FRM)

Welcome lights Key 4
on
off
Separate setting for ‘Welcome lights’ for key 4. (codable in FRM)

Welcome lights duration
off
5s
10s
20s
40s
90s
150s
240s
Duration of the welcome lights in seconds. (codable in FRM)

Welcome lights – low beams
off
turn on softly
turn on hard
Low beams are turned on with welcome lights. (codable in FRM)

Welcome lights – brake force display
off
turn on softly
turn on hard
Brake force display is turned on with welcome lights. (codable in FRM)

Welcome lights – braking lights
off
turn on softly
turn on hard
Braking lights are turned on with welcome lights. (codable in FRM)

Welcome lights – turn signals front
off
turn on softly
turn on hard
Turn signals front are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in FRM)

Welcome lights – turn signals rear
off
turn on softly
turn on hard
Turn signals rear are turned on with welcome lights. To activate this function you may need to additionally code ‘Sidemarker (US) brightness’ to ‘very low’ or higher. (codable in FRM)

Welcome lights – high beams
off
turn on softly
turn on hard
High beams are turned on with welcome lights. (codable in FRM)

Welcome lights – number plate lighting
off
turn on softly
turn on hard
Number plate lights are turned on with welcome lights. (codable in FRM)

Welcome lights – front fog lights
off
turn on softly
turn on hard
Front fog lights are turned on with welcome lights. (codable in FRM)

Welcome lights – rear fog lights
off
turn on softly
turn on hard
Rear fog lights are turned on with welcome lights. (codable in FRM)

Welcome lights – corner LEDs
off
turn on softly
turn on hard
Corner LEDs are turned on with welcome lights. Due to the way LEDs work, it is not possible to softly turn them on. (codable in FRM)

Welcome lights – standing lights front
off
turn on softly
turn on hard
Standing lights front are turned on with welcome lights. (codable in FRM)

Welcome lights – standing lights rear
off
turn on softly
turn on hard
Standing lights rear are turned on with welcome lights. (codable in FRM)

Active Sound Design
Active Sound Design Mode
off
M5/M6
Mode for Active Sound Design. The Active Sound Design module produces an amplified exhaust sound in the interior through the speakers. If you disable this function a fault code in the ASD might appear. To remove this fault code restore the ASD from ist original backup, since the fault code appeared because the ASD has been disabled. (codable in ASD)

Active Sound Design Volume
very quiet
quiet
medium
loud
very loud
Volume for active sound design. (codable in ASD)

Alarm System
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in CIC)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Audible confirmation at night
on
off
Between 8:00 PM and 8:00 AM the volume of the sound for the audible confirmation for locking/unlocking the vehicle is automatically turned lower. (codable in FZD)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Alarm type
Europe
USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in FZD)

Audible confirmation – length
very short
short
medium
long
very long
Length of audible confirmation chirp. (codable in FZD)

Audible confirmation – pitch
very low
low
medium
high
very high
Pitch for audible confirmation. (codable in FZD)

Audible confirmation – min. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Minimum volume for the audible confirmation chirp. (codable in FZD)

Audible confirmation – max. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Maximum volume for the audible confirmation chirp. (codable in FZD)

Alarm with sound
on
off
Use this function to turn the alarm sound completely off. When an alarm is triggered only the lights will flash. This also disables the audible confirmation when locking the vehicle. (codable in FZD)

Alarm at night
on
off
Between 8:00 PM and 8:00 AM the alarm is automatically turned off. In this time the audible confirmation for locking/unlocking the vehicle is also turned off. (codable in FZD)

Alarm with turn signals
on
off
Turn signals blink when alarm is initiated. (codable in FZD)

Alarm with dimmed headlights
on
off
Dimmed headlights blink when alarm is initiated. (codable in FZD)

Alarm with high beams
on
off
High beams blink when alarm is initiated. (codable in FZD)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in FZD)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in FZD)

Ambient lighting
Ambient lighting brightness 1/2
same brightness as speedometer
own brightness
Usually the brightness of the ambient lighting is automatically adjusted to the brightness of the speedometer illumination. To set the brightness indepently from the speedometer illumination, set this function to ‘own brightness’. The brightness of the ambient lighting can then be changed with ‘Ambient lighting brightness 2/2’. (codable in FEM)

Ambient lighting brightness 2/2
very low
low
rather low
medium
rather high
high
very high
Own brightness for ambient lighting. In order to activate this function, set ‘Ambient lighting brightness’ to ‘own brightness’. (codable in FEM)

Individual ambient light
on
off
Show menu in iDrive to individualize ambient light. Functions depend on the installed lights. (codable in NBT)

Angel Eyes
Angel eyes brightn. left daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightn. right daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the right side. (codable in FEM)

Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the right side. (codable in FEM)

Angel eyes brightness parking lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for parking lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightness parking lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for parking lights. This function controls the brightness of the right side. (codable in FEM)

Audio
iDrive off when open door
on
off
Radio and Navigation turn off when the driver door is opened. This function doesn’t have an effect while engine is running. (codable in FEM)

Maximum volume when ignition on
quiet
medium
loud
Maximum volume for radio/music when the vehicle is turned on. The volume of the last drive is used. (codable in CIC)

Warning and menu sounds
BMW
Mini
BMW i
Rolls Royce
Depending on the manufacturer of the vehicle (BMW, Mini, BMW i or Rolls Royce) different sounds are used for warnings and menus. Use this feature to change the sounds to a different brand, for example from ‘BMW’ to ‘Rolly Royce’. (codable in NBT)

Audio source iPhone 1/2
on
on (alternative)
off
If an iPhone is connected via USB (either in the glove box or in the center console) it can be used as an audio source. (codable in NBT)

Audio source iPhone 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Brake lights
Brake force display
off
more lights
flashing brake signals
When braking hard (ABS needs to be triggered) the brake lights either flash or additional lights are turned on to signal the car behind that an emergency brake has been carried out. (codable in FEM)

Brake force display – minimum speed
5 kph / 3 mph
10 kph / 6 mph
30 kph / 19 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FEM)

Brake force display – lights
third brake light
turn signal lights
rear lights
Lights to be used for brake force display. (codable in FEM)

Brakes
Start engine without brake 1/2
on
off
To start engine without brake turn on ignition first and press ‘Start Stop’ long. Only change with ‘Start engine without brake 2/2’. (codable in FEM)

Start engine without brake 2/2
on
off
Only change with ‘Start engine without brake 1/2’. (codable in FEM)

Cleaning
Threshold washer fluid warning
low
medium
high
Threshold at which the washer fluid warning is turned on. The higher the threshold to activate this warning, the sooner this warning will be shown. (codable in FEM)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in FEM)

Number of wipes after rear window cleaning
off
1
2
3
4
Number of wipes after rear window is cleaned. (codable in FEM)

Wiping interval rear window
off
2s
4s
6s
8s
10s
12s
15s
Interval in seconds for windscreen rear window wipers. (codable in FEM)

Reduce wiper speed
off
130 kph / 80 mph
170 kph / 105 mph
210 kph / 130 mph
Threshold at which the wiper speed is reduced. (codable in FEM)

Rear window cleaning with low washer liquid
on
off
Rear windows are also cleaned even though the washer fluid level is low. (codable in FEM)

Wipe delay after windowscreen cleaning
0.1 s
0.3 s
0.5 s
0.7 s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in FEM)

Wipe delay after rear window cleaning
0.1 s
0.3 s
0.5 s
0.7 s
0.9 s
1.1 s
1.3 s
1.5 s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in FEM)

Wiping interval standstill
3s
5s
Interval in seconds for windscreen wipers at standstill. (codable in FEM)

Windscreen wipers continue
on
off
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in FEM)

Number until headlight cleaning
1
5
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in FEM)

Continue rear wiper when igntion turned on
on
off
Rear wiper continue wiping and don’t interrupt, when the ignition is turned on. (codable in FEM)

Rear wiper permanent when reversing
on
off
When rear wipers are active while reversing, they are automatically set to permament wiping. (codable in FEM)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in FEM)

Maximum speed headlight cleaning
6 kph / 4 mph
12 kph / 8 mph
30 kph / 19 mph
50 kph / 31 mph
80 kph / 50 mph
130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in FEM)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in FEM)

Length of splash for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in FEM)

Delay between splashes for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in FEM)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in FEM)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Comfort Functions
Start engine without brake 1/2
on
off
To start engine without brake turn on ignition first and press ‘Start Stop’ long. Only change with ‘Start engine without brake 2/2’. (codable in FEM)

Start engine without brake 2/2
on
off
Only change with ‘Start engine without brake 1/2’. (codable in FEM)

Start engine without clutch
on
off
To start engine without clutch turn on ignition first and press ‘Start Stop’ long. Please mind the selected gear at start. Only for manual transmission. (codable in FEM)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in FEM)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in FEM)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in FEM)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in FEM)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in FEM)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in FEM)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in FEM)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in FEM)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in FEM)

Door lock after driving away
on
off
Show menu in iDrive to activate door lock after driving away in vehicle settings ‘Doors/Key’. (codable in NBT)

Coming Home
Extend follow me home lights
on
off
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in FEM)
Daytime Running Lights
Daytime running lights – light switch
off
A or 0
A, 0 or 1
Low beams
High beams
Positions for the light switch where the daytime running lights function is activated. (codable in FEM)

Angel eyes brightn. left daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightn. right daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the right side. (codable in FEM)

Daytime running lights – outer tail l. left
on
off
Use left outer tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. outer tail l. left
very low
low
medium
high
very high
Brightness of outer left tail lights for daytime running lights. (codable in REM)

Daytime running lights – outer tail l. right
on
off
Use right outer tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. outer tail l. right
very low
low
medium
high
very high
Brightness of outer right tail lights for daytime running lights. (codable in REM)

Daytime running lights – inner tail l. left
on
off
Use left inner tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. inner tail l. left
very low
low
medium
high
very high
Brightness of inner left tail lights for daytime running lights. (codable in REM)

Daytime running lights – inner tail l. right
on
off
Use right inner tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. inner tail l. right
very low
low
medium
high
very high
Brightness of inner right tail lights for daytime running lights. (codable in REM)

Daytime running lights
display menu
permanently on
permanently off
Set mode of daytime running lights. Set to ‘display menu’ to display a menu in the iDrive settings for changing the mode of daytime running lights. (codable in CIC)

Display
Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Display ‘Diesel’ next to fuel level
on
off
Use this function to show the diesel sign next to fuel level indicator in the Kombi display. Not available in sports mode. (codable in KOMBI)

Display engine power
on
off
Use this function to show horsepowers in the instrument cluster below the rev counter. This display is only active in sports mode. (codable in KOMBI)

Display Layout Kombi
BMW AG
M GmbH
Alpina Tuning
Use this function to change the layout of your Kombi display. When select ‘Alpina’ please also enable ‘Display Layout Kombi – Alpina’ aktiviert werden. (codable in KOMBI)

Display Layout Kombi – Alpina
on
off
Only change this coding in combination with ‘Display Layout Kombi’ when ‘Alpina’ is selected. When coding is active for some models the fuel level may not be calculated correctly. This is because Alpina models normally have larger fuel tanks than 60 liters. Therefore, please check the fuel indicator after coding this function. (codable in KOMBI)

Logo KOMBI
no logo
edrive
M-Sport
m550i
m550d
m40d
m760i
m760il
B7 Biturbo
B7
B6 Biturbo
B6
B5 Biturbo
D5 Biturbo
XD3 Biturbo
m750ld
m750d
V12
Use this function so change the logo inside KOMBI display. Not available in M view. (codable in KOMBI)

ECO PRO layout change
on
off
Show menu in iDrive to activate/deactivate the layout change of the instrument cluster when changing to ECO Pro mode. (codable in NBT)

Instant fuel consumption
on
off
Activate an iDrive menu to show the instant fuel consumption display in the instrument cluster. (codable in NBT)

Drive mode warning
on
off
Show menu in iDrive to activate/deactivate the warning message after chaging the drive mode. (codable in NBT)

Speedometer Zoom
on
off
Show menu in iDrive to activate highlighting the current speed in the speedometer. (codable in NBT)

X View menu
on
off
Show ‘X View’ menu in the iDrive. In this menu you can check the current pitch and roll of your vehicle. This option is only available for vehicles with all-wheel-drive. (codable in NBT)

Automatic clock change 1/2
on
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 2/2’. (codable in NBT)

Bang Olufsen sound menu
on
on (alternative)
off
Show Bang and Olufsen menu in iDrive. Use this menu to access special Bang and Olufsen equalizer settings. Some functions depend on the installed speakers. (codable in NBT)

M-driving dynamics
on
off
Show menu in iDrive inside instrument cluster settings to activate M-driving dynamics. These menu options can only be used in M model cars. (codable in NBT)

Show KW/MW radio band
on
show MW menu
show KW menu
off
Use this function to enable or hide the MW and KW menus in the radio menu. (codable in NBT)

Automatic time setting 2/2
on
on (alternative)
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 1/2’. (codable in NBT)

Door lights
Turn on door lights in reverse gear
on
off
Turn on door lights while car is in reverse. This function can be used to illuminate the area while reversing in order to get a better view of the sides of the car. (codable in FEM)
Drive assistant
Blind spot detection – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Speed at which the blind spot detection is turned on. This function has only an effect if the car is equipped with a blind spot detection. (codable in ICM)
Drive dynamic
Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in CIC)
Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in FEM)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in FEM)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in FEM)

Easy entry – steering wheel 1/2
on
off
Also adjust the steering wheel position when easy entry is activated. (codable in FEM)

Easy entry – steering wheel 2/2
on
off
Only change this function with ‘Easy entry – steering wheel 1/2’. (codable in FEM)

Engine Start Stop
Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Start/Stop-Automatic memory
on
off
Setting for Start/Stop-Automatic is saved. This way the manual setting of the Start/Stop-Automatic button, i.e. whether the button is turned on or off, is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in FEM)

Start/Stop-Automatic default off
on
off
Engine start/stop automatic is turned off by default. (codable in FEM)

Start/Stop-Automatic enabled in ECO mode
on
off
Engine start/stop automatic is automatically activated in ECO mode. (codable in FEM)

Start in Eco / Eco Pro mode
on
off
When turning on the car, the ‘Eco / Eco Pro’ driving mode is automatically activated. Unfortunately, there is no possibility to automatically start the car in ‘Sport’ or ‘Sport+’ mode. (codable in ICM)

Gear Shift Indicator
Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in CIC)

Headlight Cleaning
Number until headlight cleaning
1
5
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in FEM)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in FEM)

Maximum speed headlight cleaning
6 kph / 4 mph
12 kph / 8 mph
30 kph / 19 mph
50 kph / 31 mph
80 kph / 50 mph
130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in FEM)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in FEM)

Length of splash for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in FEM)

Delay between splashes for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in FEM)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in FEM)

Head-Up Display
Cruise Control in Head-Up Display
on
off
Only change this function with ‘Cruise Control in Head-Up Display 1/2’. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Startscreen HUD
on
off
Show startscreen when HUD starts. (codable in KOMBI)

Entertainment menu in HUD
on
off
Show radio stations and track list in Head-Up Display. (codable in KOMBI)

Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Cruise Control in HUD – addition
on
off
Only change this function with ‘Cruise Control in Head-Up Display ‘. This function needs to be activated in additon. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Voice command in HUD
on
off
Display voice command confirmation information in Head-Up Display. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Cruise Control in Head-Up Display
on
off
Show cruise control in head-up display whenever cruise control is turned on. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the Kombi module. (codable in CIC)

Turn signals in Head-Up Display
on
off
Show menu in the iDrive to turn on signals and hazard lights in the head up display. To activate this function, please activate ‘Turn signals in Head-Up Display’ in the HUD/Kombi module. (codable in CIC)

Highway junction images on HUD
on
off
Show Highway junction images on HUD. (codable in CIC)

Entertainment/Telephone information in HUD
on
off
Adds checkbox in Head Up Display settings for entertainment/telephone in iDrive. To show information for entertainment and telephone, please also activate the HUD functions in the Kombi module. (codable in CIC)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in FEM)
iDrive logo
iDrive start logo
BMW Connected Drive (Version 1)
BMW Connected Drive (Version 2)
M Performance
Alpina Tuning
BMW i
BMW white
BMW brown
Mini
Rolls Royce
BMW Christmas
Logo that is displayed when starting the iDrive system. (codable in NBT)

iDrive start animated
not animated
animated
black screen
Logo that is displayed when starting the iDrive system is animated. Alternatively a black screen without any logo can be displayed. (codable in NBT)

iDrive Menus
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in CIC)

Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in CIC)

Tire pressure menu with temperature
on
off
Also show temperature of the individual tires in the tire pressure menu. This function only works if the tires have tire pressure sensors installed and pressure of the individual tires is already shown. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in CIC)

Message length while driving
no details
one page
up to five pages
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in CIC)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Volume popup
on
off
Show volume popup in the iDrive when changing the volume. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Sport mode configurable in iDrive
on
off
Sport mode can be configured in the iDrive menu. This function needs to be turned on in the iDrive module as well. The function will appear in the iDrive settings under drive mode settings. (codable in ICM)

Instrument Cluster
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Blank information display in dashboard
on
off
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)

Cruise Control speed display
off
3 s
5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)

Date in dashboard
on
off
Show date in dashboard. (codable in KOMBI)

GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Bootlogo for dashboard
BMW
M Performance
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Interior Lights
Welcome lights – Innenbeleuchtung
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights for welcome lights. (codable in FEM)

Interior lighting after unlocking
0s
10s
20s
30s
Interior lighting is turned on for a specific duration after the car is unlocked. (codable in FEM)

Interior lighting after locking
0s
8s
20s
30s
Interior lighting is turned on for a specific duration after the car is locked. (codable in FEM)

Interior lighting after opening trunk lid
on
off
Interior lighting is turned on, when trunk lid is opened. (codable in FEM)

Brightness interior lights after unlock
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights after unlocking the car. (codable in FEM)

Klimatization
Off-Mode Memory
on
off
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)

Save circulation settings
on
off
Circulation settings are saved for next start of the vehicle. (codable in IHKA)

Automatic compressor with air conditioning
on
off
When pressing the ‘Automatic’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic compressor with recirculation
on
off
When pressing the ‘Recirculation’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic reset to circulating air
on
off
Automatically reset to fresh air after a certain time when the recirculation mode of the A/C is active. (codable in IHKA)

Legal Disclaimer
Legal disclaimer (US)
off
on
permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CIC)

Camera disclaimer
off
on
permanent
Show legal disclaimer for rear view camera. (codable in CIC)

Night Vision disclaimer
off
on
permanent
Show legal disclaimer for night vision view camera. (codable in CIC)

Locking
Optical confirmation – locking vehicle
off
1
2
3
Number of times the turn signals are turned on when locking the vehicle. (codable in FEM)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in FEM)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in FEM)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in FEM)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in FEM)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in FEM)

Automatically lock vehicle duration
30s
1 min
2 min
5 min
If no door or window has been opened after the car has been unlocked, the doors automatically lock. Use this function to set the duration after which the car is automatically locked. (codable in FEM)

Threshold speed for vehicle locking
2 kph / 1 mph
4 kph / 2 mph
8 kph / 5 mph
16 kph / 10 mph
24 kph / 15 mph
32 kph / 20 mph
Sets the speed at which the vehicle automatically locks all doors. (codable in FEM)

Unlock car when turned off
on
off
Doors are automatically unlocked, when engine is turned off. Only works if the doors were automatically locked by the car while driving. (codable in FEM)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FZD)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in FZD)

Mirrors
Comfort folding for sideview mirrors
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in FEM)

Auto-Unfold mirrors
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
40 kph / 25 mph
Speed at which folded mirrors are automatically unfolded. (codable in FEM)

Mirror tilt 1/2
on
off
Requirement for mirror tilt functions. (codable in FEM)

Mirror tilt 2/2
on
off
Requirement for mirror tilt functions. (codable in FEM)

Tilt mirror in reverse
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in FEM)

Mirror tilt while reversing
weak
medium
strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in FEM)

Maximum speed mirror fold
10 kph / 6 mph
20 kph / 12 mph
40 kph / 25 mph
60 kph / 37 mph
Maximum speed at which folding the mirrors is possible. (codable in FEM)

Unfold mirrors after comfort close
on
off
Mirrors are automatically unfolded when the car is unlocked, if they were folded by the comfort closing function. (codable in FEM)

Mirror fold with hazard lights
on
off
Mirrors can be folded via comfort closing while hazard lights are active. (codable in FEM)

Navigation
Navigation fuel stop suggestion
on
off
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in CIC)

Route Info
on
off
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in CIC)

Navigation geo coordinates
on
off
Show geo coordinates in latitude and longitude in the navigation menu. (codable in CIC)

Navigation while updating
on
off
Allow using the navigation system while the maps are being updated. (codable in CIC)

Arrow view in main window
on
off
Arrow view is also available in the main window and not only in the split screen window. (codable in CIC)

Navigation current position
on
off
Show option to display current position in the navigation menu. (codable in CIC)

Range map
on
off
Range map is available in the main window as a possible map. (codable in NBT)

Route magnet
on
off
Display route magnet as a possible method for recalculating the active route. (codable in NBT)

Route preview
on
off
Display the route preview menu. This function is also known as ‘Route simulator’. If available, also activate ‘Route preview – addition’. (codable in NBT)

Route preview – addition
on
off
Only change this function with ‘Route preview’. (codable in NBT)

Opening
Optical confirmation – unlocking vehicle
off
1
2
3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in FEM)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in FEM)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in FEM)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in FEM)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in FEM)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in FEM)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in FEM)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in FEM)

Trunk open confirmation with Comfort Access
on
off
Rear turn lights flash when opening the trunk/tail gate with comfort access. (codable in FEM)

Trunk open delay with comfort access
0.0s
0.3s
0.5s
0.7s
1s
When the trunk/tail gate is openend with comfort access, the car delays the opening because of the visual confirmation. Use this function to turn the delay off, so the trunk/tail gate immediately opens. (codable in FEM)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FZD)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in FZD)

Park Distance Control (PDC)
PDC in reverse
on
off
Activate PDC as soon as car is rolling backwards/reversing. (codable in REM)

PDC turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
25 m / 82 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in REM)

PDC turn off – speed limit
when putting in forward gear
1 kph / 1 mph
15 kph / 9 mph
36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in REM)

Reversing camera turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
25 m / 82 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in REM)

Reversing camera turn off – speed limit
when putting in forward gear
1 kph / 1 mph
15 kph / 9 mph
36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in REM)

PDC view
vertical (F-Models)
horizontal (E-Models)
Direction of park distance control view. (codable in CIC)

Warning sound volume front
very weak
weak
medium
strong
very strong
Volume for the warning sound of the front PDC. (codable in PDC)

Warning sound volume rear
very weak
weak
medium
strong
very strong
Volume for the warning sound of the rear PDC. (codable in PDC)

Parking Light
Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the right side. (codable in FEM)

Fog lights with standing lights
on
off
Fog lights can be turned on when the light switch is in the standing lights position. (codable in FEM)

Parking lights
on
off
Parking lights function is active/not active. One sided parking lights are activated by turning on the turn signals after turning off the ignition and locking the car. (codable in FEM)

Power Windows
Continue window action when door is opened
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in FEM)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in FEM)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in FEM)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in FEM)

Rain Light Sensor
Rain light sensor sensitivity
very sensitive
sensitive
normal
insensitive
daytime running lights
Sensitivity of rain light sensor. (codable in FEM)
Rear lights / tail lights
Rear fog lights
on
off
Activate rear fog light function. To activate this function, please also activate the rear fog lights in the REM module. (codable in FEM)

Rear fog light left – 1/2
on
off
Activate left rear fog light. To activate this function, please also activate the rear fog lights in the FEM module. (codable in REM)

Rear fog light left – 2/2
on
off
Only change this function with ‘Rear fog light left – 1/2’. (codable in REM)

Rear fog light right – 1/2
on
off
Activate right rear fog light. To activate this function, please also activate the rear fog lights in the FEM module. (codable in REM)

Rear fog light right – 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in REM)

Seat
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Easy entry/exit aid
off
driver
passenger
When entering/leaving the car the seat is widened (with the lumbar width adjustment) so entering/leaving the car is easier. (codable in SM_FA)

Seat position memory confirmation
on
off
When saving the seat position with the memory buttons in the car, a short Gong sound is played. (codable in SM_FA)

Seating Heater
Seat heater temp. level 1 – armrest front
29°C / 84°F
32°C / 90°F
35°C / 95°F
38°C / 100°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – armrest front
38°C / 100°F
41°C / 106°F
44°C / 111°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – armrest front
44°C / 111°F
47°C / 117°F
50°C / 122°F
53°C / 127°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in FEM)

Seat heater temp. level 1 – seat front
28°C / 82°F
31°C / 88°F
34°C / 93°F
37°C / 99°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – seat front
37°C / 99°F
40°C / 104°F
43°C / 109°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – seat front
43°C / 109°F
46°C / 115°F
49°C / 120°F
52°C / 126°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in FEM)

Seat heater temp. level 1 – armrest rear
29°C / 84°F
32°C / 90°F
35°C / 95°F
38°C / 100°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – armrest rear
38°C / 100°F
41°C / 106°F
44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – armrest rear
44°C / 111°F
47°C / 117°F
50°C / 122°F
53°C / 127°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in FEM)

Seat heater temp. level 1 – seat rear
28°C / 82°F
31°C / 88°F
34°C / 93°F
37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – seat rear
37°C / 99°F
40°C / 104°F
43°C / 109°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – seat rear
43°C / 109°F
46°C / 115°F
49°C / 120°F
52°C / 126°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in FEM)

Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Sidemarker
US Sidemarker left
on
off
off (alternative)
Light for the US Sidemarker on the left side. If switch setting is ‘0’, the function does not have an effect. If switch setting is ‘A’, the function does only have an effect if it’s dark. In addition the brightness has to be set to ‘High’. (codable in FEM)

US Sidemarker left brightness
off
very low
low
medium
high
very high
Brightness of the US Sidemarker on the left side. (codable in FEM)

US Sidemarker right
on
off
off (alternative)
Light for the US Sidemarker on the right side. If switch setting is ‘0’, the function does not have an effect. If switch setting is ‘A’, the function does only have an effect if it’s dark. In addtion the brightness has to be set to ‘High’. (codable in FEM)

US Sidemarker right brightness
off
very low
low
medium
high
very high
Brightness of the US Sidemarker on the right side. (codable in FEM)

Speedometer
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Spoiler
Raising speed for spoiler
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Vehicle speed in kph or mph at which spoiler automatically raises. Raising speed has to be higher than the lowering speed. The lowering speed can be changed with ‘lowering speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Lowering speed for spoiler 2/2
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Only change this function with ‘Lowering speed for spoiler 1/2’. (codable in HKL2)

Lowering speed spoiler 1/2
50 kph / 31 mph
70 kph / 45 mph
90 kph/ 55 mph
Vehicle speed in kph or mph at which spoiler automatically lowers. Lowering speed has to be lower than the raising speed. The raising speed can be changed with ‘Raising speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Sport display
Sport display – unit for performance
hp
kW
Unit for performance in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display – unit for torque
Nm
lb ft
kgm
Unit for torque in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tail gate/Rear lid
Trunk open confirmation with Comfort Access
on
off
Rear turn lights flash when opening the trunk/tail gate with comfort access. (codable in FEM)

Trunk open delay with comfort access
0.0s
0.3s
0.5s
0.7s
1s
When the trunk/tail gate is openend with comfort access, the car delays the opening because of the visual confirmation. Use this function to turn the delay off, so the trunk/tail gate immediately opens. (codable in FEM)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Close trunk with keyfob
on
off
Close the trunk/rear lid via the keyfob. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Close trunk with footwell switch
on
off
Close the trunk/rear lid with the interior footwell switch. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Close trunk with keyfob – addition
on
off
Only change this function with ‘Close trunk with keyfob’. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Tank
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Telephone
Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Selection of ringtone
BMW
Mini
Selection of the ringtone which sounds when a call comes in. To use the ringtone of your phone, please turn ‘Use telephone ringtone’ on. (codable in CIC)

Use telephone ringtone
on
off
Playback of the telephone ringtone on the car speakers. (codable in CIC)

Message length while driving
no details
one page
up to five pages
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Siri Eyes-Free button
on
off
When pressing and holding the voice command button on the steering wheel ‘Siri Eyes-Free’ is activated. This function can only be used by iOS devices. Siri has to be active on the iPhone. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Number of addresses/messages for storing
1
5
10
20
25
30
40
50
Maximum number of messages/addresses to be stored in the car. (codable in COMBOX)

Tire Pressure Monitoring
Tyre pressure monitoring system
on
off
Use this function to turn off the tyre pressure monitoring system (TPMS). This coding can’t be used to retrofit TPMS to a car. (codable in KOMBI)
Tires
Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Turn signals
Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

One-touch turn signal function
1
3
5
7
Number of turn signals when tapping the turn signal. In some cases, this option also needs to be enabled in the iDrive. (codable in FEM)

Optical confirmation – unlocking vehicle
off
1
2
3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in FEM)

Optical confirmation – locking vehicle
off
1
2
3
Number of times the turn signals are turned on when locking the vehicle. (codable in FEM)

Turn signals in Head-Up Display
on
off
Show menu in the iDrive to turn on signals and hazard lights in the head up display. To activate this function, please activate ‘Turn signals in Head-Up Display’ in the HUD/Kombi module. (codable in CIC)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FZD)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FZD)

Alarm with turn signals
on
off
Turn signals blink when alarm is initiated. (codable in FZD)

Video in Motion
Video in motion 1/3
off
3 kph / 2 mph
8 kph / 5 mph
on
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in CIC)

Video in motion 2/3
off
3 kph / 2 mph
10 kph / 6 mph
on
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion 3/3
on
off
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion menu
on
off
Enable menu to activate video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. To deactivate video in motion, please deactivate and activate this coding again and follow the steps afterwards. (codable in NBT)

Video only with handbrake
on
off
Only allow watching video while the handbrake is pulled. In order to watch video while driving, set this function to ‘not active’ and activate all parts of ‘Video in motion’. Video in motion is only possible if the car supports watching TV or playing DVDs while standing. If available, also deactivate ‘Video only with handbrake – addition’. (codable in NBT)

Video format support 1/3
on
off
Enable playback of videos in more video formats. (codable in NBT)

Video format support 2/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

Video format support 3/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

DVD menu button during playing
DVD menu button
title list button
When playing a DVD instead of the ‘Title list’ button a button is shown to activate the own menu of the DVD, like on a DVD player. (codable in NBT)

Video Playback via USB
on
off
off (alternative)
Play videos on a USB-Stick. (codable in NBT)

Video Playback from iPhone
on
off
off (alternative)
Play videos from iPhone. This only works if the iPhone is connected via a snap-in adapter. This does not work if the iPhone is connected via a USB cable. (codable in NBT)

Video only with handbrake – addition
off
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Only change this function with ‘Video only with handbrake’. (codable in NBT)

Voltage Monitoring
Low beams left voltage monit. 1/2
on
off
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in FEM)

Low beams left voltage monit. 2/2
on
off
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Low beams right voltage monit. 1/2
on
off
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in FEM)

Low beams right voltage monit. 2/2
on
off
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

High beams left voltage monit. 1/2
on
off
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in FEM)

High beams left voltage monit. 2/2
on
off
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

High beams right voltage monit. 1/2
on
off
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in FEM)

High beams right voltage monit. 2/2
on
off
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Turn signals front left voltage monit. 1/2
on
off
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in FEM)

Turn signals front left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Turn signals front right voltage monit. 1/2
on
off
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in FEM)

Turn signals front right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Front fog lights left voltage monit. 1/2
on
off
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in FEM)

Front fog lights left voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Front fog lights right voltage monit. 1/2
on
off
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in FEM)

Front fog lights right voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Daytime running lights left voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights left. Might cause flickering of LED lights. (codable in FEM)

Daytime running lights left voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Daytime running lights right voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights right. Might cause flickering of LED lights. (codable in FEM)

Daytime running lights right voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Turn signals front left warning
on
off
Warning for malfunction of Turn signals front left in the on board computer. (codable in FEM)

Turn signals front right warning
on
off
Warning for malfunction of Turn signals front right in the on board computer. (codable in FEM)

Turn signals rear left voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in REM)

Turn signals rear left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Turn signals rear right voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in REM)

Turn signals rear right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Standing lights outer rear left voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear right voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear left voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear right voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Reversing lights left voltage monit. 1/2
on
off
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in REM)

Reversing lights left voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Reversing lights right voltage monit. 1/2
on
off
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in REM)

Reversing lights right voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Rear fog light left voltage monit. 1/2
on
off
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in REM)

Rear fog light left voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Rear fog light right voltage monit. 1/2
on
off
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in REM)

Rear fog light right voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Brake lights left voltage monit. 1/2
on
off
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in REM)

Brake lights left voltage monit. 2/2
on
off
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Brake lights right voltage monit. 1/2
on
off
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in REM)

Brake lights right voltage monit. 2/2
on
off
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Third brake light voltage monit. 1/2
on
off
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in REM)

Third brake light voltage monit. 2/2
on
off
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in REM)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Warnings
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Temperature warning
on
off
Warning for outside temperature below 4° C / 39° F is active/not active. (codable in KOMBI)

Reverse gear gong
on
off
Gong for reverse gear is active/not active. (codable in KOMBI)

Low beams left warning
off
on
on (alternative)
Warning for malfunction of Low beams left in the on board computer. (codable in FEM)

Low beams right warning
off
on
on (alternative)
Warning for malfunction of Low beams right in the on board computer. (codable in FEM)

High beams left warning
on
off
Warning for malfunction of High beams left in the on board computer. (codable in FEM)

High beams right warning
on
off
Warning for malfunction of High beams right in the on board computer. (codable in FEM)

Front fog lights left warning
off
on
on (alternative)
Warning for malfunction of Front fog lights left in the on board computer. (codable in FEM)

Front fog lights right warning
on
off
Warning for malfunction of Front fog lights right in the on board computer. (codable in FEM)

Daytime running lights left warning
off
on
on (alternative)
Warning for malfunction of Daytime running lights left in the on board computer. (codable in FEM)

Daytime running lights right warning
off
on
on (alternative)
on (Japan)
Warning for malfunction of Daytime running lights right in the on board computer. (codable in FEM)

Turn signals rear left warning
on
off
Warning for malfunction of Turn signals rear left in the on board computer. (codable in REM)

Turn signals rear right warning
on
off
Warning for malfunction of Turn signals rear right in the on board computer. (codable in REM)

Standing lights outer rear left warning
on
off
Warning for malfunction of outer rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear right warning
on
off
Warning for malfunction of outer rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear left warning
on
off
Warning for malfunction of inner rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear right warning
on
off
Warning for malfunction of inner rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Reversing lights left warning
on
off
Warning for malfunction of left reversing lights in the on board computer. (codable in REM)

Reversing lights right warning
on
on (alternative)
off
Warning for malfunction of right reversing lights in the on board computer. (codable in REM)

Rear fog light left warning
on
on (alternative)
off
Warning for malfunction of rear left fog light in the on board computer. (codable in REM)

Rear fog light right warning
on
on (alternative)
off
Warning for malfunction of rear right fog light in the on board computer. (codable in REM)

Brake lights left warning
on
off
Warning for malfunction of left braking lights in the on board computer. (codable in REM)

Brake lights right warning
on
off
Warning for malfunction of right braking lights in the on board computer. (codable in REM)

Third brake light warning
on
off
Warning for malfunction of third brake light in the on board computer. (codable in REM)

License plate light warning
on
off
Warning for malfunction of license plate lights in the on board computer. (codable in REM)

Seat belt reminder driver
on
off
Seat belt reminder for driver is active/ inactive. (codable in CSM)

Seat belt reminder passenger
on
off
Seat belt reminder for passenger is active/ inactive. (codable in CSM)

Seat belt reminder – distance
100 m / 330 ft
200 m / 660 ft
500 m / 0.31 mls
1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in CSM)

Seat belt reminder – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in CSM)

Seat belt reminder – duration
5s
10s
30s
60s
90s
100s
120s
Duration of seat belt reminder warnings. (codable in CSM)

Seat belt reminder – driver unbuckled
on
off
When the driver unbuckles his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt reminder – passenger unbuckled
on
off
When the passenger unbuckles his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt reminder – ignition on
on
off
When the ignition is turned on and the driver has not put on his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt status display driver
on
off
Display of the seat belt status for the driver (buckled/unbuckled) in the dashboard. (codable in CSM)

Seat belt status display passenger
on
off
Display of the seat belt status for the passenger (buckled/unbuckled) in the dashboard. (codable in CSM)

Seat belt status display rear seats
on
off
Display of the seat belt status for the rear seats (buckled/unbuckled) in the dashboard. (codable in CSM)

Welcome Light
Welcome lights
on
off
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in FEM)

Welcome-lights – light switch position
off
A
A or 2
Positions for the light switch where the welcome-lights function is activated. (codable in FEM)

Welcome lights – brightness
off
very low
low
medium
high
very high
Brightness of exterior lights for welcome lights. (codable in FEM)

Welcome lights duration
10s
20s
40s
90s
150s
240s
Duration of the welcome lights in seconds. (codable in FEM)

Welcome lights – standing lights front left
off
turn on softly
turn on hard
Standing lights front left are turned on with welcome lights. (codable in FEM)

Welcome lights – standing lights front right
off
turn on softly
turn on hard
Standing lights front right are turned on with welcome lights. (codable in FEM)

Welcome lights – DRL left
off
turn on softly
turn on hard
Daytime running lights left are turned on with welcome lights. (codable in FEM)

Welcome lights – DRL right
off
turn on softly
turn on hard
Daytime running lights right are turned on with welcome lights. (codable in FEM)

Welcome lights – low beams left
off
turn on softly
turn on hard
Low beams left are turned on with welcome lights. (codable in FEM)

Welcome lights – low beams right
off
turn on softly
turn on hard
Low beams right are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal front left
off
turn on softly
turn on hard
Turn signal front left are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal front right
off
turn on softly
turn on hard
Turn signal front right are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal mid left
off
turn on softly
turn on hard
Turn signal mid (mirrors) left are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal mid right
off
turn on softly
turn on hard
Turn signal mid (mirrors) right are turned on with welcome lights. (codable in FEM)

Welcome lights – design lights left
off
turn on softly
turn on hard
Design lights left are turned on with welcome lights. (codable in FEM)

Welcome lights – design lights right
off
turn on softly
turn on hard
Design lights right are turned on with welcome lights. (codable in FEM)

Welcome lights – high beams left
off
turn on softly
turn on hard
High beams left are turned on with welcome lights. (codable in FEM)

Welcome lights – high beams right
off
turn on softly
turn on hard
High beams right are turned on with welcome lights. (codable in FEM)

Welcome lights – front fog lights left
off
turn on softly
turn on hard
Front fog lights left are turned on with welcome lights. (codable in FEM)

Welcome lights – front fog lights right
off
turn on softly
turn on hard
Front fog lights right are turned on with welcome lights. (codable in FEM)

Welcome lights – Innenbeleuchtung
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights for welcome lights. (codable in FEM)

Brightness interior lights after unlock
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights after unlocking the car. (codable in FEM)

Welcome lights – only when dark
on
off
Welcome lights are only turned on when the rain-light sensor (RLS) recognizes it is dark outside. Only works if rain-light sensor is installed. (codable in FEM)

Welcome lights – turn signals rear left
off
turn on softly
turn on hard
Turn signals rear left are turned on with welcome lights. (codable in REM)

Welcome lights – turn signals rear right
off
turn on softly
turn on hard
Turn signals rear right are turned on with welcome lights. (codable in REM)

Welcome lights – stand. lights outer rear left
off
turn on softly
turn on hard
Outer standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – stand. lights outer rear right
off
turn on softly
turn on hard
Outer standing lights rear right are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – stand. lights inner rear left
off
turn on softly
turn on hard
Inner standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – stand. lights inner rear right
off
turn on softly
turn on hard
Inner standing lights rear right are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – reversing lights left
off
turn on softly
turn on hard
Reversing lights left are turned on with welcome lights. (codable in REM)

Welcome lights – reversing lights right
off
turn on softly
turn on hard
Reversing lights right are turned on with welcome lights. (codable in REM)

Welcome lights – rear fog lights left
off
turn on softly
turn on hard
Rear left fog lights are turned on with welcome lights. (codable in REM)

Welcome lights – rear fog lights right
off
turn on softly
turn on hard
Rear right fog lights are turned on with welcome lights. (codable in REM)

Welcome lights – braking lights left
off
turn on softly
turn on hard
Braking lights left are turned on with welcome lights. (codable in REM)

Welcome lights – braking lights right
off
turn on softly
turn on hard
Braking lights right are turned on with welcome lights. (codable in REM)

Welcome lights – third brake light
off
turn on softly
turn on hard
Third brake light is turned on with welcome lights. (codable in REM)

Welcome lights – number plate lighting
off
turn on softly
turn on hard
Number plate lights are turned on with welcome lights. (codable in REM)

Active Sound Design
Active Sound Design Mode
off
M5/M6
Mode for Active Sound Design. The Active Sound Design module produces an amplified exhaust sound in the interior through the speakers. If you disable this function a fault code in the ASD might appear. To remove this fault code restore the ASD from ist original backup, since the fault code appeared because the ASD has been disabled. (codable in ASD)

Active Sound Design Volume
very quiet
quiet
medium
loud
very loud
Volume for active sound design. (codable in ASD)

Alarm System
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in NBT)

Optical confirmation – tail gate
off
on
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in GFZD)

Alarm type
Europe/USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in GFZD)

Audible confirmation – length
very short
short
medium
long
very long
Length of audible confirmation chirp. (codable in GFZD)

Audible confirmation – pitch
very low
low
medium
high
very high
Pitch for audible confirmation. (codable in GFZD)

Audible confirmation – min. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Minimum volume for the audible confirmation chirp. (codable in GFZD)

Audible confirmation – max. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Maximum volume for the audible confirmation chirp. (codable in GFZD)

Alarm with turn signals
off
on
Turn signals blink when alarm is initiated. (codable in GFZD)

Alarm with dimmed headlights
off
on
Dimmed headlights blink when alarm is initiated. (codable in GFZD)

Alarm with high beams
off
on
High beams blink when alarm is initiated. (codable in GFZD)

Audible confirmation – locking vehicle
off
after locking and closing all doors
after locking
Audible confirmation for locking vehicle is active/not active. (codable in GFZD)

Ambient lighting
Individual ambient light
on
off
Show menu in iDrive to individualize ambient light. Functions depend on the installed lights. (codable in NBT)
Audio
Maximum volume when ignition on
quiet
medium
loud
Maximum volume for radio/music when the vehicle is turned on. The volume of the last drive is used. (codable in NBT)

Warning and menu sounds
BMW
Mini
BMW i
Rolls Royce
Depending on the manufacturer of the vehicle (BMW, Mini, BMW i or Rolls Royce) different sounds are used for warnings and menus. Use this feature to change the sounds to a different brand, for example from ‘BMW’ to ‘Rolly Royce’. (codable in NBT)

Audio source iPhone 1/2
on
on (alternative)
off
If an iPhone is connected via USB (either in the glove box or in the center console) it can be used as an audio source. (codable in NBT)

Audio source iPhone 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Brake lights
Brake force display – lights
rear turn signals
brake lights
third braking light
Lights to be used for brake force display. (codable in GBDCMAIN)

Brake force display – minimum speed
5 kph / 3 mph
10 kph / 6 mph
30 kph / 19 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in GBDCMAIN)

Cleaning
Threshold washer fluid warning
low
medium
high
very high
Threshold at which the washer fluid warning is turned on. The higher the threshold to activate this warning, the sooner this warning will be shown. (codable in GBDCMAIN)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in GBDCMAIN)

Number of wipes after rear window cleaning
off
1
2
3
4
Number of wipes after rear window is cleaned. (codable in GBDCMAIN)

Wiping interval rear window
off
2s
4s
6s
8s
10s
12s
15s
Interval in seconds for windscreen rear window wipers. (codable in GBDCMAIN)

Reduce wiper speed
off
130 kph / 80 mph
170 kph / 105 mph
210 kph / 130 mph
Threshold at which the wiper speed is reduced. (codable in GBDCMAIN)

Rear window cleaning with low washer liquid
on
off
Rear windows are also cleaned even though the washer fluid level is low. (codable in GBDCMAIN)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Number until headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in GBDCMAIN)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in GBDCMAIN)

Length of splash for head lights
0.4 s
0.5 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in GBDCMAIN)

Delay between splashes for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in GBDCMAIN)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Comfort Functions
Door lock after driving away
on
off
Show menu in iDrive to activate door lock after driving away in vehicle settings ‘Doors/Key’. (codable in NBT)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in GBDCWINDOWS)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in GBDCWINDOWS)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in GBDCWINDOWS)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in GBDCWINDOWS)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in GBDCWINDOWS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in GBDCWINDOWS)

Daytime Running Lights
Daytime running lights
display menu
permanently on
permanently off
Set mode of daytime running lights. Set to ‘display menu’ to display a menu in the iDrive settings for changing the mode of daytime running lights. (codable in NBT)

Daytime running lights – light switch
off
A or 0
A, 0 or 1
Positions for the light switch where the daytime running lights function is activated. (codable in GBDCMAIN)

Display
Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Display ‘Diesel’ next to fuel level
on
off
Use this function to show the diesel sign next to fuel level indicator in the Kombi display. Not available in sports mode. (codable in KOMBI)

Display engine power
on
off
Use this function to show horsepowers in the instrument cluster below the rev counter. This display is only active in sports mode. (codable in KOMBI)

Display Layout Kombi
BMW AG
M GmbH
Alpina Tuning
Use this function to change the layout of your Kombi display. When select ‘Alpina’ please also enable ‘Display Layout Kombi – Alpina’ aktiviert werden. (codable in KOMBI)

Display Layout Kombi – Alpina
on
off
Only change this coding in combination with ‘Display Layout Kombi’ when ‘Alpina’ is selected. When coding is active for some models the fuel level may not be calculated correctly. This is because Alpina models normally have larger fuel tanks than 60 liters. Therefore, please check the fuel indicator after coding this function. (codable in KOMBI)

Logo KOMBI
no logo
edrive
M-Sport
m550i
m550d
m40d
m760i
m760il
B7 Biturbo
B7
B6 Biturbo
B6
B5 Biturbo
D5 Biturbo
XD3 Biturbo
m750ld
m750d
V12
Use this function so change the logo inside KOMBI display. Not available in M view. (codable in KOMBI)

ECO PRO layout change
on
off
Show menu in iDrive to activate/deactivate the layout change of the instrument cluster when changing to ECO Pro mode. (codable in NBT)

Instant fuel consumption
on
off
Activate an iDrive menu to show the instant fuel consumption display in the instrument cluster. (codable in NBT)

Drive mode warning
on
off
Show menu in iDrive to activate/deactivate the warning message after chaging the drive mode. (codable in NBT)

Speedometer Zoom
on
off
Show menu in iDrive to activate highlighting the current speed in the speedometer. (codable in NBT)

X View menu
on
off
Show ‘X View’ menu in the iDrive. In this menu you can check the current pitch and roll of your vehicle. This option is only available for vehicles with all-wheel-drive. (codable in NBT)

Automatic clock change 1/2
on
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 2/2’. (codable in NBT)

Bang Olufsen sound menu
on
on (alternative)
off
Show Bang and Olufsen menu in iDrive. Use this menu to access special Bang and Olufsen equalizer settings. Some functions depend on the installed speakers. (codable in NBT)

M-driving dynamics
on
off
Show menu in iDrive inside instrument cluster settings to activate M-driving dynamics. These menu options can only be used in M model cars. (codable in NBT)

Show KW/MW radio band
on
show MW menu
show KW menu
off
Use this function to enable or hide the MW and KW menus in the radio menu. (codable in NBT)

Automatic time setting 2/2
on
on (alternative)
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 1/2’. (codable in NBT)

Drive assistant
Blind spot detection – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Speed at which the blind spot detection is turned on. This function has only an effect if the car is equipped with a blind spot detection. (codable in ICM)
Drive dynamic
Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in NBT)
Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GBDCWINDOWS)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in GBDCWINDOWS)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in GBDCWINDOWS)

Engine Start Stop
Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Start in Eco / Eco Pro mode
on
off
When turning on the car, the ‘Eco / Eco Pro’ driving mode is automatically activated. Unfortunately, there is no possibility to automatically start the car in ‘Sport’ or ‘Sport+’ mode. (codable in ICM)

Start/Stop-Automatic memory
on
off
Setting for Start/Stop-Automatic is saved. This way the manual setting of the Start/Stop-Automatic button, i.e. whether the button is turned on or off, is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in DME)

Default User Mode
Sport Dynamic
Sport Expert
Sport Individual
Comfort
Comfort Plus
Comfort Individual
Eco Pro Efficient
Eco Pro Plus
Eco Pro Individual
PHEV Sport Individual
PHEV Hybrid Standard
PHEV Electric Standard
PHEV Electric Individual
Adaptive
PHEV Sport Standard
Use this coding to select the driving mode at engine start. If the selected mode is not available default value is delected automatically. (codable in GBDCMAIN)

Start/Stop-Automatic default off
on
off
Engine start/stop automatic is turned off by default. (codable in GBDCMAIN)

Gear Shift Indicator
Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in NBT)

Headlight Cleaning
Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Number until headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in GBDCMAIN)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in GBDCMAIN)

Length of splash for head lights
0.4 s
0.5 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in GBDCMAIN)

Delay between splashes for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in GBDCMAIN)

Head-Up Display
Cruise Control in Head-Up Display
on
off
Only change this function with ‘Cruise Control in Head-Up Display 1/2’. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Startscreen HUD
on
off
Show startscreen when HUD starts. (codable in KOMBI)

Entertainment menu in HUD
on
off
Show radio stations and track list in Head-Up Display. (codable in KOMBI)

Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Cruise Control in HUD – addition
on
off
Only change this function with ‘Cruise Control in Head-Up Display ‘. This function needs to be activated in additon. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Voice command in HUD
on
off
Display voice command confirmation information in Head-Up Display. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Highway junction images on HUD
on
off
Show Highway junction images on HUD. (codable in NBT)

Cruise Control in Head-Up Display
on
off
Show cruise control in head-up display whenever cruise control is turned on. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the Kombi module. (codable in NBT)

Entertainment/Telephone information in HUD
on
off
Adds checkbox in Head Up Display settings for entertainment/telephone in iDrive. To show information for entertainment and telephone, please also activate the HUD functions in the Kombi module. (codable in NBT)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in GBDCMAIN)
iDrive logo
iDrive start logo
BMW Connected Drive (Version 1)
BMW Connected Drive (Version 2)
M Performance
Alpina Tuning
BMW i
BMW white
BMW brown
Mini
Rolls Royce
BMW Christmas
Logo that is displayed when starting the iDrive system. (codable in NBT)

iDrive start animated
not animated
animated
black screen
Logo that is displayed when starting the iDrive system is animated. Alternatively a black screen without any logo can be displayed. (codable in NBT)

iDrive Menus
Message length while driving
no details
one page
up to three lines
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in NBT)

Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in NBT)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in NBT)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in NBT)

Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in NBT)

Tire pressure menu with temperature
on
off
Also show temperature of the individual tires in the tire pressure menu. This function only works if the tires have tire pressure sensors installed and pressure of the individual tires is already shown. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in NBT)

Volume popup
on
off
Show volume popup in the iDrive when changing the volume. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Sport mode configurable in iDrive
on
off
Sport mode can be configured in the iDrive menu. This function needs to be turned on in the iDrive module as well. The function will appear in the iDrive settings under drive mode settings. (codable in ICM)

Instrument Cluster
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Blank information display in dashboard
on
off
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)

Cruise Control speed display
off
3 s
5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)

Date in dashboard
on
off
Show date in dashboard. (codable in KOMBI)

GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Bootlogo for dashboard
BMW
M Performance
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Klimatization
Off-Mode Memory
on
off
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)

Save circulation settings
on
off
Circulation settings are saved for next start of the vehicle. (codable in IHKA)

Automatic compressor with air conditioning
on
off
When pressing the ‘Automatic’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic compressor with recirculation
on
off
When pressing the ‘Recirculation’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic reset to circulating air
on
off
Automatically reset to fresh air after a certain time when the recirculation mode of the A/C is active. (codable in IHKA)

Legal Disclaimer
Legal disclaimer (US)
off
on
permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in NBT)

Camera disclaimer
off
on
permanent
Show legal disclaimer for rear view camera. (codable in NBT)

Night Vision disclaimer
off
on
permanent
Show legal disclaimer for night vision view camera. (codable in NBT)

Locking
Optical confirmation – locking vehicle
off
after locking and closing all doors
after locking
Optical confirmation for locking vehicle is active/not active. (codable in GFZD)

Optical confirmation – tail gate
off
on
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in GFZD)

Audible confirmation – locking vehicle
off
after locking and closing all doors
after locking
Audible confirmation for locking vehicle is active/not active. (codable in GFZD)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in GBDCWINDOWS)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in GBDCWINDOWS)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in GBDCWINDOWS)

Mirrors
Comfort folding for sideview mirrors
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in GBDCMAIN)

Unfold mirrors after comfort close
on
off
Mirrors are automatically unfolded when the car is unlocked, if they were folded by the comfort closing function. (codable in GBDCMAIN)

Mirror tilt 1/2
on
off
Requirement for mirror tilt functions. (codable in GBDCMAIN)

Mirror tilt 2/2
on
off
Requirement for mirror tilt functions. (codable in GBDCMAIN)

Tilt mirror in reverse
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in GBDCMAIN)

Mirror tilt while reversing
weak
medium
strong
very strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in GBDCMAIN)

Mirror fold with hazard lights
on
off
Mirrors can be folded via comfort closing while hazard lights are active. (codable in GBDCMAIN)

Navigation
Navigation fuel stop suggestion
on
off
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in NBT)

Route Info
on
off
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in NBT)

Navigation current position
on
off
Show option to display current position in the navigation menu. (codable in NBT)

Navigation geo coordinates
on
off
Show geo coordinates in latitude and longitude in the navigation menu. (codable in NBT)

Navigation while updating
on
off
Allow using the navigation system while the maps are being updated. (codable in NBT)

Range map
on
off
Range map is available in the main window as a possible map. (codable in NBT)

Route magnet
on
off
Display route magnet as a possible method for recalculating the active route. (codable in NBT)

Route preview
on
off
Display the route preview menu. This function is also known as ‘Route simulator’. If available, also activate ‘Route preview – addition’. (codable in NBT)

Route preview – addition
on
off
Only change this function with ‘Route preview’. (codable in NBT)

Opening
Optical confirmation – unlocking vehicle
off
on
Optical confirmation for unlocking vehicle is active/not active. (codable in GFZD)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in GBDCWINDOWS)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in GBDCWINDOWS)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in GBDCWINDOWS)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GBDCWINDOWS)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in GBDCWINDOWS)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in GBDCWINDOWS)

Park Distance Control (PDC)
PDC view
vertical (F-Models)
horizontal (E-Models)
Direction of park distance control view. (codable in NBT)

PDC in reverse
on
off
Activate PDC as soon as car is rolling backwards/reversing. (codable in PDC)

Warning sound volume front
very weak
weak
medium
strong
very strong
Volume for the warning sound of the front PDC. (codable in PDC)

Warning sound volume rear
very weak
weak
medium
strong
very strong
Volume for the warning sound of the rear PDC. (codable in PDC)

PDC turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
20 m / 66 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)

PDC turn off – speed limit
when putting in forward gear
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)

Reversing camera turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
20 m / 66 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)

Reversing camera turn off – speed limit
when putting in forward gear
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)

Parking Light
Fog lights with standing lights
on
off
Fog lights can be turned on when the light switch is in the standing lights position. (codable in GBDCMAIN)

Parking lights
on
off
Parking lights function is active/not active. One sided parking lights are activated by turning on the turn signals after turning off the ignition and locking the car. (codable in GBDCMAIN)

Power Windows
Continue window action when door is opened
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in GBDCWINDOWS)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GBDCWINDOWS)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in GBDCWINDOWS)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in GBDCWINDOWS)

Rain Light Sensor
Rain light sensor sensitivity
very sensitive
sensitive
normal
insensitive
daytime running lights
standard
Sensitivity of rain light sensor. (codable in GBDCMAIN)
Rear lights / tail lights
Rear fog lights
on
off
Activate rear fog light function. To activate this function, please also activate the rear fog lights in the REM module. (codable in GBDCMAIN)
Seat
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Easy entry/exit aid
off
driver
passenger
When entering/leaving the car the seat is widened (with the lumbar width adjustment) so entering/leaving the car is easier. (codable in SM_FA)

Seat position memory confirmation
on
off
When saving the seat position with the memory buttons in the car, a short Gong sound is played. (codable in SM_FA)

Seating Heater
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Seat heater temp. level 1 – armrest front
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – armrest front
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – armrest front
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in GBDCMAIN)

Seat heater temp. level 1 – seat front
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – seat front
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – seat front
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
51°C / 124°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in GBDCMAIN)

Seat heater temp. level 1 – armrest rear
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – armrest rear
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – armrest rear
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in GBDCMAIN)

Seat heater temp. level 1 – seat rear
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – seat rear
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – seat rear
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in GBDCMAIN)

Speedometer
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Spoiler
Raising speed for spoiler
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Vehicle speed in kph or mph at which spoiler automatically raises. Raising speed has to be higher than the lowering speed. The lowering speed can be changed with ‘lowering speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Lowering speed for spoiler 2/2
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Only change this function with ‘Lowering speed for spoiler 1/2’. (codable in HKL2)

Lowering speed spoiler 1/2
50 kph / 31 mph
70 kph / 45 mph
90 kph/ 55 mph
Vehicle speed in kph or mph at which spoiler automatically lowers. Lowering speed has to be lower than the raising speed. The raising speed can be changed with ‘Raising speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Sport display
Sport display – unit for performance
hp
kW
Unit for performance in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display – unit for torque
Nm
lb ft
kgm
Unit for torque in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in NBT)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tail gate/Rear lid
Optical confirmation – tail gate
off
on
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in GFZD)

Close trunk with keyfob
on
off
Close the trunk/rear lid via the keyfob. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL2)

Close trunk with footwell switch
on
off
Close the trunk/rear lid with the interior footwell switch. (codable in HKL2)

Close trunk with keyfob – addition
on
off
Only change this function with ‘Close trunk with keyfob’. (codable in HKL2)

Tank
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Telephone
Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Message length while driving
no details
one page
up to three lines
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in NBT)

Selection of ringtone
BMW
Mini
Selection of the ringtone which sounds when a call comes in. To use the ringtone of your phone, please turn ‘Use telephone ringtone’ on. (codable in NBT)

Use telephone ringtone
on
off
Playback of the telephone ringtone on the car speakers. (codable in NBT)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Siri Eyes-Free button
on
off
When pressing and holding the voice command button on the steering wheel ‘Siri Eyes-Free’ is activated. This function can only be used by iOS devices. Siri has to be active on the iPhone. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Tire Pressure Monitoring
Tyre pressure monitoring system
on
off
Use this function to turn off the tyre pressure monitoring system (TPMS). This coding can’t be used to retrofit TPMS to a car. (codable in KOMBI)
Tires
Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Turn signals
Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Optical confirmation – unlocking vehicle
off
on
Optical confirmation for unlocking vehicle is active/not active. (codable in GFZD)

Optical confirmation – locking vehicle
off
after locking and closing all doors
after locking
Optical confirmation for locking vehicle is active/not active. (codable in GFZD)

Alarm with turn signals
off
on
Turn signals blink when alarm is initiated. (codable in GFZD)

Video in Motion
Video in motion menu
on
off
Enable menu to activate video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. To deactivate video in motion, please deactivate and activate this coding again and follow the steps afterwards. (codable in NBT)

Video in motion 1/3
off
3 kph / 2 mph
8 kph / 5 mph
on
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in NBT)

Video in motion 2/3
off
3 kph / 2 mph
10 kph / 6 mph
on
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in NBT)

Video in motion 3/3
on
off
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in NBT)

Video only with handbrake
on
off
Only allow watching video while the handbrake is pulled. In order to watch video while driving, set this function to ‘not active’ and activate all parts of ‘Video in motion’. Video in motion is only possible if the car supports watching TV or playing DVDs while standing. If available, also deactivate ‘Video only with handbrake – addition’. (codable in NBT)

Video format support 1/3
on
off
Enable playback of videos in more video formats. (codable in NBT)

Video format support 2/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

Video format support 3/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

DVD menu button during playing
DVD menu button
title list button
When playing a DVD instead of the ‘Title list’ button a button is shown to activate the own menu of the DVD, like on a DVD player. (codable in NBT)

Video Playback via USB
on
off
off (alternative)
Play videos on a USB-Stick. (codable in NBT)

Video Playback from iPhone
on
off
off (alternative)
Play videos from iPhone. This only works if the iPhone is connected via a snap-in adapter. This does not work if the iPhone is connected via a USB cable. (codable in NBT)

Video only with handbrake – addition
off
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Only change this function with ‘Video only with handbrake’. (codable in NBT)

Voltage Monitoring
Low beams left voltage monit. 1/2
on
off
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Low beams left voltage monit. 2/2
on
off
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Low beams right voltage monit. 1/2
on
off
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Low beams right voltage monit. 2/2
on
off
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

High beams left voltage monit. 1/2
on
off
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in GBDCMAIN)

High beams left voltage monit. 2/2
on
off
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

High beams right voltage monit. 1/2
on
off
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in GBDCMAIN)

High beams right voltage monit. 2/2
on
off
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals front left voltage monit. 1/2
on
off
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals front left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals front right voltage monit. 1/2
on
off
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals front right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Front fog lights left voltage monit. 1/2
on
off
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Front fog lights left voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Front fog lights right voltage monit. 1/2
on
off
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Front fog lights right voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights left voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights left voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights right voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights right voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals front left warning
on
off
Warning for malfunction of Turn signals front left in the on board computer. (codable in GBDCMAIN)

Turn signals front right warning
on
off
Warning for malfunction of Turn signals front right in the on board computer. (codable in GBDCMAIN)

Turn signals rear left voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals rear left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals rear right voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals rear right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Standing lights outer rear left voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear right voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear left voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear right voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Reversing lights left voltage monit. 1/2
on
off
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Reversing lights left voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Reversing lights right voltage monit. 1/2
on
off
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Reversing lights right voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Rear fog light left voltage monit. 1/2
on
off
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in GBDCMAIN)

Rear fog light left voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Rear fog light right voltage monit. 1/2
on
off
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in GBDCMAIN)

Rear fog light right voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Brake lights left voltage monit. 1/2
on
off
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Brake lights left voltage monit. 2/2
on
off
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Brake lights right voltage monit. 1/2
on
off
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Brake lights right voltage monit. 2/2
on
off
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Third brake light voltage monit. 1/2
on
off
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in GBDCMAIN)

Third brake light voltage monit. 2/2
on
off
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in GBDCMAIN)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Warnings
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Temperature warning
on
off
Warning for outside temperature below 4° C / 39° F is active/not active. (codable in KOMBI)

Reverse gear gong
on
off
Gong for reverse gear is active/not active. (codable in KOMBI)

Seat belt reminder driver
on
off
Seat belt reminder for driver is active/ inactive. (codable in GCSMSEATBELTS)

Seat belt reminder passenger
on
off
Seat belt reminder for passenger is active/ inactive. (codable in GCSMSEATBELTS)

Seat belt reminder – distance
100 m / 330 ft
200 m / 660 ft
500 m / 0.31 mls
1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in GCSMSEATBELTS)

Seat belt reminder – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in GCSMSEATBELTS)

Seat belt reminder – duration
5s
10s
30s
60s
90s
100s
120s
Duration of seat belt reminder warnings. (codable in GCSMSEATBELTS)

Seat belt reminder – ignition on
on
off
When the ignition is turned on and the driver has not put on his/her seat belt a short seat belt reminder warning is activated. (codable in GCSMSEATBELTS)

Seat belt status display driver
on
off
Display of the seat belt status for the driver (buckled/unbuckled) in the dashboard. (codable in GCSMSEATBELTS)

Seat belt status display passenger
on
off
Display of the seat belt status for the passenger (buckled/unbuckled) in the dashboard. (codable in GCSMSEATBELTS)

Seatbelt Reminder Driver
on
off
Deactivate the driver’s acustic seatbelt reminder. To undo the coding run the backup. (codable in GCSMSEATBELTS)

Seatbelt Reminder Passenger
on
off
Deactivate the passenger’s acustic seatbelt reminder. To undo the coding run the backup. (codable in GCSMSEATBELTS)

Seatbelt Display Reminder Driver
on
off
Deactivate/activate the driver’s optical seatbelt reminder inside KOMBI. (codable in GCSMSEATBELTS)

Seatbelt Display Reminder Passenger
on
off
Deactivate/activate the passenger’s optical seatbelt reminder inside KOMBI. (codable in GCSMSEATBELTS)

Low beams left warning
on
off
Warning for malfunction of Low beams left in the on board computer. (codable in GBDCMAIN)

Low beams right warning
on
off
Warning for malfunction of Low beams right in the on board computer. (codable in GBDCMAIN)

High beams left warning
on
off
Warning for malfunction of High beams left in the on board computer. (codable in GBDCMAIN)

High beams right warning
on
off
Warning for malfunction of High beams right in the on board computer. (codable in GBDCMAIN)

Front fog lights left warning
on
off
Warning for malfunction of Front fog lights left in the on board computer. (codable in GBDCMAIN)

Front fog lights right warning
on
on (alternative)
off
Warning for malfunction of Front fog lights right in the on board computer. (codable in GBDCMAIN)

Daytime running lights left warning
on
on (alternative)
off
Warning for malfunction of Daytime running lights left in the on board computer. (codable in GBDCMAIN)

Daytime running lights right warning
on
on (alternative)
off
Warning for malfunction of Daytime running lights right in the on board computer. (codable in GBDCMAIN)

Turn signals rear left warning
on
on (alternative)
off
Warning for malfunction of Turn signals rear left in the on board computer. (codable in GBDCMAIN)

Turn signals rear right warning
on
on (alternative)
off
Warning for malfunction of Turn signals rear right in the on board computer. (codable in GBDCMAIN)

Standing lights outer rear left warning
on
on (alternative)
off
Warning for malfunction of outer rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear right warning
on
on (alternative)
off
Warning for malfunction of outer rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear left warning
on
off
Warning for malfunction of inner rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear right warning
on
off
Warning for malfunction of inner rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Reversing lights left warning
on
on (alternative)
off
Warning for malfunction of left reversing lights in the on board computer. (codable in GBDCMAIN)

Reversing lights right warning
on
off
Warning for malfunction of right reversing lights in the on board computer. (codable in GBDCMAIN)

Rear fog light left warning
on
on (alternative)
off
Warning for malfunction of rear left fog light in the on board computer. (codable in GBDCMAIN)

Rear fog light right warning
on
on (alternative)
off
Warning for malfunction of rear right fog light in the on board computer. (codable in GBDCMAIN)

Brake lights left warning
on
on (alternative)
off
Warning for malfunction of left braking lights in the on board computer. (codable in GBDCMAIN)

Brake lights right warning
on
on (alternative)
off
Warning for malfunction of right braking lights in the on board computer. (codable in GBDCMAIN)

Third brake light warning
on
off
Warning for malfunction of third brake light in the on board computer. (codable in GBDCMAIN)

License plate light warning
on
off
Warning for malfunction of license plate lights in the on board computer. (codable in GBDCMAIN)

Welcome Light
Welcome lights
on
off
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in GBDCMAIN)

Welcome lights – only when dark
on
off
Welcome lights are only turned on when the rain-light sensor (RLS) recognizes it is dark outside. Only works if rain-light sensor is installed. (codable in GBDCMAIN)

Welcome lights – brightness
off
very low
low
medium
high
very high
Brightness of exterior lights for welcome lights. (codable in GBDCMAIN)

2 series

F2x, F87 (2013 - now)F45, F46 (2014 - now)F44 (2020 - now)
Active Sound Design
Active Sound Design Mode
off
M5/M6
Mode for Active Sound Design. The Active Sound Design module produces an amplified exhaust sound in the interior through the speakers. If you disable this function a fault code in the ASD might appear. To remove this fault code restore the ASD from ist original backup, since the fault code appeared because the ASD has been disabled. (codable in ASD)

Active Sound Design Volume
very quiet
quiet
medium
loud
very loud
Volume for active sound design. (codable in ASD)

Alarm System
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in CIC)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Audible confirmation at night
on
off
Between 8:00 PM and 8:00 AM the volume of the sound for the audible confirmation for locking/unlocking the vehicle is automatically turned lower. (codable in FZD)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Alarm type
Europe
USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in FZD)

Audible confirmation – length
very short
short
medium
long
very long
Length of audible confirmation chirp. (codable in FZD)

Audible confirmation – pitch
very low
low
medium
high
very high
Pitch for audible confirmation. (codable in FZD)

Audible confirmation – min. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Minimum volume for the audible confirmation chirp. (codable in FZD)

Audible confirmation – max. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Maximum volume for the audible confirmation chirp. (codable in FZD)

Alarm with sound
on
off
Use this function to turn the alarm sound completely off. When an alarm is triggered only the lights will flash. This also disables the audible confirmation when locking the vehicle. (codable in FZD)

Alarm at night
on
off
Between 8:00 PM and 8:00 AM the alarm is automatically turned off. In this time the audible confirmation for locking/unlocking the vehicle is also turned off. (codable in FZD)

Alarm with turn signals
on
off
Turn signals blink when alarm is initiated. (codable in FZD)

Alarm with dimmed headlights
on
off
Dimmed headlights blink when alarm is initiated. (codable in FZD)

Alarm with high beams
on
off
High beams blink when alarm is initiated. (codable in FZD)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in FZD)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in FZD)

Ambient lighting
Ambient lighting brightness 1/2
same brightness as speedometer
own brightness
Usually the brightness of the ambient lighting is automatically adjusted to the brightness of the speedometer illumination. To set the brightness indepently from the speedometer illumination, set this function to ‘own brightness’. The brightness of the ambient lighting can then be changed with ‘Ambient lighting brightness 2/2’. (codable in FEM)

Ambient lighting brightness 2/2
very low
low
rather low
medium
rather high
high
very high
Own brightness for ambient lighting. In order to activate this function, set ‘Ambient lighting brightness’ to ‘own brightness’. (codable in FEM)

Individual ambient light
on
off
Show menu in iDrive to individualize ambient light. Functions depend on the installed lights. (codable in NBT)

Angel Eyes
Angel eyes brightn. left daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightn. right daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the right side. (codable in FEM)

Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the right side. (codable in FEM)

Angel eyes brightness parking lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for parking lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightness parking lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for parking lights. This function controls the brightness of the right side. (codable in FEM)

Audio
iDrive off when open door
on
off
Radio and Navigation turn off when the driver door is opened. This function doesn’t have an effect while engine is running. (codable in FEM)

Maximum volume when ignition on
quiet
medium
loud
Maximum volume for radio/music when the vehicle is turned on. The volume of the last drive is used. (codable in CIC)

Warning and menu sounds
BMW
Mini
BMW i
Rolls Royce
Depending on the manufacturer of the vehicle (BMW, Mini, BMW i or Rolls Royce) different sounds are used for warnings and menus. Use this feature to change the sounds to a different brand, for example from ‘BMW’ to ‘Rolly Royce’. (codable in NBT)

Audio source iPhone 1/2
on
on (alternative)
off
If an iPhone is connected via USB (either in the glove box or in the center console) it can be used as an audio source. (codable in NBT)

Audio source iPhone 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Brake lights
Brake force display
off
more lights
flashing brake signals
When braking hard (ABS needs to be triggered) the brake lights either flash or additional lights are turned on to signal the car behind that an emergency brake has been carried out. (codable in FEM)

Brake force display – minimum speed
5 kph / 3 mph
10 kph / 6 mph
30 kph / 19 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FEM)

Brake force display – lights
third brake light
turn signal lights
rear lights
Lights to be used for brake force display. (codable in FEM)

Brakes
Start engine without brake 1/2
on
off
To start engine without brake turn on ignition first and press ‘Start Stop’ long. Only change with ‘Start engine without brake 2/2’. (codable in FEM)

Start engine without brake 2/2
on
off
Only change with ‘Start engine without brake 1/2’. (codable in FEM)

Cleaning
Threshold washer fluid warning
low
medium
high
Threshold at which the washer fluid warning is turned on. The higher the threshold to activate this warning, the sooner this warning will be shown. (codable in FEM)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in FEM)

Number of wipes after rear window cleaning
off
1
2
3
4
Number of wipes after rear window is cleaned. (codable in FEM)

Wiping interval rear window
off
2s
4s
6s
8s
10s
12s
15s
Interval in seconds for windscreen rear window wipers. (codable in FEM)

Reduce wiper speed
off
130 kph / 80 mph
170 kph / 105 mph
210 kph / 130 mph
Threshold at which the wiper speed is reduced. (codable in FEM)

Rear window cleaning with low washer liquid
on
off
Rear windows are also cleaned even though the washer fluid level is low. (codable in FEM)

Wipe delay after windowscreen cleaning
0.1 s
0.3 s
0.5 s
0.7 s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in FEM)

Wipe delay after rear window cleaning
0.1 s
0.3 s
0.5 s
0.7 s
0.9 s
1.1 s
1.3 s
1.5 s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in FEM)

Wiping interval standstill
3s
5s
Interval in seconds for windscreen wipers at standstill. (codable in FEM)

Windscreen wipers continue
on
off
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in FEM)

Number until headlight cleaning
1
5
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in FEM)

Continue rear wiper when igntion turned on
on
off
Rear wiper continue wiping and don’t interrupt, when the ignition is turned on. (codable in FEM)

Rear wiper permanent when reversing
on
off
When rear wipers are active while reversing, they are automatically set to permament wiping. (codable in FEM)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in FEM)

Maximum speed headlight cleaning
6 kph / 4 mph
12 kph / 8 mph
30 kph / 19 mph
50 kph / 31 mph
80 kph / 50 mph
130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in FEM)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in FEM)

Length of splash for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in FEM)

Delay between splashes for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in FEM)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in FEM)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Comfort Functions
Start engine without brake 1/2
on
off
To start engine without brake turn on ignition first and press ‘Start Stop’ long. Only change with ‘Start engine without brake 2/2’. (codable in FEM)

Start engine without brake 2/2
on
off
Only change with ‘Start engine without brake 1/2’. (codable in FEM)

Start engine without clutch
on
off
To start engine without clutch turn on ignition first and press ‘Start Stop’ long. Please mind the selected gear at start. Only for manual transmission. (codable in FEM)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in FEM)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in FEM)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in FEM)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in FEM)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in FEM)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in FEM)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in FEM)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in FEM)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in FEM)

Door lock after driving away
on
off
Show menu in iDrive to activate door lock after driving away in vehicle settings ‘Doors/Key’. (codable in NBT)

Coming Home
Extend follow me home lights
on
off
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in FEM)
Daytime Running Lights
Daytime running lights – light switch
off
A or 0
A, 0 or 1
Low beams
High beams
Positions for the light switch where the daytime running lights function is activated. (codable in FEM)

Angel eyes brightn. left daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightn. right daytime run. light
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. This function controls the brightness of the right side. (codable in FEM)

Daytime running lights – outer tail l. left
on
off
Use left outer tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. outer tail l. left
very low
low
medium
high
very high
Brightness of outer left tail lights for daytime running lights. (codable in REM)

Daytime running lights – outer tail l. right
on
off
Use right outer tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. outer tail l. right
very low
low
medium
high
very high
Brightness of outer right tail lights for daytime running lights. (codable in REM)

Daytime running lights – inner tail l. left
on
off
Use left inner tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. inner tail l. left
very low
low
medium
high
very high
Brightness of inner left tail lights for daytime running lights. (codable in REM)

Daytime running lights – inner tail l. right
on
off
Use right inner tail lights as daytime running lights. (codable in REM)

Daytime r. l. – brightn. inner tail l. right
very low
low
medium
high
very high
Brightness of inner right tail lights for daytime running lights. (codable in REM)

Daytime running lights
display menu
permanently on
permanently off
Set mode of daytime running lights. Set to ‘display menu’ to display a menu in the iDrive settings for changing the mode of daytime running lights. (codable in CIC)

Display
Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Display ‘Diesel’ next to fuel level
on
off
Use this function to show the diesel sign next to fuel level indicator in the Kombi display. Not available in sports mode. (codable in KOMBI)

Display engine power
on
off
Use this function to show horsepowers in the instrument cluster below the rev counter. This display is only active in sports mode. (codable in KOMBI)

Display Layout Kombi
BMW AG
M GmbH
Alpina Tuning
Use this function to change the layout of your Kombi display. When select ‘Alpina’ please also enable ‘Display Layout Kombi – Alpina’ aktiviert werden. (codable in KOMBI)

Display Layout Kombi – Alpina
on
off
Only change this coding in combination with ‘Display Layout Kombi’ when ‘Alpina’ is selected. When coding is active for some models the fuel level may not be calculated correctly. This is because Alpina models normally have larger fuel tanks than 60 liters. Therefore, please check the fuel indicator after coding this function. (codable in KOMBI)

Logo KOMBI
no logo
edrive
M-Sport
m550i
m550d
m40d
m760i
m760il
B7 Biturbo
B7
B6 Biturbo
B6
B5 Biturbo
D5 Biturbo
XD3 Biturbo
m750ld
m750d
V12
Use this function so change the logo inside KOMBI display. Not available in M view. (codable in KOMBI)

ECO PRO layout change
on
off
Show menu in iDrive to activate/deactivate the layout change of the instrument cluster when changing to ECO Pro mode. (codable in NBT)

Instant fuel consumption
on
off
Activate an iDrive menu to show the instant fuel consumption display in the instrument cluster. (codable in NBT)

Drive mode warning
on
off
Show menu in iDrive to activate/deactivate the warning message after chaging the drive mode. (codable in NBT)

Speedometer Zoom
on
off
Show menu in iDrive to activate highlighting the current speed in the speedometer. (codable in NBT)

X View menu
on
off
Show ‘X View’ menu in the iDrive. In this menu you can check the current pitch and roll of your vehicle. This option is only available for vehicles with all-wheel-drive. (codable in NBT)

Automatic clock change 1/2
on
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 2/2’. (codable in NBT)

Bang Olufsen sound menu
on
on (alternative)
off
Show Bang and Olufsen menu in iDrive. Use this menu to access special Bang and Olufsen equalizer settings. Some functions depend on the installed speakers. (codable in NBT)

M-driving dynamics
on
off
Show menu in iDrive inside instrument cluster settings to activate M-driving dynamics. These menu options can only be used in M model cars. (codable in NBT)

Show KW/MW radio band
on
show MW menu
show KW menu
off
Use this function to enable or hide the MW and KW menus in the radio menu. (codable in NBT)

Automatic time setting 2/2
on
on (alternative)
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 1/2’. (codable in NBT)

Door lights
Turn on door lights in reverse gear
on
off
Turn on door lights while car is in reverse. This function can be used to illuminate the area while reversing in order to get a better view of the sides of the car. (codable in FEM)
Drive assistant
Blind spot detection – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Speed at which the blind spot detection is turned on. This function has only an effect if the car is equipped with a blind spot detection. (codable in ICM)
Drive dynamic
Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in CIC)
Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in FEM)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in FEM)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in FEM)

Easy entry – steering wheel 1/2
on
off
Also adjust the steering wheel position when easy entry is activated. (codable in FEM)

Easy entry – steering wheel 2/2
on
off
Only change this function with ‘Easy entry – steering wheel 1/2’. (codable in FEM)

Engine Start Stop
Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Start/Stop-Automatic memory
on
off
Setting for Start/Stop-Automatic is saved. This way the manual setting of the Start/Stop-Automatic button, i.e. whether the button is turned on or off, is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in FEM)

Start/Stop-Automatic default off
on
off
Engine start/stop automatic is turned off by default. (codable in FEM)

Start/Stop-Automatic enabled in ECO mode
on
off
Engine start/stop automatic is automatically activated in ECO mode. (codable in FEM)

Start in Eco / Eco Pro mode
on
off
When turning on the car, the ‘Eco / Eco Pro’ driving mode is automatically activated. Unfortunately, there is no possibility to automatically start the car in ‘Sport’ or ‘Sport+’ mode. (codable in ICM)

Gear Shift Indicator
Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in CIC)

Headlight Cleaning
Number until headlight cleaning
1
5
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in FEM)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in FEM)

Maximum speed headlight cleaning
6 kph / 4 mph
12 kph / 8 mph
30 kph / 19 mph
50 kph / 31 mph
80 kph / 50 mph
130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in FEM)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in FEM)

Length of splash for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in FEM)

Delay between splashes for head lights
0.4 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in FEM)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in FEM)

Head-Up Display
Cruise Control in Head-Up Display
on
off
Only change this function with ‘Cruise Control in Head-Up Display 1/2’. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Startscreen HUD
on
off
Show startscreen when HUD starts. (codable in KOMBI)

Entertainment menu in HUD
on
off
Show radio stations and track list in Head-Up Display. (codable in KOMBI)

Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Cruise Control in HUD – addition
on
off
Only change this function with ‘Cruise Control in Head-Up Display ‘. This function needs to be activated in additon. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Voice command in HUD
on
off
Display voice command confirmation information in Head-Up Display. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Cruise Control in Head-Up Display
on
off
Show cruise control in head-up display whenever cruise control is turned on. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the Kombi module. (codable in CIC)

Turn signals in Head-Up Display
on
off
Show menu in the iDrive to turn on signals and hazard lights in the head up display. To activate this function, please activate ‘Turn signals in Head-Up Display’ in the HUD/Kombi module. (codable in CIC)

Highway junction images on HUD
on
off
Show Highway junction images on HUD. (codable in CIC)

Entertainment/Telephone information in HUD
on
off
Adds checkbox in Head Up Display settings for entertainment/telephone in iDrive. To show information for entertainment and telephone, please also activate the HUD functions in the Kombi module. (codable in CIC)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in FEM)
iDrive logo
iDrive start logo
BMW Connected Drive (Version 1)
BMW Connected Drive (Version 2)
M Performance
Alpina Tuning
BMW i
BMW white
BMW brown
Mini
Rolls Royce
BMW Christmas
Logo that is displayed when starting the iDrive system. (codable in NBT)

iDrive start animated
not animated
animated
black screen
Logo that is displayed when starting the iDrive system is animated. Alternatively a black screen without any logo can be displayed. (codable in NBT)

iDrive Menus
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in CIC)

Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in CIC)

Tire pressure menu with temperature
on
off
Also show temperature of the individual tires in the tire pressure menu. This function only works if the tires have tire pressure sensors installed and pressure of the individual tires is already shown. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in CIC)

Message length while driving
no details
one page
up to five pages
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in CIC)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Volume popup
on
off
Show volume popup in the iDrive when changing the volume. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Sport mode configurable in iDrive
on
off
Sport mode can be configured in the iDrive menu. This function needs to be turned on in the iDrive module as well. The function will appear in the iDrive settings under drive mode settings. (codable in ICM)

Instrument Cluster
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Blank information display in dashboard
on
off
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)

Cruise Control speed display
off
3 s
5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)

Date in dashboard
on
off
Show date in dashboard. (codable in KOMBI)

GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Bootlogo for dashboard
BMW
M Performance
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Interior Lights
Welcome lights – Innenbeleuchtung
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights for welcome lights. (codable in FEM)

Interior lighting after unlocking
0s
10s
20s
30s
Interior lighting is turned on for a specific duration after the car is unlocked. (codable in FEM)

Interior lighting after locking
0s
8s
20s
30s
Interior lighting is turned on for a specific duration after the car is locked. (codable in FEM)

Interior lighting after opening trunk lid
on
off
Interior lighting is turned on, when trunk lid is opened. (codable in FEM)

Brightness interior lights after unlock
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights after unlocking the car. (codable in FEM)

Klimatization
Off-Mode Memory
on
off
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)

Save circulation settings
on
off
Circulation settings are saved for next start of the vehicle. (codable in IHKA)

Automatic compressor with air conditioning
on
off
When pressing the ‘Automatic’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic compressor with recirculation
on
off
When pressing the ‘Recirculation’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic reset to circulating air
on
off
Automatically reset to fresh air after a certain time when the recirculation mode of the A/C is active. (codable in IHKA)

Legal Disclaimer
Legal disclaimer (US)
off
on
permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CIC)

Camera disclaimer
off
on
permanent
Show legal disclaimer for rear view camera. (codable in CIC)

Night Vision disclaimer
off
on
permanent
Show legal disclaimer for night vision view camera. (codable in CIC)

Locking
Optical confirmation – locking vehicle
off
1
2
3
Number of times the turn signals are turned on when locking the vehicle. (codable in FEM)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in FEM)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in FEM)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in FEM)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in FEM)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in FEM)

Automatically lock vehicle duration
30s
1 min
2 min
5 min
If no door or window has been opened after the car has been unlocked, the doors automatically lock. Use this function to set the duration after which the car is automatically locked. (codable in FEM)

Threshold speed for vehicle locking
2 kph / 1 mph
4 kph / 2 mph
8 kph / 5 mph
16 kph / 10 mph
24 kph / 15 mph
32 kph / 20 mph
Sets the speed at which the vehicle automatically locks all doors. (codable in FEM)

Unlock car when turned off
on
off
Doors are automatically unlocked, when engine is turned off. Only works if the doors were automatically locked by the car while driving. (codable in FEM)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FZD)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in FZD)

Mirrors
Comfort folding for sideview mirrors
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in FEM)

Auto-Unfold mirrors
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
40 kph / 25 mph
Speed at which folded mirrors are automatically unfolded. (codable in FEM)

Mirror tilt 1/2
on
off
Requirement for mirror tilt functions. (codable in FEM)

Mirror tilt 2/2
on
off
Requirement for mirror tilt functions. (codable in FEM)

Tilt mirror in reverse
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in FEM)

Mirror tilt while reversing
weak
medium
strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in FEM)

Maximum speed mirror fold
10 kph / 6 mph
20 kph / 12 mph
40 kph / 25 mph
60 kph / 37 mph
Maximum speed at which folding the mirrors is possible. (codable in FEM)

Unfold mirrors after comfort close
on
off
Mirrors are automatically unfolded when the car is unlocked, if they were folded by the comfort closing function. (codable in FEM)

Mirror fold with hazard lights
on
off
Mirrors can be folded via comfort closing while hazard lights are active. (codable in FEM)

Navigation
Navigation fuel stop suggestion
on
off
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in CIC)

Route Info
on
off
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in CIC)

Navigation geo coordinates
on
off
Show geo coordinates in latitude and longitude in the navigation menu. (codable in CIC)

Navigation while updating
on
off
Allow using the navigation system while the maps are being updated. (codable in CIC)

Arrow view in main window
on
off
Arrow view is also available in the main window and not only in the split screen window. (codable in CIC)

Navigation current position
on
off
Show option to display current position in the navigation menu. (codable in CIC)

Range map
on
off
Range map is available in the main window as a possible map. (codable in NBT)

Route magnet
on
off
Display route magnet as a possible method for recalculating the active route. (codable in NBT)

Route preview
on
off
Display the route preview menu. This function is also known as ‘Route simulator’. If available, also activate ‘Route preview – addition’. (codable in NBT)

Route preview – addition
on
off
Only change this function with ‘Route preview’. (codable in NBT)

Opening
Optical confirmation – unlocking vehicle
off
1
2
3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in FEM)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in FEM)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in FEM)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in FEM)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in FEM)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in FEM)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in FEM)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in FEM)

Trunk open confirmation with Comfort Access
on
off
Rear turn lights flash when opening the trunk/tail gate with comfort access. (codable in FEM)

Trunk open delay with comfort access
0.0s
0.3s
0.5s
0.7s
1s
When the trunk/tail gate is openend with comfort access, the car delays the opening because of the visual confirmation. Use this function to turn the delay off, so the trunk/tail gate immediately opens. (codable in FEM)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FZD)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in FZD)

Park Distance Control (PDC)
PDC in reverse
on
off
Activate PDC as soon as car is rolling backwards/reversing. (codable in REM)

PDC turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
25 m / 82 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in REM)

PDC turn off – speed limit
when putting in forward gear
1 kph / 1 mph
15 kph / 9 mph
36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in REM)

Reversing camera turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
25 m / 82 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in REM)

Reversing camera turn off – speed limit
when putting in forward gear
1 kph / 1 mph
15 kph / 9 mph
36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in REM)

PDC view
vertical (F-Models)
horizontal (E-Models)
Direction of park distance control view. (codable in CIC)

Warning sound volume front
very weak
weak
medium
strong
very strong
Volume for the warning sound of the front PDC. (codable in PDC)

Warning sound volume rear
very weak
weak
medium
strong
very strong
Volume for the warning sound of the rear PDC. (codable in PDC)

Parking Light
Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the left side. (codable in FEM)

Angel eyes brightness standing lights
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. This function controls the brightness of the right side. (codable in FEM)

Fog lights with standing lights
on
off
Fog lights can be turned on when the light switch is in the standing lights position. (codable in FEM)

Parking lights
on
off
Parking lights function is active/not active. One sided parking lights are activated by turning on the turn signals after turning off the ignition and locking the car. (codable in FEM)

Power Windows
Continue window action when door is opened
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in FEM)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in FEM)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in FEM)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in FEM)

Rain Light Sensor
Rain light sensor sensitivity
very sensitive
sensitive
normal
insensitive
daytime running lights
Sensitivity of rain light sensor. (codable in FEM)
Rear lights / tail lights
Rear fog lights
on
off
Activate rear fog light function. To activate this function, please also activate the rear fog lights in the REM module. (codable in FEM)

Rear fog light left – 1/2
on
off
Activate left rear fog light. To activate this function, please also activate the rear fog lights in the FEM module. (codable in REM)

Rear fog light left – 2/2
on
off
Only change this function with ‘Rear fog light left – 1/2’. (codable in REM)

Rear fog light right – 1/2
on
off
Activate right rear fog light. To activate this function, please also activate the rear fog lights in the FEM module. (codable in REM)

Rear fog light right – 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in REM)

Seat
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Easy entry/exit aid
off
driver
passenger
When entering/leaving the car the seat is widened (with the lumbar width adjustment) so entering/leaving the car is easier. (codable in SM_FA)

Seat position memory confirmation
on
off
When saving the seat position with the memory buttons in the car, a short Gong sound is played. (codable in SM_FA)

Seating Heater
Seat heater temp. level 1 – armrest front
29°C / 84°F
32°C / 90°F
35°C / 95°F
38°C / 100°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – armrest front
38°C / 100°F
41°C / 106°F
44°C / 111°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – armrest front
44°C / 111°F
47°C / 117°F
50°C / 122°F
53°C / 127°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in FEM)

Seat heater temp. level 1 – seat front
28°C / 82°F
31°C / 88°F
34°C / 93°F
37°C / 99°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – seat front
37°C / 99°F
40°C / 104°F
43°C / 109°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – seat front
43°C / 109°F
46°C / 115°F
49°C / 120°F
52°C / 126°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in FEM)

Seat heater temp. level 1 – armrest rear
29°C / 84°F
32°C / 90°F
35°C / 95°F
38°C / 100°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – armrest rear
38°C / 100°F
41°C / 106°F
44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – armrest rear
44°C / 111°F
47°C / 117°F
50°C / 122°F
53°C / 127°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in FEM)

Seat heater temp. level 1 – seat rear
28°C / 82°F
31°C / 88°F
34°C / 93°F
37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in FEM)

Seat heater temp. level 2 – seat rear
37°C / 99°F
40°C / 104°F
43°C / 109°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in FEM)

Seat heater temp. level 3 – seat rear
43°C / 109°F
46°C / 115°F
49°C / 120°F
52°C / 126°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in FEM)

Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Sidemarker
US Sidemarker left
on
off
off (alternative)
Light for the US Sidemarker on the left side. If switch setting is ‘0’, the function does not have an effect. If switch setting is ‘A’, the function does only have an effect if it’s dark. In addition the brightness has to be set to ‘High’. (codable in FEM)

US Sidemarker left brightness
off
very low
low
medium
high
very high
Brightness of the US Sidemarker on the left side. (codable in FEM)

US Sidemarker right
on
off
off (alternative)
Light for the US Sidemarker on the right side. If switch setting is ‘0’, the function does not have an effect. If switch setting is ‘A’, the function does only have an effect if it’s dark. In addtion the brightness has to be set to ‘High’. (codable in FEM)

US Sidemarker right brightness
off
very low
low
medium
high
very high
Brightness of the US Sidemarker on the right side. (codable in FEM)

Speedometer
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Spoiler
Raising speed for spoiler
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Vehicle speed in kph or mph at which spoiler automatically raises. Raising speed has to be higher than the lowering speed. The lowering speed can be changed with ‘lowering speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Lowering speed for spoiler 2/2
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Only change this function with ‘Lowering speed for spoiler 1/2’. (codable in HKL2)

Lowering speed spoiler 1/2
50 kph / 31 mph
70 kph / 45 mph
90 kph/ 55 mph
Vehicle speed in kph or mph at which spoiler automatically lowers. Lowering speed has to be lower than the raising speed. The raising speed can be changed with ‘Raising speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Sport display
Sport display – unit for performance
hp
kW
Unit for performance in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display – unit for torque
Nm
lb ft
kgm
Unit for torque in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tail gate/Rear lid
Trunk open confirmation with Comfort Access
on
off
Rear turn lights flash when opening the trunk/tail gate with comfort access. (codable in FEM)

Trunk open delay with comfort access
0.0s
0.3s
0.5s
0.7s
1s
When the trunk/tail gate is openend with comfort access, the car delays the opening because of the visual confirmation. Use this function to turn the delay off, so the trunk/tail gate immediately opens. (codable in FEM)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Close trunk with keyfob
on
off
Close the trunk/rear lid via the keyfob. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Close trunk with footwell switch
on
off
Close the trunk/rear lid with the interior footwell switch. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Close trunk with keyfob – addition
on
off
Only change this function with ‘Close trunk with keyfob’. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Tank
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Telephone
Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Selection of ringtone
BMW
Mini
Selection of the ringtone which sounds when a call comes in. To use the ringtone of your phone, please turn ‘Use telephone ringtone’ on. (codable in CIC)

Use telephone ringtone
on
off
Playback of the telephone ringtone on the car speakers. (codable in CIC)

Message length while driving
no details
one page
up to five pages
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Siri Eyes-Free button
on
off
When pressing and holding the voice command button on the steering wheel ‘Siri Eyes-Free’ is activated. This function can only be used by iOS devices. Siri has to be active on the iPhone. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Number of addresses/messages for storing
1
5
10
20
25
30
40
50
Maximum number of messages/addresses to be stored in the car. (codable in COMBOX)

Tire Pressure Monitoring
Tyre pressure monitoring system
on
off
Use this function to turn off the tyre pressure monitoring system (TPMS). This coding can’t be used to retrofit TPMS to a car. (codable in KOMBI)
Tires
Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Turn signals
Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

One-touch turn signal function
1
3
5
7
Number of turn signals when tapping the turn signal. In some cases, this option also needs to be enabled in the iDrive. (codable in FEM)

Optical confirmation – unlocking vehicle
off
1
2
3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in FEM)

Optical confirmation – locking vehicle
off
1
2
3
Number of times the turn signals are turned on when locking the vehicle. (codable in FEM)

Turn signals in Head-Up Display
on
off
Show menu in the iDrive to turn on signals and hazard lights in the head up display. To activate this function, please activate ‘Turn signals in Head-Up Display’ in the HUD/Kombi module. (codable in CIC)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FZD)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FZD)

Alarm with turn signals
on
off
Turn signals blink when alarm is initiated. (codable in FZD)

Video in Motion
Video in motion 1/3
off
3 kph / 2 mph
8 kph / 5 mph
on
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in CIC)

Video in motion 2/3
off
3 kph / 2 mph
10 kph / 6 mph
on
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion 3/3
on
off
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion menu
on
off
Enable menu to activate video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. To deactivate video in motion, please deactivate and activate this coding again and follow the steps afterwards. (codable in NBT)

Video only with handbrake
on
off
Only allow watching video while the handbrake is pulled. In order to watch video while driving, set this function to ‘not active’ and activate all parts of ‘Video in motion’. Video in motion is only possible if the car supports watching TV or playing DVDs while standing. If available, also deactivate ‘Video only with handbrake – addition’. (codable in NBT)

Video format support 1/3
on
off
Enable playback of videos in more video formats. (codable in NBT)

Video format support 2/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

Video format support 3/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

DVD menu button during playing
DVD menu button
title list button
When playing a DVD instead of the ‘Title list’ button a button is shown to activate the own menu of the DVD, like on a DVD player. (codable in NBT)

Video Playback via USB
on
off
off (alternative)
Play videos on a USB-Stick. (codable in NBT)

Video Playback from iPhone
on
off
off (alternative)
Play videos from iPhone. This only works if the iPhone is connected via a snap-in adapter. This does not work if the iPhone is connected via a USB cable. (codable in NBT)

Video only with handbrake – addition
off
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Only change this function with ‘Video only with handbrake’. (codable in NBT)

Voltage Monitoring
Low beams left voltage monit. 1/2
on
off
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in FEM)

Low beams left voltage monit. 2/2
on
off
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Low beams right voltage monit. 1/2
on
off
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in FEM)

Low beams right voltage monit. 2/2
on
off
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

High beams left voltage monit. 1/2
on
off
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in FEM)

High beams left voltage monit. 2/2
on
off
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

High beams right voltage monit. 1/2
on
off
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in FEM)

High beams right voltage monit. 2/2
on
off
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Turn signals front left voltage monit. 1/2
on
off
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in FEM)

Turn signals front left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Turn signals front right voltage monit. 1/2
on
off
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in FEM)

Turn signals front right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Front fog lights left voltage monit. 1/2
on
off
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in FEM)

Front fog lights left voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Front fog lights right voltage monit. 1/2
on
off
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in FEM)

Front fog lights right voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Daytime running lights left voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights left. Might cause flickering of LED lights. (codable in FEM)

Daytime running lights left voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Daytime running lights right voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights right. Might cause flickering of LED lights. (codable in FEM)

Daytime running lights right voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in FEM)

Turn signals front left warning
on
off
Warning for malfunction of Turn signals front left in the on board computer. (codable in FEM)

Turn signals front right warning
on
off
Warning for malfunction of Turn signals front right in the on board computer. (codable in FEM)

Turn signals rear left voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in REM)

Turn signals rear left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Turn signals rear right voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in REM)

Turn signals rear right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Standing lights outer rear left voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear right voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear left voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear right voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Reversing lights left voltage monit. 1/2
on
off
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in REM)

Reversing lights left voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Reversing lights right voltage monit. 1/2
on
off
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in REM)

Reversing lights right voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Rear fog light left voltage monit. 1/2
on
off
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in REM)

Rear fog light left voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Rear fog light right voltage monit. 1/2
on
off
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in REM)

Rear fog light right voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Brake lights left voltage monit. 1/2
on
off
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in REM)

Brake lights left voltage monit. 2/2
on
off
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Brake lights right voltage monit. 1/2
on
off
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in REM)

Brake lights right voltage monit. 2/2
on
off
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Third brake light voltage monit. 1/2
on
off
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in REM)

Third brake light voltage monit. 2/2
on
off
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in REM)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in REM)

Warnings
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Temperature warning
on
off
Warning for outside temperature below 4° C / 39° F is active/not active. (codable in KOMBI)

Reverse gear gong
on
off
Gong for reverse gear is active/not active. (codable in KOMBI)

Low beams left warning
off
on
on (alternative)
Warning for malfunction of Low beams left in the on board computer. (codable in FEM)

Low beams right warning
off
on
on (alternative)
Warning for malfunction of Low beams right in the on board computer. (codable in FEM)

High beams left warning
on
off
Warning for malfunction of High beams left in the on board computer. (codable in FEM)

High beams right warning
on
off
Warning for malfunction of High beams right in the on board computer. (codable in FEM)

Front fog lights left warning
off
on
on (alternative)
Warning for malfunction of Front fog lights left in the on board computer. (codable in FEM)

Front fog lights right warning
on
off
Warning for malfunction of Front fog lights right in the on board computer. (codable in FEM)

Daytime running lights left warning
off
on
on (alternative)
Warning for malfunction of Daytime running lights left in the on board computer. (codable in FEM)

Daytime running lights right warning
off
on
on (alternative)
on (Japan)
Warning for malfunction of Daytime running lights right in the on board computer. (codable in FEM)

Turn signals rear left warning
on
off
Warning for malfunction of Turn signals rear left in the on board computer. (codable in REM)

Turn signals rear right warning
on
off
Warning for malfunction of Turn signals rear right in the on board computer. (codable in REM)

Standing lights outer rear left warning
on
off
Warning for malfunction of outer rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights outer rear right warning
on
off
Warning for malfunction of outer rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear left warning
on
off
Warning for malfunction of inner rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Standing lights inner rear right warning
on
off
Warning for malfunction of inner rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Reversing lights left warning
on
off
Warning for malfunction of left reversing lights in the on board computer. (codable in REM)

Reversing lights right warning
on
on (alternative)
off
Warning for malfunction of right reversing lights in the on board computer. (codable in REM)

Rear fog light left warning
on
on (alternative)
off
Warning for malfunction of rear left fog light in the on board computer. (codable in REM)

Rear fog light right warning
on
on (alternative)
off
Warning for malfunction of rear right fog light in the on board computer. (codable in REM)

Brake lights left warning
on
off
Warning for malfunction of left braking lights in the on board computer. (codable in REM)

Brake lights right warning
on
off
Warning for malfunction of right braking lights in the on board computer. (codable in REM)

Third brake light warning
on
off
Warning for malfunction of third brake light in the on board computer. (codable in REM)

License plate light warning
on
off
Warning for malfunction of license plate lights in the on board computer. (codable in REM)

Seat belt reminder driver
on
off
Seat belt reminder for driver is active/ inactive. (codable in CSM)

Seat belt reminder passenger
on
off
Seat belt reminder for passenger is active/ inactive. (codable in CSM)

Seat belt reminder – distance
100 m / 330 ft
200 m / 660 ft
500 m / 0.31 mls
1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in CSM)

Seat belt reminder – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in CSM)

Seat belt reminder – duration
5s
10s
30s
60s
90s
100s
120s
Duration of seat belt reminder warnings. (codable in CSM)

Seat belt reminder – driver unbuckled
on
off
When the driver unbuckles his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt reminder – passenger unbuckled
on
off
When the passenger unbuckles his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt reminder – ignition on
on
off
When the ignition is turned on and the driver has not put on his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt status display driver
on
off
Display of the seat belt status for the driver (buckled/unbuckled) in the dashboard. (codable in CSM)

Seat belt status display passenger
on
off
Display of the seat belt status for the passenger (buckled/unbuckled) in the dashboard. (codable in CSM)

Seat belt status display rear seats
on
off
Display of the seat belt status for the rear seats (buckled/unbuckled) in the dashboard. (codable in CSM)

Welcome Light
Welcome lights
on
off
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in FEM)

Welcome-lights – light switch position
off
A
A or 2
Positions for the light switch where the welcome-lights function is activated. (codable in FEM)

Welcome lights – brightness
off
very low
low
medium
high
very high
Brightness of exterior lights for welcome lights. (codable in FEM)

Welcome lights duration
10s
20s
40s
90s
150s
240s
Duration of the welcome lights in seconds. (codable in FEM)

Welcome lights – standing lights front left
off
turn on softly
turn on hard
Standing lights front left are turned on with welcome lights. (codable in FEM)

Welcome lights – standing lights front right
off
turn on softly
turn on hard
Standing lights front right are turned on with welcome lights. (codable in FEM)

Welcome lights – DRL left
off
turn on softly
turn on hard
Daytime running lights left are turned on with welcome lights. (codable in FEM)

Welcome lights – DRL right
off
turn on softly
turn on hard
Daytime running lights right are turned on with welcome lights. (codable in FEM)

Welcome lights – low beams left
off
turn on softly
turn on hard
Low beams left are turned on with welcome lights. (codable in FEM)

Welcome lights – low beams right
off
turn on softly
turn on hard
Low beams right are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal front left
off
turn on softly
turn on hard
Turn signal front left are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal front right
off
turn on softly
turn on hard
Turn signal front right are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal mid left
off
turn on softly
turn on hard
Turn signal mid (mirrors) left are turned on with welcome lights. (codable in FEM)

Welcome lights – turn signal mid right
off
turn on softly
turn on hard
Turn signal mid (mirrors) right are turned on with welcome lights. (codable in FEM)

Welcome lights – design lights left
off
turn on softly
turn on hard
Design lights left are turned on with welcome lights. (codable in FEM)

Welcome lights – design lights right
off
turn on softly
turn on hard
Design lights right are turned on with welcome lights. (codable in FEM)

Welcome lights – high beams left
off
turn on softly
turn on hard
High beams left are turned on with welcome lights. (codable in FEM)

Welcome lights – high beams right
off
turn on softly
turn on hard
High beams right are turned on with welcome lights. (codable in FEM)

Welcome lights – front fog lights left
off
turn on softly
turn on hard
Front fog lights left are turned on with welcome lights. (codable in FEM)

Welcome lights – front fog lights right
off
turn on softly
turn on hard
Front fog lights right are turned on with welcome lights. (codable in FEM)

Welcome lights – Innenbeleuchtung
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights for welcome lights. (codable in FEM)

Brightness interior lights after unlock
off
very low
low
rather low
medium
rather high
high
very high
Brightness of interior lights after unlocking the car. (codable in FEM)

Welcome lights – only when dark
on
off
Welcome lights are only turned on when the rain-light sensor (RLS) recognizes it is dark outside. Only works if rain-light sensor is installed. (codable in FEM)

Welcome lights – turn signals rear left
off
turn on softly
turn on hard
Turn signals rear left are turned on with welcome lights. (codable in REM)

Welcome lights – turn signals rear right
off
turn on softly
turn on hard
Turn signals rear right are turned on with welcome lights. (codable in REM)

Welcome lights – stand. lights outer rear left
off
turn on softly
turn on hard
Outer standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – stand. lights outer rear right
off
turn on softly
turn on hard
Outer standing lights rear right are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – stand. lights inner rear left
off
turn on softly
turn on hard
Inner standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – stand. lights inner rear right
off
turn on softly
turn on hard
Inner standing lights rear right are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in REM)

Welcome lights – reversing lights left
off
turn on softly
turn on hard
Reversing lights left are turned on with welcome lights. (codable in REM)

Welcome lights – reversing lights right
off
turn on softly
turn on hard
Reversing lights right are turned on with welcome lights. (codable in REM)

Welcome lights – rear fog lights left
off
turn on softly
turn on hard
Rear left fog lights are turned on with welcome lights. (codable in REM)

Welcome lights – rear fog lights right
off
turn on softly
turn on hard
Rear right fog lights are turned on with welcome lights. (codable in REM)

Welcome lights – braking lights left
off
turn on softly
turn on hard
Braking lights left are turned on with welcome lights. (codable in REM)

Welcome lights – braking lights right
off
turn on softly
turn on hard
Braking lights right are turned on with welcome lights. (codable in REM)

Welcome lights – third brake light
off
turn on softly
turn on hard
Third brake light is turned on with welcome lights. (codable in REM)

Welcome lights – number plate lighting
off
turn on softly
turn on hard
Number plate lights are turned on with welcome lights. (codable in REM)

Active Sound Design
Active Sound Design Mode
off
M5/M6
Mode for Active Sound Design. The Active Sound Design module produces an amplified exhaust sound in the interior through the speakers. If you disable this function a fault code in the ASD might appear. To remove this fault code restore the ASD from ist original backup, since the fault code appeared because the ASD has been disabled. (codable in ASD)

Active Sound Design Volume
very quiet
quiet
medium
loud
very loud
Volume for active sound design. (codable in ASD)

Alarm System
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in CIC)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Audible confirmation at night
on
off
Between 8:00 PM and 8:00 AM the volume of the sound for the audible confirmation for locking/unlocking the vehicle is automatically turned lower. (codable in FZD)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Alarm type
Europe
USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in FZD)

Audible confirmation – length
very short
short
medium
long
very long
Length of audible confirmation chirp. (codable in FZD)

Audible confirmation – pitch
very low
low
medium
high
very high
Pitch for audible confirmation. (codable in FZD)

Audible confirmation – min. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Minimum volume for the audible confirmation chirp. (codable in FZD)

Audible confirmation – max. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Maximum volume for the audible confirmation chirp. (codable in FZD)

Alarm with sound
on
off
Use this function to turn the alarm sound completely off. When an alarm is triggered only the lights will flash. This also disables the audible confirmation when locking the vehicle. (codable in FZD)

Alarm at night
on
off
Between 8:00 PM and 8:00 AM the alarm is automatically turned off. In this time the audible confirmation for locking/unlocking the vehicle is also turned off. (codable in FZD)

Alarm with turn signals
on
off
Turn signals blink when alarm is initiated. (codable in FZD)

Alarm with dimmed headlights
on
off
Dimmed headlights blink when alarm is initiated. (codable in FZD)

Alarm with high beams
on
off
High beams blink when alarm is initiated. (codable in FZD)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in FZD)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in FZD)

Ambient lighting
Ambient lighting brightness 1/2
same brightness as speedometer
own brightness
Usually the brightness of the ambient lighting is automatically adjusted to the brightness of the speedometer illumination. To set the brightness indepently from the speedometer illumination, set this function to ‘own brightness’. The brightness of the ambient lighting can then be changed with ‘Ambient lighting brightness 2/2’. (codable in BDC)

Ambient lighting brightness 2/2
very low
low
rather low
medium
rather high
high
very high
Own brightness for ambient lighting. In order to activate this function, set ‘Ambient lighting brightness’ to ‘own brightness’. (codable in BDC)

Individual ambient light
on
off
Show menu in iDrive to individualize ambient light. Functions depend on the installed lights. (codable in NBT)

Audio
iDrive off when open door
on
off
Radio and Navigation turn off when the driver door is opened. This function doesn’t have an effect while engine is running. (codable in BDC)

Maximum volume when ignition on
quiet
medium
loud
Maximum volume for radio/music when the vehicle is turned on. The volume of the last drive is used. (codable in CIC)

Warning and menu sounds
BMW
Mini
BMW i
Rolls Royce
Depending on the manufacturer of the vehicle (BMW, Mini, BMW i or Rolls Royce) different sounds are used for warnings and menus. Use this feature to change the sounds to a different brand, for example from ‘BMW’ to ‘Rolly Royce’. (codable in NBT)

Audio source iPhone 1/2
on
on (alternative)
off
If an iPhone is connected via USB (either in the glove box or in the center console) it can be used as an audio source. (codable in NBT)

Audio source iPhone 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Brake lights
Brake force display
off
more lights
flashing brake signals
When braking hard (ABS needs to be triggered) the brake lights either flash or additional lights are turned on to signal the car behind that an emergency brake has been carried out. (codable in BDC)

Brake force display – lights
rear turn signals
brake lights
third braking light
Lights to be used for brake force display. (codable in BDC)

Brake force display – minimum speed
5 kph / 3 mph
10 kph / 6 mph
30 kph / 19 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in BDC)

Brakes
Start engine without brake 1/2
on
off
To start engine without brake turn on ignition first and press ‘Start Stop’ long. Only change with ‘Start engine without brake 2/2’. (codable in BDC)

Start engine without brake 2/2
on
off
Only change with ‘Start engine without brake 1/2’. (codable in BDC)

Cleaning
Threshold washer fluid warning
low
medium
high
Threshold at which the washer fluid warning is turned on. The higher the threshold to activate this warning, the sooner this warning will be shown. (codable in BDC)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in BDC)

Number of wipes after rear window cleaning
off
1
2
3
4
Number of wipes after rear window is cleaned. (codable in BDC)

Wiping interval rear window
off
2s
4s
6s
8s
10s
12s
15s
Interval in seconds for windscreen rear window wipers. (codable in BDC)

Reduce wiper speed
off
130 kph / 80 mph
170 kph / 105 mph
210 kph / 130 mph
Threshold at which the wiper speed is reduced. (codable in BDC)

Rear window cleaning with low washer liquid
on
off
Rear windows are also cleaned even though the washer fluid level is low. (codable in BDC)

Wipe delay after windowscreen cleaning
0.1 s
0.3 s
0.5 s
0.7 s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in BDC)

Wipe delay after rear window cleaning
0.1 s
0.3 s
0.5 s
0.7 s
0.9 s
1.1 s
1.3 s
1.5 s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in BDC)

Wiping interval standstill
3s
5s
Interval in seconds for windscreen wipers at standstill. (codable in BDC)

Windscreen wipers continue
on
off
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in BDC)

Number until headlight cleaning
1
5
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in BDC)

Continue rear wiper when igntion turned on
on
off
Rear wiper continue wiping and don’t interrupt, when the ignition is turned on. (codable in BDC)

Rear wiper permanent when reversing
on
off
When rear wipers are active while reversing, they are automatically set to permament wiping. (codable in BDC)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in BDC)

Maximum speed headlight cleaning
6 kph / 4 mph
12 kph / 8 mph
30 kph / 19 mph
50 kph / 31 mph
80 kph / 50 mph
130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in BDC)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in BDC)

Length of splash for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in BDC)

Delay between splashes for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in BDC)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in BDC)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Comfort Functions
Start engine without brake 1/2
on
off
To start engine without brake turn on ignition first and press ‘Start Stop’ long. Only change with ‘Start engine without brake 2/2’. (codable in BDC)

Start engine without brake 2/2
on
off
Only change with ‘Start engine without brake 1/2’. (codable in BDC)

Start engine without clutch
on
off
To start engine without clutch turn on ignition first and press ‘Start Stop’ long. Please mind the selected gear at start. Only for manual transmission. (codable in BDC)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in BDC)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in BDC)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in BDC)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in BDC)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in BDC)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in BDC)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in BDC)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in BDC)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in BDC)

Door lock after driving away
on
off
Show menu in iDrive to activate door lock after driving away in vehicle settings ‘Doors/Key’. (codable in NBT)

Coming Home
Extend follow me home lights
on
off
Follow me home lights are displayed longer, when activating the flash to pass again. (codable in BDC)
Daytime Running Lights
Daytime running lights – light switch
off
A or 0
A, 0 or 1
Positions for the light switch where the daytime running lights function is activated. (codable in BDC)

Daytime running lights
display menu
permanently on
permanently off
Set mode of daytime running lights. Set to ‘display menu’ to display a menu in the iDrive settings for changing the mode of daytime running lights. (codable in CIC)

Display
Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Display ‘Diesel’ next to fuel level
on
off
Use this function to show the diesel sign next to fuel level indicator in the Kombi display. Not available in sports mode. (codable in KOMBI)

Display engine power
on
off
Use this function to show horsepowers in the instrument cluster below the rev counter. This display is only active in sports mode. (codable in KOMBI)

Display Layout Kombi
BMW AG
M GmbH
Alpina Tuning
Use this function to change the layout of your Kombi display. When select ‘Alpina’ please also enable ‘Display Layout Kombi – Alpina’ aktiviert werden. (codable in KOMBI)

Display Layout Kombi – Alpina
on
off
Only change this coding in combination with ‘Display Layout Kombi’ when ‘Alpina’ is selected. When coding is active for some models the fuel level may not be calculated correctly. This is because Alpina models normally have larger fuel tanks than 60 liters. Therefore, please check the fuel indicator after coding this function. (codable in KOMBI)

Logo KOMBI
no logo
edrive
M-Sport
m550i
m550d
m40d
m760i
m760il
B7 Biturbo
B7
B6 Biturbo
B6
B5 Biturbo
D5 Biturbo
XD3 Biturbo
m750ld
m750d
V12
Use this function so change the logo inside KOMBI display. Not available in M view. (codable in KOMBI)

ECO PRO layout change
on
off
Show menu in iDrive to activate/deactivate the layout change of the instrument cluster when changing to ECO Pro mode. (codable in NBT)

Instant fuel consumption
on
off
Activate an iDrive menu to show the instant fuel consumption display in the instrument cluster. (codable in NBT)

Drive mode warning
on
off
Show menu in iDrive to activate/deactivate the warning message after chaging the drive mode. (codable in NBT)

Speedometer Zoom
on
off
Show menu in iDrive to activate highlighting the current speed in the speedometer. (codable in NBT)

X View menu
on
off
Show ‘X View’ menu in the iDrive. In this menu you can check the current pitch and roll of your vehicle. This option is only available for vehicles with all-wheel-drive. (codable in NBT)

Automatic clock change 1/2
on
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 2/2’. (codable in NBT)

Bang Olufsen sound menu
on
on (alternative)
off
Show Bang and Olufsen menu in iDrive. Use this menu to access special Bang and Olufsen equalizer settings. Some functions depend on the installed speakers. (codable in NBT)

M-driving dynamics
on
off
Show menu in iDrive inside instrument cluster settings to activate M-driving dynamics. These menu options can only be used in M model cars. (codable in NBT)

Show KW/MW radio band
on
show MW menu
show KW menu
off
Use this function to enable or hide the MW and KW menus in the radio menu. (codable in NBT)

Automatic time setting 2/2
on
on (alternative)
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 1/2’. (codable in NBT)

Door lights
Turn on door lights in reverse gear
on
off
Turn on door lights while car is in reverse. This function can be used to illuminate the area while reversing in order to get a better view of the sides of the car. (codable in BDC)
Drive assistant
Blind spot detection – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Speed at which the blind spot detection is turned on. This function has only an effect if the car is equipped with a blind spot detection. (codable in ICM)
Drive dynamic
Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in CIC)
Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in BDC)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in BDC)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in BDC)

Engine Start Stop
Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Start/Stop-Automatic memory
on
off
Setting for Start/Stop-Automatic is saved. This way the manual setting of the Start/Stop-Automatic button, i.e. whether the button is turned on or off, is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in BDC)

Start/Stop-Automatic default off
on
off
Engine start/stop automatic is turned off by default. (codable in BDC)

Start/Stop-Automatic enabled in ECO mode
on
off
Engine start/stop automatic is automatically activated in ECO mode. (codable in BDC)

Start in Eco / Eco Pro mode
on
off
When turning on the car, the ‘Eco / Eco Pro’ driving mode is automatically activated. Unfortunately, there is no possibility to automatically start the car in ‘Sport’ or ‘Sport+’ mode. (codable in ICM)

Default User Mode
Sport Dynamic
Sport Expert
Sport Individual
Comfort
Comfort Plus
Comfort Individual
Eco Pro Efficient
Eco Pro Plus
Eco Pro Individual
PHEV Sport Individual
PHEV Hybrid Standard
PHEV Electric Standard
PHEV Electric Individual
Adaptive
PHEV Sport Standard
Use this coding to select the driving mode at engine start. If the selected mode is not available default value is delected automatically. (codable in GBDCMAIN)

Gear Shift Indicator
Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in CIC)

Headlight Cleaning
Number until headlight cleaning
1
5
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in BDC)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in BDC)

Maximum speed headlight cleaning
6 kph / 4 mph
12 kph / 8 mph
30 kph / 19 mph
50 kph / 31 mph
80 kph / 50 mph
130 kph / 80 mph
Maximum speed at which folding headlight cleaning is possible. (codable in BDC)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in BDC)

Length of splash for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in BDC)

Delay between splashes for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in BDC)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in BDC)

Head-Up Display
Cruise Control in Head-Up Display
on
off
Only change this function with ‘Cruise Control in Head-Up Display 1/2’. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Startscreen HUD
on
off
Show startscreen when HUD starts. (codable in KOMBI)

Entertainment menu in HUD
on
off
Show radio stations and track list in Head-Up Display. (codable in KOMBI)

Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Cruise Control in HUD – addition
on
off
Only change this function with ‘Cruise Control in Head-Up Display ‘. This function needs to be activated in additon. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Voice command in HUD
on
off
Display voice command confirmation information in Head-Up Display. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Cruise Control in Head-Up Display
on
off
Show cruise control in head-up display whenever cruise control is turned on. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the Kombi module. (codable in CIC)

Turn signals in Head-Up Display
on
off
Show menu in the iDrive to turn on signals and hazard lights in the head up display. To activate this function, please activate ‘Turn signals in Head-Up Display’ in the HUD/Kombi module. (codable in CIC)

Highway junction images on HUD
on
off
Show Highway junction images on HUD. (codable in CIC)

Entertainment/Telephone information in HUD
on
off
Adds checkbox in Head Up Display settings for entertainment/telephone in iDrive. To show information for entertainment and telephone, please also activate the HUD functions in the Kombi module. (codable in CIC)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in BDC)
iDrive logo
iDrive start logo
BMW Connected Drive (Version 1)
BMW Connected Drive (Version 2)
M Performance
Alpina Tuning
BMW i
BMW white
BMW brown
Mini
Rolls Royce
BMW Christmas
Logo that is displayed when starting the iDrive system. (codable in NBT)

iDrive start animated
not animated
animated
black screen
Logo that is displayed when starting the iDrive system is animated. Alternatively a black screen without any logo can be displayed. (codable in NBT)

iDrive Menus
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in CIC)

Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in CIC)

Tire pressure menu with temperature
on
off
Also show temperature of the individual tires in the tire pressure menu. This function only works if the tires have tire pressure sensors installed and pressure of the individual tires is already shown. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in CIC)

Message length while driving
no details
one page
up to five pages
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in CIC)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Volume popup
on
off
Show volume popup in the iDrive when changing the volume. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Sport mode configurable in iDrive
on
off
Sport mode can be configured in the iDrive menu. This function needs to be turned on in the iDrive module as well. The function will appear in the iDrive settings under drive mode settings. (codable in ICM)

Instrument Cluster
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Blank information display in dashboard
on
off
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)

Cruise Control speed display
off
3 s
5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)

Date in dashboard
on
off
Show date in dashboard. (codable in KOMBI)

GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Bootlogo for dashboard
BMW
M Performance
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Klimatization
Off-Mode Memory
on
off
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)

Save circulation settings
on
off
Circulation settings are saved for next start of the vehicle. (codable in IHKA)

Automatic compressor with air conditioning
on
off
When pressing the ‘Automatic’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic compressor with recirculation
on
off
When pressing the ‘Recirculation’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic reset to circulating air
on
off
Automatically reset to fresh air after a certain time when the recirculation mode of the A/C is active. (codable in IHKA)

Legal Disclaimer
Legal disclaimer (US)
off
on
permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in CIC)

Camera disclaimer
off
on
permanent
Show legal disclaimer for rear view camera. (codable in CIC)

Night Vision disclaimer
off
on
permanent
Show legal disclaimer for night vision view camera. (codable in CIC)

Locking
Optical confirmation – locking vehicle
off
1
2
3
Number of times the turn signals are turned on when locking the vehicle. (codable in BDC)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in BDC)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in BDC)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in BDC)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in BDC)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in BDC)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FZD)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. (codable in FZD)

Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in FZD)

Mirrors
Comfort folding for sideview mirrors
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in BDC)

Unfold mirrors after comfort close
on
off
Mirrors are automatically unfolded when the car is unlocked, if they were folded by the comfort closing function. (codable in BDC)

Auto-Unfold mirrors
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
40 kph / 25 mph
Speed at which folded mirrors are automatically unfolded. (codable in BDC)

Mirror tilt 1/2
on
off
Requirement for mirror tilt functions. (codable in BDC)

Mirror tilt 2/2
on
off
Requirement for mirror tilt functions. (codable in BDC)

Tilt mirror in reverse
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in BDC)

Mirror tilt while reversing
weak
medium
strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in BDC)

Mirror fold with hazard lights
on
off
Mirrors can be folded via comfort closing while hazard lights are active. (codable in BDC)

Maximum speed mirror fold
10 kph / 6 mph
20 kph / 12 mph
40 kph / 25 mph
60 kph / 37 mph
Maximum speed at which folding the mirrors is possible. (codable in BDC)

Navigation
Navigation fuel stop suggestion
on
off
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in CIC)

Route Info
on
off
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in CIC)

Navigation geo coordinates
on
off
Show geo coordinates in latitude and longitude in the navigation menu. (codable in CIC)

Navigation while updating
on
off
Allow using the navigation system while the maps are being updated. (codable in CIC)

Arrow view in main window
on
off
Arrow view is also available in the main window and not only in the split screen window. (codable in CIC)

Navigation current position
on
off
Show option to display current position in the navigation menu. (codable in CIC)

Range map
on
off
Range map is available in the main window as a possible map. (codable in NBT)

Route magnet
on
off
Display route magnet as a possible method for recalculating the active route. (codable in NBT)

Route preview
on
off
Display the route preview menu. This function is also known as ‘Route simulator’. If available, also activate ‘Route preview – addition’. (codable in NBT)

Route preview – addition
on
off
Only change this function with ‘Route preview’. (codable in NBT)

Opening
Optical confirmation – unlocking vehicle
off
1
2
3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in BDC)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in BDC)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in BDC)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in BDC)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in BDC)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in BDC)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in BDC)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in BDC)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FZD)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in FZD)

Park Distance Control (PDC)
PDC view
vertical (F-Models)
horizontal (E-Models)
Direction of park distance control view. (codable in CIC)

PDC in reverse
on
off
Activate PDC as soon as car is rolling backwards/reversing. (codable in PDC)

Warning sound volume front
very weak
weak
medium
strong
very strong
Volume for the warning sound of the front PDC. (codable in PDC)

Warning sound volume rear
very weak
weak
medium
strong
very strong
Volume for the warning sound of the rear PDC. (codable in PDC)

PDC turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
20 m / 66 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)

PDC turn off – speed limit
when putting in forward gear
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)

Reversing camera turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
20 m / 66 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)

Reversing camera turn off – speed limit
when putting in forward gear
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)

Parking Light
Fog lights with standing lights
on
off
Fog lights can be turned on when the light switch is in the standing lights position. (codable in BDC)

Parking lights
on
off
Parking lights function is active/not active. One sided parking lights are activated by turning on the turn signals after turning off the ignition and locking the car. (codable in BDC)

Power Windows
Continue window action when door is opened
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in BDC)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in BDC)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in BDC)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in BDC)

Rain Light Sensor
Rain light sensor sensitivity
very sensitive
sensitive
normal
insensitive
daytime running lights
standard
Sensitivity of rain light sensor. (codable in BDC)
Rear lights / tail lights
Rear fog lights
on
off
Activate rear fog light function. To activate this function, please also activate the rear fog lights in the REM module. (codable in GBDCMAIN)
Seat
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Easy entry/exit aid
off
driver
passenger
When entering/leaving the car the seat is widened (with the lumbar width adjustment) so entering/leaving the car is easier. (codable in SM_FA)

Seat position memory confirmation
on
off
When saving the seat position with the memory buttons in the car, a short Gong sound is played. (codable in SM_FA)

Seating Heater
Seat heater temp. level 1 – armrest front
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in BDC)

Seat heater temp. level 2 – armrest front
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in BDC)

Seat heater temp. level 3 – armrest front
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in BDC)

Seat heater temp. level 1 – seat front
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in BDC)

Seat heater temp. level 2 – seat front
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in BDC)

Seat heater temp. level 3 – seat front
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in BDC)

Seat heater temp. level 1 – armrest rear
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in BDC)

Seat heater temp. level 2 – armrest rear
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in BDC)

Seat heater temp. level 3 – armrest rear
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in BDC)

Seat heater temp. level 1 – seat rear
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in BDC)

Seat heater temp. level 2 – seat rear
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in BDC)

Seat heater temp. level 3 – seat rear
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in BDC)

Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Sidemarker
US Sidemarker left brightness
off
very low
low
medium
high
very high
Brightness of the US Sidemarker on the left side. (codable in BDC)

US Sidemarker right brightness
off
very low
low
medium
high
very high
Brightness of the US Sidemarker on the right side. (codable in BDC)

US Sidemarker left
on
off
off (alternative)
Light for the US Sidemarker on the left side. If switch setting is ‘0’, the function does not have an effect. If switch setting is ‘A’, the function does only have an effect if it’s dark. In addition the brightness has to be set to ‘High’. (codable in BDC)

US Sidemarker right
off
on
off (alternative)
Light for the US Sidemarker on the right side. If switch setting is ‘0’, the function does not have an effect. If switch setting is ‘A’, the function does only have an effect if it’s dark. In addtion the brightness has to be set to ‘High’. (codable in BDC)

Speedometer
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Spoiler
Raising speed for spoiler
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Vehicle speed in kph or mph at which spoiler automatically raises. Raising speed has to be higher than the lowering speed. The lowering speed can be changed with ‘lowering speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Lowering speed for spoiler 2/2
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Only change this function with ‘Lowering speed for spoiler 1/2’. (codable in HKL2)

Lowering speed spoiler 1/2
50 kph / 31 mph
70 kph / 45 mph
90 kph/ 55 mph
Vehicle speed in kph or mph at which spoiler automatically lowers. Lowering speed has to be lower than the raising speed. The raising speed can be changed with ‘Raising speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Sport display
Sport display – unit for performance
hp
kW
Unit for performance in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display – unit for torque
Nm
lb ft
kgm
Unit for torque in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in CIC)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in CIC)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tail gate/Rear lid
Optical confirmation – tail gate
on
off
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in FZD)

Close trunk with keyfob
on
off
Close the trunk/rear lid via the keyfob. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Close trunk with footwell switch
on
off
Close the trunk/rear lid with the interior footwell switch. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Close trunk with keyfob – addition
on
off
Only change this function with ‘Close trunk with keyfob’. (codable in HKL – the HKL module is only available, if the car has a button to electronically close the tailgate/trunk lid)

Tank
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Telephone
Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Selection of ringtone
BMW
Mini
Selection of the ringtone which sounds when a call comes in. To use the ringtone of your phone, please turn ‘Use telephone ringtone’ on. (codable in CIC)

Use telephone ringtone
on
off
Playback of the telephone ringtone on the car speakers. (codable in CIC)

Message length while driving
no details
one page
up to five pages
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in CIC)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Siri Eyes-Free button
on
off
When pressing and holding the voice command button on the steering wheel ‘Siri Eyes-Free’ is activated. This function can only be used by iOS devices. Siri has to be active on the iPhone. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Number of addresses/messages for storing
1
5
10
20
25
30
40
50
Maximum number of messages/addresses to be stored in the car. (codable in COMBOX)

Tire Pressure Monitoring
Tyre pressure monitoring system
on
off
Use this function to turn off the tyre pressure monitoring system (TPMS). This coding can’t be used to retrofit TPMS to a car. (codable in KOMBI)
Tires
Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Turn signals
Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

One-touch turn signal function
1
3
Number of turn signals when tapping the turn signal. In some cases, this option also needs to be enabled in the iDrive. (codable in BDC)

Optical confirmation – unlocking vehicle
off
1
2
3
Number of times the turn signals are turned on when unlocking the vehicle. (codable in BDC)

Optical confirmation – locking vehicle
off
1
2
3
Number of times the turn signals are turned on when locking the vehicle. (codable in BDC)

Turn signals in Head-Up Display
on
off
Show menu in the iDrive to turn on signals and hazard lights in the head up display. To activate this function, please activate ‘Turn signals in Head-Up Display’ in the HUD/Kombi module. (codable in CIC)

Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. (codable in FZD)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. (codable in FZD)

Alarm with turn signals
on
off
Turn signals blink when alarm is initiated. (codable in FZD)

Video in Motion
Video in motion 1/3
off
3 kph / 2 mph
8 kph / 5 mph
on
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in CIC)

Video in motion 2/3
off
3 kph / 2 mph
10 kph / 6 mph
on
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion 3/3
on
off
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in CIC)

Video in motion menu
on
off
Enable menu to activate video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. To deactivate video in motion, please deactivate and activate this coding again and follow the steps afterwards. (codable in NBT)

Video only with handbrake
on
off
Only allow watching video while the handbrake is pulled. In order to watch video while driving, set this function to ‘not active’ and activate all parts of ‘Video in motion’. Video in motion is only possible if the car supports watching TV or playing DVDs while standing. If available, also deactivate ‘Video only with handbrake – addition’. (codable in NBT)

Video format support 1/3
on
off
Enable playback of videos in more video formats. (codable in NBT)

Video format support 2/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

Video format support 3/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

DVD menu button during playing
DVD menu button
title list button
When playing a DVD instead of the ‘Title list’ button a button is shown to activate the own menu of the DVD, like on a DVD player. (codable in NBT)

Video Playback via USB
on
off
off (alternative)
Play videos on a USB-Stick. (codable in NBT)

Video Playback from iPhone
on
off
off (alternative)
Play videos from iPhone. This only works if the iPhone is connected via a snap-in adapter. This does not work if the iPhone is connected via a USB cable. (codable in NBT)

Video only with handbrake – addition
off
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Only change this function with ‘Video only with handbrake’. (codable in NBT)

Voltage Monitoring
Low beams left voltage monit. 1/2
on
off
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in BDC)

Low beams left voltage monit. 2/2
on
off
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Low beams right voltage monit. 1/2
on
off
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in BDC)

Low beams right voltage monit. 2/2
on
off
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

High beams left voltage monit. 1/2
on
off
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in BDC)

High beams left voltage monit. 2/2
on
off
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

High beams right voltage monit. 1/2
on
off
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in BDC)

High beams right voltage monit. 2/2
on
off
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Turn signals front left voltage monit. 1/2
on
off
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in BDC)

Turn signals front left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Turn signals front right voltage monit. 1/2
on
off
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in BDC)

Turn signals front right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Front fog lights left voltage monit. 1/2
on
off
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in BDC)

Front fog lights left voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Front fog lights right voltage monit. 1/2
on
off
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in BDC)

Front fog lights right voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Daytime running lights left voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights left. Might cause flickering of LED lights. (codable in BDC)

Daytime running lights left voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Daytime running lights right voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights right. Might cause flickering of LED lights. (codable in BDC)

Daytime running lights right voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Turn signals front left warning
on
off
Warning for malfunction of Turn signals front left in the on board computer. (codable in BDC)

Turn signals front right warning
on
off
Warning for malfunction of Turn signals front right in the on board computer. (codable in BDC)

Turn signals rear left voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in BDC)

Turn signals rear left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Turn signals rear right voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in BDC)

Turn signals rear right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Standing lights outer rear left voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights outer rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights outer rear right voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights outer rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights inner rear left voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights inner rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights inner rear right voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights inner rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Reversing lights left voltage monit. 1/2
on
off
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in BDC)

Reversing lights left voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Reversing lights right voltage monit. 1/2
on
off
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in BDC)

Reversing lights right voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Rear fog light left voltage monit. 1/2
on
off
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in BDC)

Rear fog light left voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Rear fog light right voltage monit. 1/2
on
off
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in BDC)

Rear fog light right voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Brake lights left voltage monit. 1/2
on
off
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in BDC)

Brake lights left voltage monit. 2/2
on
off
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Brake lights right voltage monit. 1/2
on
off
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in BDC)

Brake lights right voltage monit. 2/2
on
off
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Third brake light voltage monit. 1/2
on
off
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in BDC)

Third brake light voltage monit. 2/2
on
off
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in BDC)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in BDC)

Warnings
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Temperature warning
on
off
Warning for outside temperature below 4° C / 39° F is active/not active. (codable in KOMBI)

Reverse gear gong
on
off
Gong for reverse gear is active/not active. (codable in KOMBI)

Low beams left warning
on
on (alternative)
off
Warning for malfunction of Low beams left in the on board computer. (codable in BDC)

Low beams right warning
on
on (alternative)
off
Warning for malfunction of Low beams right in the on board computer. (codable in BDC)

High beams left warning
on
on (alternative)
off
Warning for malfunction of High beams left in the on board computer. (codable in BDC)

High beams right warning
on
on (alternative)
off
Warning for malfunction of High beams right in the on board computer. (codable in BDC)

Front fog lights left warning
on
on (alternative)
off
Warning for malfunction of Front fog lights left in the on board computer. (codable in BDC)

Front fog lights right warning
on
off
Warning for malfunction of Front fog lights right in the on board computer. (codable in BDC)

Daytime running lights left warning
on
on (alternative)
on (Japan)
off
Warning for malfunction of Daytime running lights left in the on board computer. (codable in BDC)

Daytime running lights right warning
on
on (alternative)
on (Japan)
off
Warning for malfunction of Daytime running lights right in the on board computer. (codable in BDC)

Turn signals rear left warning
on
off
Warning for malfunction of Turn signals rear left in the on board computer. (codable in BDC)

Turn signals rear right warning
on
off
Warning for malfunction of Turn signals rear right in the on board computer. (codable in BDC)

Standing lights outer rear left warning
on
on (alternative)
off
Warning for malfunction of outer rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights outer rear right warning
on
on (alternative)
off
Warning for malfunction of outer rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights inner rear left warning
on
off
Warning for malfunction of inner rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Standing lights inner rear right warning
on
off
Warning for malfunction of inner rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Reversing lights left warning
on
on (alternative)
off
Warning for malfunction of left reversing lights in the on board computer. (codable in BDC)

Reversing lights right warning
on
on (alternative)
off
Warning for malfunction of right reversing lights in the on board computer. (codable in BDC)

Rear fog light left warning
on
off
Warning for malfunction of rear left fog light in the on board computer. (codable in BDC)

Rear fog light right warning
on
off
Warning for malfunction of rear right fog light in the on board computer. (codable in BDC)

Brake lights left warning
on
on (alternative)
off
Warning for malfunction of left braking lights in the on board computer. (codable in BDC)

Brake lights right warning
on
on (alternative)
off
Warning for malfunction of right braking lights in the on board computer. (codable in BDC)

Third brake light warning
on
off
Warning for malfunction of third brake light in the on board computer. (codable in BDC)

License plate light warning
on
off
Warning for malfunction of license plate lights in the on board computer. (codable in BDC)

Seat belt reminder driver
on
off
Seat belt reminder for driver is active/ inactive. (codable in CSM)

Seat belt reminder passenger
on
off
Seat belt reminder for passenger is active/ inactive. (codable in CSM)

Seat belt reminder – distance
100 m / 330 ft
200 m / 660 ft
500 m / 0.31 mls
1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in CSM)

Seat belt reminder – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in CSM)

Seat belt reminder – duration
5s
10s
30s
60s
90s
100s
120s
Duration of seat belt reminder warnings. (codable in CSM)

Seat belt reminder – driver unbuckled
on
off
When the driver unbuckles his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt reminder – passenger unbuckled
on
off
When the passenger unbuckles his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt reminder – ignition on
on
off
When the ignition is turned on and the driver has not put on his/her seat belt a short seat belt reminder warning is activated. (codable in CSM)

Seat belt status display driver
on
off
Display of the seat belt status for the driver (buckled/unbuckled) in the dashboard. (codable in CSM)

Seat belt status display passenger
on
off
Display of the seat belt status for the passenger (buckled/unbuckled) in the dashboard. (codable in CSM)

Seat belt status display rear seats
on
off
Display of the seat belt status for the rear seats (buckled/unbuckled) in the dashboard. (codable in CSM)

Seatbelt Reminder Driver
on
off
Deactivate the driver’s acustic seatbelt reminder. To undo the coding run the backup. (codable in GCSMSEATBELTS)

Seatbelt Reminder Passenger
on
off
Deactivate the passenger’s acustic seatbelt reminder. To undo the coding run the backup. (codable in GCSMSEATBELTS)

Seatbelt Display Reminder Driver
on
off
Deactivate/activate the driver’s optical seatbelt reminder inside KOMBI. (codable in GCSMSEATBELTS)

Seatbelt Display Reminder Passenger
on
off
Deactivate/activate the passenger’s optical seatbelt reminder inside KOMBI. (codable in GCSMSEATBELTS)

Welcome Light
Welcome lights – standing lights front left
off
turn on softly
turn on hard
Standing lights front left are turned on with welcome lights. (codable in BDC)

Welcome lights – standing lights front right
off
turn on softly
turn on hard
Standing lights front right are turned on with welcome lights. (codable in BDC)

Welcome lights – DRL left
off
turn on softly
turn on hard
Daytime running lights left are turned on with welcome lights. (codable in BDC)

Welcome lights – DRL right
off
turn on softly
turn on hard
Daytime running lights right are turned on with welcome lights. (codable in BDC)

Welcome lights – low beams left
off
turn on softly
turn on hard
Low beams left are turned on with welcome lights. (codable in BDC)

Welcome lights – low beams right
off
turn on softly
turn on hard
Low beams right are turned on with welcome lights. (codable in BDC)

Welcome lights – turn signal front left
off
turn on softly
turn on hard
Turn signal front left are turned on with welcome lights. (codable in BDC)

Welcome lights – turn signal front right
off
turn on softly
turn on hard
Turn signal front right are turned on with welcome lights. (codable in BDC)

Welcome lights – turn signal mid left
off
turn on softly
turn on hard
Turn signal mid (mirrors) left are turned on with welcome lights. (codable in BDC)

Welcome lights – turn signal mid right
off
turn on softly
turn on hard
Turn signal mid (mirrors) right are turned on with welcome lights. (codable in BDC)

Welcome lights – design lights left
off
turn on softly
turn on hard
Design lights left are turned on with welcome lights. (codable in BDC)

Welcome lights – design lights right
off
turn on softly
turn on hard
Design lights right are turned on with welcome lights. (codable in BDC)

Welcome lights – high beams left
off
turn on softly
turn on hard
High beams left are turned on with welcome lights. (codable in BDC)

Welcome lights – high beams right
off
turn on softly
turn on hard
High beams right are turned on with welcome lights. (codable in BDC)

Welcome lights – front fog lights left
off
turn on softly
turn on hard
Front fog lights left are turned on with welcome lights. (codable in BDC)

Welcome lights – front fog lights right
off
turn on softly
turn on hard
Front fog lights right are turned on with welcome lights. (codable in BDC)

Welcome lights – turn signals rear left
off
turn on softly
turn on hard
Turn signals rear left are turned on with welcome lights. (codable in BDC)

Welcome lights – turn signals rear right
off
turn on softly
turn on hard
Turn signals rear right are turned on with welcome lights. (codable in BDC)

Welcome lights – stand. lights outer rear left
off
turn on softly
turn on hard
Outer standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Welcome lights – stand. lights outer rear right
off
turn on softly
turn on hard
Outer standing lights rear right are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Welcome lights – stand. lights inner rear left
off
turn on softly
turn on hard
Inner standing lights rear left are turned on with welcome lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in BDC)

Welcome lights – reversing lights left
off
turn on softly
turn on hard
Reversing lights left are turned on with welcome lights. (codable in BDC)

Welcome lights – reversing lights right
off
turn on softly
turn on hard
Reversing lights right are turned on with welcome lights. (codable in BDC)

Welcome lights – rear fog lights left
off
turn on softly
turn on hard
Rear left fog lights are turned on with welcome lights. (codable in BDC)

Welcome lights – rear fog lights right
off
turn on softly
turn on hard
Rear right fog lights are turned on with welcome lights. (codable in BDC)

Welcome lights – braking lights left
off
turn on softly
turn on hard
Braking lights left are turned on with welcome lights. (codable in BDC)

Welcome lights – braking lights right
off
turn on softly
turn on hard
Braking lights right are turned on with welcome lights. (codable in BDC)

Welcome lights – third brake light
off
turn on softly
turn on hard
Third brake light is turned on with welcome lights. (codable in BDC)

Welcome lights – number plate lighting
off
turn on softly
turn on hard
Number plate lights are turned on with welcome lights. (codable in BDC)

Welcome lights
on
off
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in BDC)

Welcome lights – only when dark
on
off
Welcome lights are only turned on when the rain-light sensor (RLS) recognizes it is dark outside. Only works if rain-light sensor is installed. (codable in BDC)

Welcome-lights – light switch position
off
A
A or 2
Positions for the light switch where the welcome-lights function is activated. (codable in BDC)

Welcome lights – brightness
off
very low
low
medium
high
very high
Brightness of exterior lights for welcome lights. (codable in BDC)

Welcome lights duration
10s
20s
40s
90s
150s
240s
Duration of the welcome lights in seconds. (codable in BDC)

Active Sound Design
Active Sound Design Mode
off
M5/M6
Mode for Active Sound Design. The Active Sound Design module produces an amplified exhaust sound in the interior through the speakers. If you disable this function a fault code in the ASD might appear. To remove this fault code restore the ASD from ist original backup, since the fault code appeared because the ASD has been disabled. (codable in ASD)

Active Sound Design Volume
very quiet
quiet
medium
loud
very loud
Volume for active sound design. (codable in ASD)

Alarm System
Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in NBT)

Optical confirmation – tail gate
off
on
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in GFZD)

Alarm type
Europe/USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in GFZD)

Audible confirmation – length
very short
short
medium
long
very long
Length of audible confirmation chirp. (codable in GFZD)

Audible confirmation – pitch
very low
low
medium
high
very high
Pitch for audible confirmation. (codable in GFZD)

Audible confirmation – min. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Minimum volume for the audible confirmation chirp. (codable in GFZD)

Audible confirmation – max. volume
7%
13%
20%
27%
33%
40%
47%
53%
60%
67%
73%
80%
87%
93%
100%
Maximum volume for the audible confirmation chirp. (codable in GFZD)

Alarm with turn signals
off
on
Turn signals blink when alarm is initiated. (codable in GFZD)

Alarm with dimmed headlights
off
on
Dimmed headlights blink when alarm is initiated. (codable in GFZD)

Alarm with high beams
off
on
High beams blink when alarm is initiated. (codable in GFZD)

Audible confirmation – locking vehicle
off
after locking and closing all doors
after locking
Audible confirmation for locking vehicle is active/not active. (codable in GFZD)

Ambient lighting
Individual ambient light
on
off
Show menu in iDrive to individualize ambient light. Functions depend on the installed lights. (codable in NBT)
Audio
Maximum volume when ignition on
quiet
medium
loud
Maximum volume for radio/music when the vehicle is turned on. The volume of the last drive is used. (codable in NBT)

Warning and menu sounds
BMW
Mini
BMW i
Rolls Royce
Depending on the manufacturer of the vehicle (BMW, Mini, BMW i or Rolls Royce) different sounds are used for warnings and menus. Use this feature to change the sounds to a different brand, for example from ‘BMW’ to ‘Rolly Royce’. (codable in NBT)

Audio source iPhone 1/2
on
on (alternative)
off
If an iPhone is connected via USB (either in the glove box or in the center console) it can be used as an audio source. (codable in NBT)

Audio source iPhone 2/2
on
on (alternative)
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Brake lights
Brake force display – lights
rear turn signals
brake lights
third braking light
Lights to be used for brake force display. (codable in GBDCMAIN)

Brake force display – minimum speed
5 kph / 3 mph
10 kph / 6 mph
30 kph / 19 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in GBDCMAIN)

Cleaning
Threshold washer fluid warning
low
medium
high
very high
Threshold at which the washer fluid warning is turned on. The higher the threshold to activate this warning, the sooner this warning will be shown. (codable in GBDCMAIN)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in GBDCMAIN)

Number of wipes after rear window cleaning
off
1
2
3
4
Number of wipes after rear window is cleaned. (codable in GBDCMAIN)

Wiping interval rear window
off
2s
4s
6s
8s
10s
12s
15s
Interval in seconds for windscreen rear window wipers. (codable in GBDCMAIN)

Reduce wiper speed
off
130 kph / 80 mph
170 kph / 105 mph
210 kph / 130 mph
Threshold at which the wiper speed is reduced. (codable in GBDCMAIN)

Rear window cleaning with low washer liquid
on
off
Rear windows are also cleaned even though the washer fluid level is low. (codable in GBDCMAIN)

Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Number until headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in GBDCMAIN)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in GBDCMAIN)

Length of splash for head lights
0.4 s
0.5 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in GBDCMAIN)

Delay between splashes for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in GBDCMAIN)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Comfort Functions
Door lock after driving away
on
off
Show menu in iDrive to activate door lock after driving away in vehicle settings ‘Doors/Key’. (codable in NBT)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in GBDCWINDOWS)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in GBDCWINDOWS)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in GBDCWINDOWS)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in GBDCWINDOWS)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in GBDCWINDOWS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in GBDCWINDOWS)

Daytime Running Lights
Daytime running lights
display menu
permanently on
permanently off
Set mode of daytime running lights. Set to ‘display menu’ to display a menu in the iDrive settings for changing the mode of daytime running lights. (codable in NBT)

Daytime running lights – light switch
off
A or 0
A, 0 or 1
Positions for the light switch where the daytime running lights function is activated. (codable in GBDCMAIN)

Display
Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Display ‘Diesel’ next to fuel level
on
off
Use this function to show the diesel sign next to fuel level indicator in the Kombi display. Not available in sports mode. (codable in KOMBI)

Display engine power
on
off
Use this function to show horsepowers in the instrument cluster below the rev counter. This display is only active in sports mode. (codable in KOMBI)

Display Layout Kombi
BMW AG
M GmbH
Alpina Tuning
Use this function to change the layout of your Kombi display. When select ‘Alpina’ please also enable ‘Display Layout Kombi – Alpina’ aktiviert werden. (codable in KOMBI)

Display Layout Kombi – Alpina
on
off
Only change this coding in combination with ‘Display Layout Kombi’ when ‘Alpina’ is selected. When coding is active for some models the fuel level may not be calculated correctly. This is because Alpina models normally have larger fuel tanks than 60 liters. Therefore, please check the fuel indicator after coding this function. (codable in KOMBI)

Logo KOMBI
no logo
edrive
M-Sport
m550i
m550d
m40d
m760i
m760il
B7 Biturbo
B7
B6 Biturbo
B6
B5 Biturbo
D5 Biturbo
XD3 Biturbo
m750ld
m750d
V12
Use this function so change the logo inside KOMBI display. Not available in M view. (codable in KOMBI)

ECO PRO layout change
on
off
Show menu in iDrive to activate/deactivate the layout change of the instrument cluster when changing to ECO Pro mode. (codable in NBT)

Instant fuel consumption
on
off
Activate an iDrive menu to show the instant fuel consumption display in the instrument cluster. (codable in NBT)

Drive mode warning
on
off
Show menu in iDrive to activate/deactivate the warning message after chaging the drive mode. (codable in NBT)

Speedometer Zoom
on
off
Show menu in iDrive to activate highlighting the current speed in the speedometer. (codable in NBT)

X View menu
on
off
Show ‘X View’ menu in the iDrive. In this menu you can check the current pitch and roll of your vehicle. This option is only available for vehicles with all-wheel-drive. (codable in NBT)

Automatic clock change 1/2
on
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 2/2’. (codable in NBT)

Bang Olufsen sound menu
on
on (alternative)
off
Show Bang and Olufsen menu in iDrive. Use this menu to access special Bang and Olufsen equalizer settings. Some functions depend on the installed speakers. (codable in NBT)

M-driving dynamics
on
off
Show menu in iDrive inside instrument cluster settings to activate M-driving dynamics. These menu options can only be used in M model cars. (codable in NBT)

Show KW/MW radio band
on
show MW menu
show KW menu
off
Use this function to enable or hide the MW and KW menus in the radio menu. (codable in NBT)

Automatic time setting 2/2
on
on (alternative)
off
When daylight savings time is active/not active, automatically update the time. Only change with ‘Automatic time setting 1/2’. (codable in NBT)

Drive assistant
Blind spot detection – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Speed at which the blind spot detection is turned on. This function has only an effect if the car is equipped with a blind spot detection. (codable in ICM)
Drive dynamic
Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in NBT)
Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GBDCWINDOWS)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in GBDCWINDOWS)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in GBDCWINDOWS)

Engine Start Stop
Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Start in Eco / Eco Pro mode
on
off
When turning on the car, the ‘Eco / Eco Pro’ driving mode is automatically activated. Unfortunately, there is no possibility to automatically start the car in ‘Sport’ or ‘Sport+’ mode. (codable in ICM)

Start/Stop-Automatic memory
on
off
Setting for Start/Stop-Automatic is saved. This way the manual setting of the Start/Stop-Automatic button, i.e. whether the button is turned on or off, is saved for the next start. Deactivating the Start/Stop-Automatic on the car can increase the life time of the battery and the starter. (codable in DME)

Default User Mode
Sport Dynamic
Sport Expert
Sport Individual
Comfort
Comfort Plus
Comfort Individual
Eco Pro Efficient
Eco Pro Plus
Eco Pro Individual
PHEV Sport Individual
PHEV Hybrid Standard
PHEV Electric Standard
PHEV Electric Individual
Adaptive
PHEV Sport Standard
Use this coding to select the driving mode at engine start. If the selected mode is not available default value is delected automatically. (codable in GBDCMAIN)

Start/Stop-Automatic default off
on
off
Engine start/stop automatic is turned off by default. (codable in GBDCMAIN)

Gear Shift Indicator
Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in NBT)

Headlight Cleaning
Cleanings until 1st headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned for the first time after the x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Number until headlight cleaning
off
1
3
5
8
10
15
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in GBDCMAIN)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in GBDCMAIN)

Number of splashes for head lights
1
2
3
Number of splashes for cleaning the head lights. (codable in GBDCMAIN)

Length of splash for head lights
0.4 s
0.5 s
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Length of a single splash for head light cleaning. (codable in GBDCMAIN)

Delay between splashes for head lights
0.6 s
0.8 s
1.0 s
1.2 s
1.4 s
1.6 s
1.8 s
2.0 s
Delay between splashes for head light cleaning. (codable in GBDCMAIN)

Head-Up Display
Cruise Control in Head-Up Display
on
off
Only change this function with ‘Cruise Control in Head-Up Display 1/2’. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Startscreen HUD
on
off
Show startscreen when HUD starts. (codable in KOMBI)

Entertainment menu in HUD
on
off
Show radio stations and track list in Head-Up Display. (codable in KOMBI)

Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Cruise Control in HUD – addition
on
off
Only change this function with ‘Cruise Control in Head-Up Display ‘. This function needs to be activated in additon. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

HUD Startup time
off
very short
short
medium
long
very long
Time for start logo screen when Head-Up display is turned on. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Voice command in HUD
on
off
Display voice command confirmation information in Head-Up Display. (codable in KOMBI)

Lane change in Head-Up Display
on
off
Use this function to show lane change warning in the head up display. (codable in KOMBI)

Highway junction images on HUD
on
off
Show Highway junction images on HUD. (codable in NBT)

Cruise Control in Head-Up Display
on
off
Show cruise control in head-up display whenever cruise control is turned on. To activate this function also activate ‘Cruise Control in Head-Up Display’ in the Kombi module. (codable in NBT)

Entertainment/Telephone information in HUD
on
off
Adds checkbox in Head Up Display settings for entertainment/telephone in iDrive. To show information for entertainment and telephone, please also activate the HUD functions in the Kombi module. (codable in NBT)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in GBDCMAIN)
iDrive logo
iDrive start logo
BMW Connected Drive (Version 1)
BMW Connected Drive (Version 2)
M Performance
Alpina Tuning
BMW i
BMW white
BMW brown
Mini
Rolls Royce
BMW Christmas
Logo that is displayed when starting the iDrive system. (codable in NBT)

iDrive start animated
not animated
animated
black screen
Logo that is displayed when starting the iDrive system is animated. Alternatively a black screen without any logo can be displayed. (codable in NBT)

iDrive Menus
Message length while driving
no details
one page
up to three lines
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in NBT)

Audible confirmation menu
on
off
Show menu for audible confirmation for locking/unlocking in iDrive. This coding only works when the FZD module is installed. (codable in NBT)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in NBT)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in NBT)

Sport mode configurable in iDrive
on
off
off (alternative)
Sport mode can be configured in the iDrive menu. This function will appear in the iDrive settings under drive mode settings. If this function is available in the ICM module, you have to activate it, too. (codable in NBT)

Tire pressure menu with temperature
on
off
Also show temperature of the individual tires in the tire pressure menu. This function only works if the tires have tire pressure sensors installed and pressure of the individual tires is already shown. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Gear Shift Indicator menu
on
off
Show menu in the iDrive settings to enable/disable the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in NBT)

Volume popup
on
off
Show volume popup in the iDrive when changing the volume. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Sport mode configurable in iDrive
on
off
Sport mode can be configured in the iDrive menu. This function needs to be turned on in the iDrive module as well. The function will appear in the iDrive settings under drive mode settings. (codable in ICM)

Instrument Cluster
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Blank information display in dashboard
on
off
Blank information display in dashboard is shown when you switch the information displays with the BC button. (codable in KOMBI)

Cruise Control speed display
off
3 s
5 s
The set speed of the cruise control is shown for a couple of seconds in the on board computer. (codable in KOMBI)

Date in dashboard
on
off
Show date in dashboard. (codable in KOMBI)

GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)

Gear shift indicator and suggestion 1/3
on
off
Gear shift indicator in the on board computer. To activate this function, also activate other codings for ‘Gear shift indicator’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Gear shift indicator and suggestion 2/3
on
off
Only change with ‘Gear shift indicator 1/2’. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. It suggests the best gear only in M6T. (codable in KOMBI)

Date incl. Time in dashboard
on
off
Show date including current time in the dashboard. In order to activate this function, please also activate ‘Date in dashboard’. (codable in KOMBI)

Gear shift indicator in sport mode
on
off
Gear shift indicator is also shown in sport mode. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Start/Stop notification in dashboard
on
off
When the engine start/stop function is available the start/stop symbol in the dashboard appears. This function has only an effect if the dashboard is equipped with a start/stop symbol. (codable in KOMBI)

Bootlogo for dashboard
BMW
M Performance
Bootlogo for dashboard when ignition is turned on. This function only works if the dashboard display reaches at least from the middle to under the rpm meter. This coding shows no effect on smaller displays. (codable in KOMBI)

Gear shift indicator current gear
on
off
Current gear is permanently displayed in the gear shift indicator. Since some gearbox types (especially automatic) do not provide the data for the Gear Shift Indicator to the KOMBI, the Gear Shift Indicator might be inactive or permanently show no current gear, even after enabling this function. (codable in KOMBI)

Color of Navigation Graphics
orange
HUD orange, Instruments gray
Use this function to change the color of navigation graphics in cluster (Head-Up and instrument cluster display). (codable in KOMBI)

Display compass
on
off
Show the compass in board computer (OBC). Select compass by pushing the ‘BC’ button on the left side of the indicator arm. (codable in KOMBI)

Klimatization
Off-Mode Memory
on
off
Save setting for ‘Off-mode’ for the air conditioning. (codable in IHKA)

Save circulation settings
on
off
Circulation settings are saved for next start of the vehicle. (codable in IHKA)

Automatic compressor with air conditioning
on
off
When pressing the ‘Automatic’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic compressor with recirculation
on
off
When pressing the ‘Recirculation’ button for air conditioning, the compressor for air conditioning does not start by itself. (codable in IHKA)

Automatic reset to circulating air
on
off
Automatically reset to fresh air after a certain time when the recirculation mode of the A/C is active. (codable in IHKA)

Legal Disclaimer
Legal disclaimer (US)
off
on
permanent
Show legal disclaimer when iDrive is started. This warning is usually only shown in US-models. (codable in NBT)

Camera disclaimer
off
on
permanent
Show legal disclaimer for rear view camera. (codable in NBT)

Night Vision disclaimer
off
on
permanent
Show legal disclaimer for night vision view camera. (codable in NBT)

Locking
Optical confirmation – locking vehicle
off
after locking and closing all doors
after locking
Optical confirmation for locking vehicle is active/not active. (codable in GFZD)

Optical confirmation – tail gate
off
on
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in GFZD)

Audible confirmation – locking vehicle
off
after locking and closing all doors
after locking
Audible confirmation for locking vehicle is active/not active. (codable in GFZD)

Comfort close sunroof immediately
on
off
Start closing the sunroof immediately during comfort closing. (codable in GBDCWINDOWS)

Comfort close windows simultaneously
on
off
Front and back windows close simultaneously during comfort closing. (codable in GBDCWINDOWS)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in GBDCWINDOWS)

Mirrors
Comfort folding for sideview mirrors
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nWhen holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. May need additional coding of the ‘CAS’ module. (codable in GBDCMAIN)

Unfold mirrors after comfort close
on
off
Mirrors are automatically unfolded when the car is unlocked, if they were folded by the comfort closing function. (codable in GBDCMAIN)

Mirror tilt 1/2
on
off
Requirement for mirror tilt functions. (codable in GBDCMAIN)

Mirror tilt 2/2
on
off
Requirement for mirror tilt functions. (codable in GBDCMAIN)

Tilt mirror in reverse
on
off
This function requires an installed LIN-Bus (usually installed with mirror heating).nPassenger mirror is tilted when switching into reverse gear and the mirror switch is set to the driver side. To activate this function activate ‘Mirror tilt’ as well. (codable in GBDCMAIN)

Mirror tilt while reversing
weak
medium
strong
very strong
Tilt of mirrors with activated reverse gear. In order to activate this function, please also activate ‘Tilt mirror in reverse’. (codable in GBDCMAIN)

Mirror fold with hazard lights
on
off
Mirrors can be folded via comfort closing while hazard lights are active. (codable in GBDCMAIN)

Navigation
Navigation fuel stop suggestion
on
off
Show suggestions for fuel stops along the way to the destination in ‘Route info’ when navigation system is active. (codable in NBT)

Route Info
on
off
Display the ‘Route Info’ menu. In the ‘Route Info’ menu you can check the current navigation turn by turn. (codable in NBT)

Navigation current position
on
off
Show option to display current position in the navigation menu. (codable in NBT)

Navigation geo coordinates
on
off
Show geo coordinates in latitude and longitude in the navigation menu. (codable in NBT)

Navigation while updating
on
off
Allow using the navigation system while the maps are being updated. (codable in NBT)

Range map
on
off
Range map is available in the main window as a possible map. (codable in NBT)

Route magnet
on
off
Display route magnet as a possible method for recalculating the active route. (codable in NBT)

Route preview
on
off
Display the route preview menu. This function is also known as ‘Route simulator’. If available, also activate ‘Route preview – addition’. (codable in NBT)

Route preview – addition
on
off
Only change this function with ‘Route preview’. (codable in NBT)

Opening
Optical confirmation – unlocking vehicle
off
on
Optical confirmation for unlocking vehicle is active/not active. (codable in GFZD)

Comfort open sunroof immediately
on
off
Start opening the sunroof immediately during comfort opening. (codable in GBDCWINDOWS)

Comfort open windows simultaneously
on
off
Front and back windows open simultaneously during comfort opening. (codable in GBDCWINDOWS)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in GBDCWINDOWS)

Comfort open delay
0.0 s
0.5 s
1.5 s
2.5 s
General delay for comfort opening. If ‘0.0s’ is set, comfort opening is immediately started when the car is unlocked. (codable in GBDCWINDOWS)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GBDCWINDOWS)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in GBDCWINDOWS)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in GBDCWINDOWS)

Park Distance Control (PDC)
PDC view
vertical (F-Models)
horizontal (E-Models)
Direction of park distance control view. (codable in NBT)

PDC in reverse
on
off
Activate PDC as soon as car is rolling backwards/reversing. (codable in PDC)

Warning sound volume front
very weak
weak
medium
strong
very strong
Volume for the warning sound of the front PDC. (codable in PDC)

Warning sound volume rear
very weak
weak
medium
strong
very strong
Volume for the warning sound of the rear PDC. (codable in PDC)

PDC turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
20 m / 66 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
PDC is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)

PDC turn off – speed limit
when putting in forward gear
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
36 kph / 22 mph
PDC is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)

Reversing camera turn off – distance limit
when putting in forward gear
1 m / 3 ft
10 m / 33 ft
20 m / 66 ft
50 m / 164 ft
75 m / 264 ft
100 m / 330 ft
150 m / 500 ft
200 m / 660 ft
250 m / 820 ft
Reversing camera is turned off automatically after driving the set distance in forward gear in one piece. (codable in PDC)

Reversing camera turn off – speed limit
when putting in forward gear
1 kph / 1 mph
10 kph / 6 mph
20 kph / 12 mph
36 kph / 22 mph
Reversing camera is turned off automatically after driving faster than the set speed in forward gear. (codable in PDC)

Parking Light
Fog lights with standing lights
on
off
Fog lights can be turned on when the light switch is in the standing lights position. (codable in GBDCMAIN)

Parking lights
on
off
Parking lights function is active/not active. One sided parking lights are activated by turning on the turn signals after turning off the ignition and locking the car. (codable in GBDCMAIN)

Power Windows
Continue window action when door is opened
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in GBDCWINDOWS)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GBDCWINDOWS)

Close window after easy entry
on
off
If the driver side window has been opened via easy entry, the window automatically closes upon locking the vehicle. (codable in GBDCWINDOWS)

Easy entry with every door open
on
off
Activate easy entry every time the car is unlocked. If this function is deactivated, the easy entry is activated by pressing the unlock button on the keyfob twice. (codable in GBDCWINDOWS)

Rain Light Sensor
Rain light sensor sensitivity
very sensitive
sensitive
normal
insensitive
daytime running lights
standard
Sensitivity of rain light sensor. (codable in GBDCMAIN)
Rear lights / tail lights
Rear fog lights
on
off
Activate rear fog light function. To activate this function, please also activate the rear fog lights in the REM module. (codable in GBDCMAIN)
Seat
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Easy entry/exit aid
off
driver
passenger
When entering/leaving the car the seat is widened (with the lumbar width adjustment) so entering/leaving the car is easier. (codable in SM_FA)

Seat position memory confirmation
on
off
When saving the seat position with the memory buttons in the car, a short Gong sound is played. (codable in SM_FA)

Seating Heater
Seating heater memory
off
15 min
24 hours
permanent
The current setting of the seating heater is saved when the engine is turned off. (codable in SM_FA)

Seat heater temp. level 1 – armrest front
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – armrest front
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – armrest front
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the front armrest heater for driver and passenger with front seat heater activated on level 3. (codable in GBDCMAIN)

Seat heater temp. level 1 – seat front
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – seat front
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – seat front
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
51°C / 124°F
Temperature of the front seat heater for driver and passenger with seat heater activated on level 3. (codable in GBDCMAIN)

Seat heater temp. level 1 – armrest rear
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the rear armrest heater with rear seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – armrest rear
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the rear armrest heater with rear seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – armrest rear
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the rear armrest heater with rear seat heater activated on level 3. (codable in GBDCMAIN)

Seat heater temp. level 1 – seat rear
25°C / 77°F
26°C / 79°F
27°C / 81°F
28°C / 82°F
29°C / 84°F
30°C / 86°F
31°C / 88°F
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
Temperature of the rear seat heater with seat heater activated on level 1. (codable in GBDCMAIN)

Seat heater temp. level 2 – seat rear
32°C / 90°F
33°C / 91°F
34°C / 93°F
35°C / 95°F
36°C / 97°F
37°C / 99°F
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
Temperature of the rear seat heater with seat heater activated on level 2. (codable in GBDCMAIN)

Seat heater temp. level 3 – seat rear
38°C / 100°F
39°C / 102°F
40°C / 104°F
41°C / 106°F
42°C / 108°F
43°C / 109°F
44°C / 111°F
45°C / 113°F
46°C / 115°F
47°C / 117°F
48°C / 118°F
49°C / 120°F
50°C / 122°F
Temperature of the rear seat heater with seat heater activated on level 3. (codable in GBDCMAIN)

Speedometer
Digital speedometer
on
off
The current speed is shown in the digital display below the speedometer. (codable in KOMBI)

‘Correction’ speedometer
‘corrected’ speed
true speed
This coding does not work on US models. Per default the speed shown in the speedometer is ‘corrected’ by the car. This has the effect that the shown speed is a bit higher than the true speed of the car. (codable in KOMBI)

Digital Speed Display
off
kmh
kmh (Option 2)
mph
mph (Option 2)
Use this function to display digital speed in instrument cluster. Digital speedometer setting must be enabled in iDrive display settings. (codable in KOMBI)

Spoiler
Raising speed for spoiler
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Vehicle speed in kph or mph at which spoiler automatically raises. Raising speed has to be higher than the lowering speed. The lowering speed can be changed with ‘lowering speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Lowering speed for spoiler 2/2
55 kph / 35 mph
75 kph / 50 mph
95 kph / 60 mph
110 kph / 70 mph
Only change this function with ‘Lowering speed for spoiler 1/2’. (codable in HKL2)

Lowering speed spoiler 1/2
50 kph / 31 mph
70 kph / 45 mph
90 kph/ 55 mph
Vehicle speed in kph or mph at which spoiler automatically lowers. Lowering speed has to be lower than the raising speed. The raising speed can be changed with ‘Raising speed spoiler’. This function will only have an effect if the car is equipped with an electrical spoiler. (codable in HKL2)

Sport display
Sport display – unit for performance
hp
kW
Unit for performance in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display – unit for torque
Nm
lb ft
kgm
Unit for torque in the sport display in the iDrive (if available). (codable in KOMBI)

Sport display
on
off
Sport display for current performance and torque is shown in the ‘Vehicle information’. Since some engines (especially diesel ones) do not provide the data for the sport display to the iDrive, the sport display might be inactive and permanently show ‘0’ even after enabling this function. (codable in NBT)

Sport display – units
on
off
Show menu in the iDrive settings to change the units for the sport display. (codable in NBT)

Sport display – color
red
orange
Color of the sport display. Red is usually used in M-models. (codable in NBT)

Tail gate/Rear lid
Optical confirmation – tail gate
off
on
When the trunk/tail gate is closed while the car is locked the turn signals blink. This coding only works if Comfort Access is installed in the car. (codable in GFZD)

Close trunk with keyfob
on
off
Close the trunk/rear lid via the keyfob. If available, also activate ‘Close trunk with keyfob – addition’. (codable in HKL2)

Close trunk with footwell switch
on
off
Close the trunk/rear lid with the interior footwell switch. (codable in HKL2)

Close trunk with keyfob – addition
on
off
Only change this function with ‘Close trunk with keyfob’. (codable in HKL2)

Tank
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Telephone
Recent call list in HUD
on
off
Show recent call list in Head-Up Display. (codable in KOMBI)

Telephone contacts in HUD
on
off
Show telephone contacts in Head-Up Display. (codable in KOMBI)

Message length while driving
no details
one page
up to three lines
whole text
Length of displayed messages for available office functions while driving, e.g. SMS. (codable in NBT)

Selection of ringtone
BMW
Mini
Selection of the ringtone which sounds when a call comes in. To use the ringtone of your phone, please turn ‘Use telephone ringtone’ on. (codable in NBT)

Use telephone ringtone
on
off
Playback of the telephone ringtone on the car speakers. (codable in NBT)

Phone contacts in ‘Office’ iDrive menu
on
off
Also display phone contacts in the iDrive menu ‘Office’ in addition contacts stored in the car itself. Turn this function off to only display the contacts from the car itself. (codable in NBT)

Siri Eyes-Free button
on
off
When pressing and holding the voice command button on the steering wheel ‘Siri Eyes-Free’ is activated. This function can only be used by iOS devices. Siri has to be active on the iPhone. (codable in NBT)

Messages while driving
while driving
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Display messages of available office functions while driving, e.g. SMS. (codable in NBT)

Tire Pressure Monitoring
Tyre pressure monitoring system
on
off
Use this function to turn off the tyre pressure monitoring system (TPMS). This coding can’t be used to retrofit TPMS to a car. (codable in KOMBI)
Tires
Tire pressure menu in iDrive 1/3
off
pressure
pressure and temperature
Tire pressure menu in iDrive is shown with pressure and optionally temperature. Displaying values only works if the tires have tire pressure sensors installed. This feature only affects the display of the tire pressure menu in the iDrive, it can not be used to disable the tire pressure monitor. (codable in NBT)

Tire pressure menu in iDrive 2/3
on
off
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Tire pressure menu in iDrive 3/3
on
off
off (alternative)
Only change this function with ‘Tire pressure menu in iDrive 1/3’. (codable in NBT)

Turn signals
Turn signal in Head-Up Display
on
off
Show turn signals and hazard lights in the head up display. This function only works on models until 2013. To enable this option, please also activate ‘Turn signals in Head-Up Display – Addition’ in the iDrive module. (codable in KOMBI)

Turn signal in Head-Up Display – Addition
on
off
Only change this function with ‘Turn singal in Head-Up Display’. (codable in KOMBI)

Optical confirmation – unlocking vehicle
off
on
Optical confirmation for unlocking vehicle is active/not active. (codable in GFZD)

Optical confirmation – locking vehicle
off
after locking and closing all doors
after locking
Optical confirmation for locking vehicle is active/not active. (codable in GFZD)

Alarm with turn signals
off
on
Turn signals blink when alarm is initiated. (codable in GFZD)

Video in Motion
Video in motion menu
on
off
Enable menu to activate video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. To deactivate video in motion, please deactivate and activate this coding again and follow the steps afterwards. (codable in NBT)

Video in motion 1/3
off
3 kph / 2 mph
8 kph / 5 mph
on
Enable video and DVD while driving. This is only possible if the car supports watching TV or playing DVDs while standing. In order to enable this option, activate ‘Video in motion 2/3’ and ‘Video in motion 3/3’ as well. If available, also disable ‘Video only with handbrake’. (codable in NBT)

Video in motion 2/3
off
3 kph / 2 mph
10 kph / 6 mph
on
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in NBT)

Video in motion 3/3
on
off
Only change this function with ‘Video in motion 1/3’. This is only possible if the car supports watching TV or playing DVDs while standing. (codable in NBT)

Video only with handbrake
on
off
Only allow watching video while the handbrake is pulled. In order to watch video while driving, set this function to ‘not active’ and activate all parts of ‘Video in motion’. Video in motion is only possible if the car supports watching TV or playing DVDs while standing. If available, also deactivate ‘Video only with handbrake – addition’. (codable in NBT)

Video format support 1/3
on
off
Enable playback of videos in more video formats. (codable in NBT)

Video format support 2/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

Video format support 3/3
on
off
Only change this function with ‘Video format support 1/3’. (codable in NBT)

DVD menu button during playing
DVD menu button
title list button
When playing a DVD instead of the ‘Title list’ button a button is shown to activate the own menu of the DVD, like on a DVD player. (codable in NBT)

Video Playback via USB
on
off
off (alternative)
Play videos on a USB-Stick. (codable in NBT)

Video Playback from iPhone
on
off
off (alternative)
Play videos from iPhone. This only works if the iPhone is connected via a snap-in adapter. This does not work if the iPhone is connected via a USB cable. (codable in NBT)

Video only with handbrake – addition
off
only with handbrake
only in ‘P’ position
only with handbrake and ‘P’ position
only with handbrake or ‘P’ position
Only change this function with ‘Video only with handbrake’. (codable in NBT)

Voltage Monitoring
Low beams left voltage monit. 1/2
on
off
Voltage monitoring for low beams left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Low beams left voltage monit. 2/2
on
off
Deactivate with ‘Low beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Low beams right voltage monit. 1/2
on
off
Voltage monitoring for low beams right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Low beams right voltage monit. 2/2
on
off
Deactivate with ‘Low beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

High beams left voltage monit. 1/2
on
off
Voltage monitoring for high beams left. Might cause flickering of LED lights. (codable in GBDCMAIN)

High beams left voltage monit. 2/2
on
off
Deactivate with ‘High beams left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

High beams right voltage monit. 1/2
on
off
Voltage monitoring for high beams right. Might cause flickering of LED lights. (codable in GBDCMAIN)

High beams right voltage monit. 2/2
on
off
Deactivate with ‘High beams right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals front left voltage monit. 1/2
on
off
Voltage monitoring for turn signals front left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals front left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals front right voltage monit. 1/2
on
off
Voltage monitoring for turn signals front right Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals front right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Front fog lights left voltage monit. 1/2
on
off
Voltage monitoring for front fog lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Front fog lights left voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Front fog lights right voltage monit. 1/2
on
off
Voltage monitoring for front fog lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Front fog lights right voltage monit. 2/2
on
off
Deactivate with ‘Front fog lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights left voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights left voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights right voltage monit. 1/2
on
off
Voltage monitoring for daytime running lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Daytime running lights right voltage monit. 2/2
on
off
Deactivate with ‘Daytime running lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals front left warning
on
off
Warning for malfunction of Turn signals front left in the on board computer. (codable in GBDCMAIN)

Turn signals front right warning
on
off
Warning for malfunction of Turn signals front right in the on board computer. (codable in GBDCMAIN)

Turn signals rear left voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals rear left voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Turn signals rear right voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Turn signals rear right voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Standing lights outer rear left voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear right voltage monit. 1/2
on
off
Voltage monitoring for outer standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights outer rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear left voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear left. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear left voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear left voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear right voltage monit. 1/2
on
off
Voltage monitoring for inner standing lights rear right. Might cause flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear right voltage monit. 2/2
on
off
Deactivate with ‘Standing lights inner rear right voltage monit. 1/2’ to disable flickering of LED lights. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Reversing lights left voltage monit. 1/2
on
off
Voltage monitoring for reversing lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Reversing lights left voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Reversing lights right voltage monit. 1/2
on
off
Voltage monitoring for reversing lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Reversing lights right voltage monit. 2/2
on
off
Deactivate with ‘Reversing lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Rear fog light left voltage monit. 1/2
on
off
Voltage monitoring for rear left fog light. Might cause flickering of LED lights. (codable in GBDCMAIN)

Rear fog light left voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Rear fog light right voltage monit. 1/2
on
off
Voltage monitoring for rear right fog light. Might cause flickering of LED lights. (codable in GBDCMAIN)

Rear fog light right voltage monit. 2/2
on
off
Deactivate with ‘Rear fog light right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Brake lights left voltage monit. 1/2
on
off
Voltage monitoring for brake lights left. Might cause flickering of LED lights. (codable in GBDCMAIN)

Brake lights left voltage monit. 2/2
on
off
Deactivate with ‘Brake lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Brake lights right voltage monit. 1/2
on
off
Voltage monitoring for brake lights right. Might cause flickering of LED lights. (codable in GBDCMAIN)

Brake lights right voltage monit. 2/2
on
off
Deactivate with ‘Brake lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Third brake light voltage monit. 1/2
on
off
Voltage monitoring for third brake light. Might cause flickering of LED lights. (codable in GBDCMAIN)

Third brake light voltage monit. 2/2
on
off
Deactivate with ‘Third brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in GBDCMAIN)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in GBDCMAIN)

Warnings
Threshold for low range warning
off
8 km
10 km / 6 mi
20 km / 12 mi
50 km / 31 mi
8 mi
15 mi
30 mi
Threshold for low range warning due to low fuel level. (codable in KOMBI)

Threshold for fuel reserve warning
off
15 km
20 km / 12 mi
50 km / 31 mi
90 km
15 mi
30 mi
50 mi
Use this function to change the threshold for the low range warning due to low fuel level. (codable in KOMBI)

Temperature warning
on
off
Warning for outside temperature below 4° C / 39° F is active/not active. (codable in KOMBI)

Reverse gear gong
on
off
Gong for reverse gear is active/not active. (codable in KOMBI)

Seat belt reminder driver
on
off
Seat belt reminder for driver is active/ inactive. (codable in GCSMSEATBELTS)

Seat belt reminder passenger
on
off
Seat belt reminder for passenger is active/ inactive. (codable in GCSMSEATBELTS)

Seat belt reminder – distance
100 m / 330 ft
200 m / 660 ft
500 m / 0.31 mls
1000 m / 0.62 mls
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – speed’ to set the speed. (codable in GCSMSEATBELTS)

Seat belt reminder – speed
10 kph / 6 mph
20 kph / 12 mph
30 kph / 19 mph
50 kph / 31 mph
Seat belt reminder is activated after driving the set distance and driving faster than the set speed. Use ‘Seat belt reminder – distance’ to set the distance. (codable in GCSMSEATBELTS)

Seat belt reminder – duration
5s
10s
30s
60s
90s
100s
120s
Duration of seat belt reminder warnings. (codable in GCSMSEATBELTS)

Seat belt reminder – ignition on
on
off
When the ignition is turned on and the driver has not put on his/her seat belt a short seat belt reminder warning is activated. (codable in GCSMSEATBELTS)

Seat belt status display driver
on
off
Display of the seat belt status for the driver (buckled/unbuckled) in the dashboard. (codable in GCSMSEATBELTS)

Seat belt status display passenger
on
off
Display of the seat belt status for the passenger (buckled/unbuckled) in the dashboard. (codable in GCSMSEATBELTS)

Seatbelt Reminder Driver
on
off
Deactivate the driver’s acustic seatbelt reminder. To undo the coding run the backup. (codable in GCSMSEATBELTS)

Seatbelt Reminder Passenger
on
off
Deactivate the passenger’s acustic seatbelt reminder. To undo the coding run the backup. (codable in GCSMSEATBELTS)

Seatbelt Display Reminder Driver
on
off
Deactivate/activate the driver’s optical seatbelt reminder inside KOMBI. (codable in GCSMSEATBELTS)

Seatbelt Display Reminder Passenger
on
off
Deactivate/activate the passenger’s optical seatbelt reminder inside KOMBI. (codable in GCSMSEATBELTS)

Low beams left warning
on
off
Warning for malfunction of Low beams left in the on board computer. (codable in GBDCMAIN)

Low beams right warning
on
off
Warning for malfunction of Low beams right in the on board computer. (codable in GBDCMAIN)

High beams left warning
on
off
Warning for malfunction of High beams left in the on board computer. (codable in GBDCMAIN)

High beams right warning
on
off
Warning for malfunction of High beams right in the on board computer. (codable in GBDCMAIN)

Front fog lights left warning
on
off
Warning for malfunction of Front fog lights left in the on board computer. (codable in GBDCMAIN)

Front fog lights right warning
on
on (alternative)
off
Warning for malfunction of Front fog lights right in the on board computer. (codable in GBDCMAIN)

Daytime running lights left warning
on
on (alternative)
off
Warning for malfunction of Daytime running lights left in the on board computer. (codable in GBDCMAIN)

Daytime running lights right warning
on
on (alternative)
off
Warning for malfunction of Daytime running lights right in the on board computer. (codable in GBDCMAIN)

Turn signals rear left warning
on
on (alternative)
off
Warning for malfunction of Turn signals rear left in the on board computer. (codable in GBDCMAIN)

Turn signals rear right warning
on
on (alternative)
off
Warning for malfunction of Turn signals rear right in the on board computer. (codable in GBDCMAIN)

Standing lights outer rear left warning
on
on (alternative)
off
Warning for malfunction of outer rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights outer rear right warning
on
on (alternative)
off
Warning for malfunction of outer rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear left warning
on
off
Warning for malfunction of inner rear left standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Standing lights inner rear right warning
on
off
Warning for malfunction of inner rear right standing lights in the on board computer. The outer standing lights are on the car itself, the inner ones are on the rear lid (if available). (codable in GBDCMAIN)

Reversing lights left warning
on
on (alternative)
off
Warning for malfunction of left reversing lights in the on board computer. (codable in GBDCMAIN)

Reversing lights right warning
on
off
Warning for malfunction of right reversing lights in the on board computer. (codable in GBDCMAIN)

Rear fog light left warning
on
on (alternative)
off
Warning for malfunction of rear left fog light in the on board computer. (codable in GBDCMAIN)

Rear fog light right warning
on
on (alternative)
off
Warning for malfunction of rear right fog light in the on board computer. (codable in GBDCMAIN)

Brake lights left warning
on
on (alternative)
off
Warning for malfunction of left braking lights in the on board computer. (codable in GBDCMAIN)

Brake lights right warning
on
on (alternative)
off
Warning for malfunction of right braking lights in the on board computer. (codable in GBDCMAIN)

Third brake light warning
on
off
Warning for malfunction of third brake light in the on board computer. (codable in GBDCMAIN)

License plate light warning
on
off
Warning for malfunction of license plate lights in the on board computer. (codable in GBDCMAIN)

Welcome Light
Welcome lights
on
off
Welcome lights are turned on, when vehicle is unlocked. In order for the welcome light to work, the light switch in the car has to be set to ‘Auto’. In some cases, this option also needs to be enabled in the iDrive. In order to customize which lights should be turned on, please use the following options. (codable in GBDCMAIN)

Welcome lights – only when dark
on
off
Welcome lights are only turned on when the rain-light sensor (RLS) recognizes it is dark outside. Only works if rain-light sensor is installed. (codable in GBDCMAIN)

Welcome lights – brightness
off
very low
low
medium
high
very high
Brightness of exterior lights for welcome lights. (codable in GBDCMAIN)

3 series

E36 (1996 - 2000)E46 (1998 - 2007)E9x (2005 - 2013)F3x, F80 (2011 - 2020)G2x (2019 - now)
Alarm System
Anti-Theft Alarm System
on
off
Turn this function on to activate optical and audible confirmations for locking/unlocking the vehicle. (codable in GM5)

Alarm sound
continuous sound
interval sound
Choose between (1) an intermittent sound or (2) a continuous sound for the alarm of the anti-theft alarm system. (codable in GM5)

Alarm sound long
on
off
Alarm sound is extended. (codable in GM5)

Interior space monitoring
on
off
Turn sensor for interior space monitoring on/off. Useful, if pets regularly stay behind in locked vehicle. (codable in GM5)

Tilt sensor for alarm
on
off
Turn tilt sensor for alarm on/off. Useful, if car is regularly parked in duplex garages. (codable in GM5)

Arm/Disarm Anti-Theft Alarm System
With locks and remote
Only with remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote. (codable in GM5)

Comfort Functions
Comfort close using keylocks
on
off
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in GM5)
Interior Lights
Interior lighting soft on/off
on
off
Interior lighting is softly turned on/off. (codable in GM5)
Locking
Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Comfort close using keylocks
on
off
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in GM5)

Opening
Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)
Power Windows
Use windows with open doors
on
off
Windows can be used on an opened door. Only works when ignition is turned on. (codable in GM5)

Power windows after ignition off
on
off
Power windows are active for another minute after ignition is turned off. (codable in GM5)

Turn signals
Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Alarm System
Anti-Theft Alarm System
on
off
Turn this function on to activate optical and audible confirmations for locking/unlocking the vehicle. (codable in GM5)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Alarm sound
interval sound
continuous sound
Choose between (1) an intermittent sound or (2) a continuous sound for the alarm of the anti-theft alarm system. (codable in GM5)

Alarm sound long
on
off
Alarm sound is extended. (codable in GM5)

Alarm with dimmed headlights
on
off
Dimmed headlights blink when alarm is initiated. (codable in GM5)

Alarm with high beams
on
off
High beams blink when alarm is initiated. (codable in GM5)

Alarm with warning lights
on
off
Warning lights blink when alarm is initiated. (codable in GM5)

Interior space monitoring
on
off
Turn sensor for interior space monitoring on/off. Useful, if pets regularly stay behind in locked vehicle. (codable in GM5)

Interior space monitoring rear
on
off
Turn rear sensor for interior space monitoring on/off. Useful, if pets regularly stay behind in locked vehicle. To deactivate the sensor ‘Interior space monitoring’ has to be set to ‘not active’. (codable in GM5)

Tilt sensor for alarm
on
off
Turn tilt sensor for alarm on/off. Useful, if car is regularly parked in duplex garages. (codable in GM5)

Panic alarm
on
off
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on the remote. (codable in GM5)

Unlock with Centerlock button
on
off
In a locked car the driver and passenger door can be unlocked from inside the car by pressing the Centerlock button. After pressing the button the doors can be opened from the inside, but not from the outside. Opening them from the outside will trigger the anti-theft alarm system. To lock the car again, it has to be unlocked by either a remote or a key first. (codable in GM5)

Arm/Disarm Anti-Theft Alarm System
With locks and remote
Only with remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote. (codable in GM5)

Brake lights
Brake force display 1/5
on
off
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. To activate this function, set the other ‘Brake force display’ settings to ‘active’. (codable in LSZ)

Brake force display 2/5
on
off
Only change this function with ‘Brake force display 1/5’. (codable in LSZ)

Brake force display 3/5
on
off
Only change this function with ‘Brake force display 1/5’. (codable in LSZ)

Brake force display 4/5
on
off
Only change this function with ‘Brake force display 1/5’. (codable in LSZ)

Brake force display 5/5
on
off
Only change this function with ‘Brake force display 1/5’. (codable in LSZ)

Brake force display – brake lights
on
off
Customization for brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LSZ)

Brake force display – inner tail lights 1/2
on
off
Customization for inner tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LSZ)

Brake force display – inner tail lights 2/2
on
off
Only change this function with ‘Brake force display – inner tail lights 1/2’. (codable in LSZ)

Brake force display – outer tail lights
on
off
Customization for outer tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in LSZ)

Cleaning
Rain sensor
on
off
Turn rain sensor on/off. (codable in GM5)

Wiping interval
5s
3s
Interval in seconds for windscreen wipers in interval position. (codable in GM5)

Reduce wiping speed on stop
on
off
Reduce wiping speed of windscreen wipers to speed in interval position when vehicle stops. (codable in GM5)

Windscreen wipers continue
on
off
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in GM5)

Wipe delay after windscreen cleaning
0.1s
0.3s
0.5s
0.7s
Windscreen wipers wipe 0.1, 0.3, 0.5 or 0.7 seconds after windscreen is cleaned. (codable in GM5)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in GM5)

No Wiping after windscreen cleaning
on
off
Do not wipe the windscreen after cleaning it. (codable in GM5)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in GM5)

Number until headlight cleaning
3
5
7
9
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in GM5)

Number of splashes for head lights
2
3
Number of splashes for cleaning the head lights. (codable in GM5)

Length of splash for head lights
0.7s
1s
Length of a single splash for head light cleaning. (codable in GM5)

Delay between splashes for head lights
1.3s
1s
Delay between splashes for head light cleaning. (codable in GM5)

Comfort Functions
Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in GM5)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GM5)

Comfort open rear windows using remote
on
off
Rear door windows are also opened during comfort opening with keyfob. (codable in GM5)

Comfort close rear windows using remote
on
off
Rear door windows are also closed during comfort closing with keyfob. (codable in GM5)

Comfort open sunroof using remote
on
off
Sunroof is also opened during comfort opening with keyfob. (codable in GM5)

Comfort close sunroof using remote
on
off
Sunroof is also closed during comfort closing with keyfob. (codable in GM5)

Comfort open for convertible top
on
off
Also open the roof with ‘Comfort open’ function. (codable in GM5)

Coming Home
Follow me home lights duration
off
40s
90s
150s
240s
Duration of follow me home lights in seconds. To activate follow me home lights, activate the flash to pass, while the enginge is off. (codable in LSZ)

Follow me home lights – low beams
on
off
Follow me home lights for low beams are active/not active. (codable in LSZ)

Follow me home lights – brake lights
on
off
Follow me home lights for brake lights are active/not active. (codable in LSZ)

Follow me home lights – turn signals
on
off
Follow me home lights for turn signals are active/not active. (codable in LSZ)

Follow me home lights – high beams
on
off
Follow me home lights for high beams are active/not active. (codable in LSZ)

Follow me home lights – dashboard lights
on
off
Follow me home lights for dashboard instruments are active/not active. (codable in LSZ)

Follow me home lights – number plates
on
off
Follow me home lights for number plates are active/not active. (codable in LSZ)

Follow me home lights – fog lights front
on
off
Follow me home lights for fog lights front are active/not active. (codable in LSZ)

Follow me home lights – park lights front
on
off
Follow me home lights for parking lights front are active/not active. (codable in LSZ)

Follow me home lights – park lights rear
on
off
Follow me home lights for parking lights rear are active/not active. (codable in LSZ)

Follow me home lights – park lights rear addition
on
off
Follow me home lights for parking lights rear are active/not active. Activate in addition to ‘Follow me home lights – parking lights rear’. (codable in LSZ)

Convertible
Comfort open for convertible top
on
off
Also open the roof with ‘Comfort open’ function. (codable in GM5)
Daytime Running Lights
Daytime running lights 2/2
on
off
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 1/2’ as well. (codable in LSZ)

Daytime running lights 1/2
on
off
Daytime running lights (DRL) is active/not active. The DRL is activated when the light switch is set to position ‘0’ in the car. Please activate ‘Daytime running lights 2/2’ as well. (codable in LSZ)

Daytime running lights
on
off
Daytime running lights on light switch position ‘0’ is active/not active. (codable in LSZ)

Daytime running lights brightness
off
very low
low
medium
high
very high
Brightness for dimmed daytime running lights. To use this function, also activate ‘Daytime running lights customization’. (codable in LSZ)

Daytime running lights – dimmed high beams
on
off
Use dimmed high beams as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LSZ)

Daytime running lights – front turn signals
on
off
Use front turn signals as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LSZ)

Daytime running lights – standing lights
on
off
Use standing lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LSZ)

Daytime running lights – tail lights
on
off
Use tail lights as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’. (codable in LSZ)

Easy Entry
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GM5)

Easy entry Key 1
on
off
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 2
on
off
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 3
on
off
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 4
on
off
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Delay easy entry
no delay
3s
4s
5s
6s
7s
8s
9s
10s
Delay for easy entry function. (codable in GM5)

Flash to Pass
Flash to pass with bi-xenon
on
off
Bi-xenon lamps are used for flash to pass. (codable in LSZ)
Headlight Cleaning
Head light cleaning
on
off
Turn head light cleaning on/off. (codable in GM5)

Number until headlight cleaning
3
5
7
9
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in GM5)

Number of splashes for head lights
2
3
Number of splashes for cleaning the head lights. (codable in GM5)

Length of splash for head lights
0.7s
1s
Length of a single splash for head light cleaning. (codable in GM5)

Delay between splashes for head lights
1.3s
1s
Delay between splashes for head light cleaning. (codable in GM5)

High Beam
Front fog lights with high beams
on
off
Front fog lights are automatically turned off when activating high beams. (codable in LSZ)
Interior Lights
Turn off interior lighting after x seconds
0s
5s
15s
20s
Turn interior lighting off after 0, 5, 15 or 20 seconds. (codable in GM5)

Interior lighting after ignition off
on
off
Interior lighting is turned on, when head lights are turned on and ignition is turned off. (codable in GM5)

Interior lighting with parking lights
on
off
Interior lighting is turned on for one minute when parking lights are active. (codable in GM5)

Interior lighting after unlock
on
off
Interior lighting is turned on, when vehicle locks are unlocked with the key. (codable in GM5)

Interior lighting soft on/off
on
off
Interior lighting is softly turned on/off. (codable in GM5)

Interior lighting turn on with remote
on
off
Interior lighting is turned on by pressing the unlock button on the remote a second time after unlocking the car. (codable in GM5)

Locking
Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Audible confirmation after complete closing
on
off
Audible confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation – (un)locking vehicle
on
off
Optical confirmation for locking/unlocking vehicle is active/not active. (codable in GM5)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in GM5)

Comfort close rear windows using remote
on
off
Rear door windows are also closed during comfort closing with keyfob. (codable in GM5)

Comfort close sunroof using remote
on
off
Sunroof is also closed during comfort closing with keyfob. (codable in GM5)

Automatically lock vehicle
on
off
If no door or window has been opened two minutes after the car has been unlocked, the doors automatically lock. (codable in GM5)

Threshold speed for vehicle locking
on ignition
4 kph / 2 mph
8 kph / 5 mph
12 kph / 8 mph
16 kph / 10 mph
20 kph / 12 mph
24 kph / 15 mph
28 kph / 17 mph
Sets the speed at which the vehicle automatically locks all doors.nTo activate this function you need to activate ‘Lock vehicle at x kph’ for the according keys. (codable in GM5)

Lock vehicle at x kph
on
off
Automatically lock the vehicle at the set threshold speed. (codable in GM5)

Lock vehicle at x kph Key 1
on
off
Automatically lock the vehicle at the set threshold speed when key 1 is used. (codable in GM5)

Lock vehicle at x kph Key 2
on
off
Automatically lock the vehicle at the set threshold speed when key 2 is used. (codable in GM5)

Lock vehicle at x kph Key 3
on
off
Automatically lock the vehicle at the set threshold speed when key 3 is used. (codable in GM5)

Lock vehicle at x kph Key 4
on
off
Automatically lock the vehicle at the set threshold speed when key 4 is used. (codable in GM5)

Lock tailgate when vehicle is locked
on
off
Tailgate cannot be unlocked if the vehicle is locked. (codable in GM5)

Mirrors
Comfort fold/unfold for mirrors 1/3
on
off
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. In order to activate this function, set the other two settings to ‘active’. (codable in GM5)

Comfort fold/unfold for mirrors 2/3
on
off
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. In order to activate this function, set the other two settings to ‘active’. (codable in GM5)

Comfort fold/unfold for mirrors 3/3
on
off
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. In order to activate this function, set the other two settings to ‘active’. (codable in GM5)

Opening
Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation – (un)locking vehicle
on
off
Optical confirmation for locking/unlocking vehicle is active/not active. (codable in GM5)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in GM5)

Comfort open rear windows using remote
on
off
Rear door windows are also opened during comfort opening with keyfob. (codable in GM5)

Comfort open sunroof using remote
on
off
Sunroof is also opened during comfort opening with keyfob. (codable in GM5)

Comfort open for convertible top
on
off
Also open the roof with ‘Comfort open’ function. (codable in GM5)

Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GM5)

Easy entry Key 1
on
off
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 2
on
off
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 3
on
off
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 4
on
off
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Selective central locking
on
off
Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in GM5)

Selective central locking Key 1
on
off
Separate setting for ‘Selective central locking’ for key 1nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in GM5)

Selective central locking Key 2
on
off
Separate setting for ‘Selective central locking’ for key 2nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in GM5)

Selective central locking Key 3
on
off
Separate setting for ‘Selective central locking’ for key 3nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in GM5)

Selective central locking Key 4
on
off
Separate setting for ‘Selective central locking’ for key 4nUnlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, too. (codable in GM5)

Secondary unlock
off
Selective central locking
Easy entry
Selective central locking’: Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, toon’Easy entry’: Press the unlock button once to unlock all doors. Press it again to lower the driver side windown’not active’: Second unlock does nothing. (codable in GM5)

Secondary unlock remote 1
off
Selective central locking
Easy entry
Customize ‘Secondary unlock’ function of remote 1n’Selective central locking’: Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, toon’Easy entry’: Press the unlock button once to unlock all doors. Press it again to lower the driver side windown’not active’: Second unlock does nothing. (codable in GM5)

Secondary unlock remote 2
off
Selective central locking
Easy entry
Customize ‘Secondary unlock’ function of remote 2n’Selective central locking’: Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, toon’Easy entry’: Press the unlock button once to unlock all doors. Press it again to lower the driver side windown’not active’: Second unlock does nothing. (codable in GM5)

Secondary unlock remote 3
off
Selective central locking
Easy entry
Customize ‘Secondary unlock’ function of remote 3n’Selective central locking’: Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, toon’Easy entry’: Press the unlock button once to unlock all doors. Press it again to lower the driver side windown’not active’: Second unlock does nothing. (codable in GM5)

Secondary unlock remote 4
off
Selective central locking
Easy entry
Customize ‘Secondary unlock’ function of remote 4n’Selective central locking’: Unlocking the car once only unlocks the driver’s door. Unlocking it again unlocks the other doors, toon’Easy entry’: Press the unlock button once to unlock all doors. Press it again to lower the driver side windown’not active’: Second unlock does nothing. (codable in GM5)

Delay easy entry
no delay
3s
4s
5s
6s
7s
8s
9s
10s
Delay for easy entry function. (codable in GM5)

Automatic seat adjustment
after unlocking with remote
after unlocking and opening the door
off
Seat automatically adjusts (1) after unlocking the car, (2) after unlocking and opening the door or (3) seat does not adjust automatically. (codable in SM)

Power Windows
Easy entry
on
off
If the car is unlocked by pressing the unlock button twice, the driver window will lower as soon as the door is opened. (codable in GM5)

Easy entry Key 1
on
off
Separate setting for ‘Easy entry’ for key 1nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 2
on
off
Separate setting for ‘Easy entry’ for key 2nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 3
on
off
Separate setting for ‘Easy entry’ for key 3nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Easy entry Key 4
on
off
Separate setting for ‘Easy entry’ for key 4nPress the unlock button once to unlock all doors. Press it again to lower the driver side window. (codable in GM5)

Delay easy entry
no delay
3s
4s
5s
6s
7s
8s
9s
10s
Delay for easy entry function. (codable in GM5)

Window tip function driver door 1/2
on
off
Driver door window fully opens by tapping the window switch. (codable in GM5)

Window tip function driver door 2/2
on
off
Driver door window fully closes by tapping the window switch. (codable in GM5)

Window tip function passenger door 1/2
on
off
Passenger door window fully opens by tapping the window switch. (codable in GM5)

Window tip function passenger door 2/2
on
off
Passenger door window fully closes by tapping the window switch. (codable in GM5)

Window tip function rear doors 1/2
on
off
Rear door windows fully open by tapping the window switch. Does not work on Cabriolets. (codable in GM5)

Window tip function rear doors 2/2
on
off
Rear door windows fully close by tapping the window switch. Does not work on Cabriolets. (codable in GM5)

Window tip function central switch 1/2
on
off
All windows fully open by tapping the central window switch. Does not work on Cabriolets. (codable in GM5)

Window tip function central switch 2/2
on
off
All windows fully close by tapping the central window switch. Does not work on Cabriolets. (codable in GM5)

Use windows with open doors
on
off
Windows can be used on an opened door. Only works when ignition is turned on. (codable in GM5)

Windows continue
on
off
When the door is opened while its window is opening/closing, the window will continue opening/closing the window. (codable in GM5)

Lock windows while hood in motion
0s (standard)
30s
60s
Lock windows for 0, 30 or 60 seconds when hood is opened/closed. (codable in GM5)

Lower windows when opening hood
on
off
Lower windows when hood is opened. (codable in GM5)

Power windows after ignition off
on
off
Power windows are active for another minute after ignition is turned off. (codable in GM5)

Sidemarker
Sidemarker (US)
on
off
Sidemarkers are permanently active. May need additional ‘Sidemarker (US)’ functions set to ‘active’ if available. If warnings for the turn signals are shown after successfully coding this, please disable the voltage monitoring for the turn signals. This warning is most likely due to the fact that your car is not a US model. (codable in LSZ)

Sidemarker (US) – turn signals
on
off
Use dimmed turn signals as sidemarkers. In order to enable this option, activate ‘Sidemarker (US)’ as well. (codable in LSZ)

Sidemarker (US) – brake lights
on
off
Use dimmed brake lights as sidemarkers. In order to enable this option, activate ‘Sidemarker (US)’ as well. (codable in LSZ)

Tail gate/Rear lid
Lock tailgate when vehicle is locked
on
off
Tailgate cannot be unlocked if the vehicle is locked. (codable in GM5)

Unlock tailgate
press 1x
press 2x
with delay
Tailgate is unlocked (1) after pressing the ‘unlock tailgate’ button on the remote once, (2) after pressing it twice or (3) after a short delay. (codable in GM5)

Delay tailgate unlock
off
0.2s
0.8s
1.6s
0.4s
Unlocking the tailgate is delayed by 0.2, 0.4, 0.8 or 1.6 seconds. (codable in GM5)

Unlock rear window with footwell switch
on
off
Footwell switch opens rear window instead of trunk lid in touring models. (codable in GM5)

Unlock rear window key 1
on
off
Key 1 unlocks rear window instead of trunk lid in touring models. (codable in GM5)

Unlock rear window key 2
on
off
Key 2 unlocks rear window instead of trunk lid in touring models. (codable in GM5)

Unlock rear window key 3
on
off
Key 3 unlocks rear window instead of trunk lid in touring models. (codable in GM5)

Unlock rear window key 4
on
off
Key 4 unlocks rear window instead of trunk lid in touring models. (codable in GM5)

Turn signals
Optical confirmation – unlocking vehicle
on
off
Optical confirmation for unlocking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation – locking vehicle
on
off
Optical confirmation for locking vehicle is active/not active. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation after complete closing
on
off
Optical confirmation for locking vehicle is active/not active. Confirmation will occur after every door and the tailgate are closed. Only works if ‘Anti Theft System’ is set to ‘active’. (codable in GM5)

Optical confirmation – (un)locking vehicle
on
off
Optical confirmation for locking/unlocking vehicle is active/not active. (codable in GM5)

One-touch turn signal function
one time
three times
Number of turn signals when tapping the turn signal. In some cases, this option also needs to be enabled in the iDrive. This coding has been introduced ca. late 2004 for the 3 series (E46). On some older cars this might be able to be coded after a software update of the LSZ module in the dealership. (codable in LSZ)

Hazard lights
standard
double
Hazard lights blink once or twice. (codable in LSZ)

Crash lights
standard
double
Hazard lights blink once or twice upon an accident. (codable in LSZ)

Voltage Monitoring
Angel Eyes left voltage monit. 1/2
on
off
Voltage monitoring for angel eyes/standing lights front left. Might cause flickering of LED lights. (codable in LSZ)

Angel Eyes left voltage monit. 2/2
on
off
Deactivate with ‘Angel Eyes left voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Angel Eyes right voltage monit. 1/2
on
off
Voltage monitoring for angel eyes/standing lights front right. Might cause flickering of LED lights. (codable in LSZ)

Angel Eyes right voltage monit. 2/2
on
off
Deactivate with ‘Angel Eyes right voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Angel Eyes voltage monit.
on
off
Voltage monitoring for angel eyes/standing lights front. Might cause flickering of LED lights. (codable in LSZ)

Turn signals front voltage monit. 1/2
on
off
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in LSZ)

Turn signals front voltage monit. 2/2
on
off
Deactivate with ‘Turn signals front voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Sidemarker voltage monit. 1/2
on
off
Voltage monitoring for sidemarkers. Might cause flickering of LED lights. (codable in LSZ)

Sidemarker voltage monit. 2/2
on
off
Deactivate with ‘Sidemarker voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

High beams voltage monit. 1/2
on
off
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in LSZ)

High beams voltage monit. 2/2
on
off
Deactivate with ‘High beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

High beams voltage monit.
on
off
Voltage monitoring for high beams. Might cause flickering of LED lights. (codable in LSZ)

Low beams voltage monit. 1/2
on
off
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in LSZ)

Low beams voltage monit. 2/2
on
off
Deactivate with ‘Low beams voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Low beams voltage monit.
on
off
Voltage monitoring for low beams. Might cause flickering of LED lights. (codable in LSZ)

Turn signals rear voltage monit. 1/2
on
off
Voltage monitoring for turn signals rear. Might cause flickering of LED lights. (codable in LSZ)

Turn signals rear voltage monit. 2/2
on
off
Deactivate with ‘Turn signals rear voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Turn signals front voltage monit.
on
off
Voltage monitoring for turn signals front. Might cause flickering of LED lights. (codable in LSZ)

Braking lights voltage monit. 1/2
on
off
Voltage monitoring for braking lights. Might cause flickering of LED lights. (codable in LSZ)

Braking lights voltage monit. 2/2
on
off
Deactivate with ‘Braking lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Inner brake light voltage monit. 1/2
on
off
Voltage monitoring for inner brake light. Might cause flickering of LED lights. (codable in LSZ)

Inner brake light voltage monit. 2/2
on
off
Deactivate with ‘Inner brake light voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Tail lights left voltage monit. 1/2
on
off
Voltage monitoring for tail lights left. Might cause flickering of LED lights. (codable in LSZ)

Tail lights left voltage monit. 2/2
on
off
Deactivate with ‘Tail lights left voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Tail lights right voltage monit. 1/2
on
off
Voltage monitoring for tail lights right Might cause flickering of LED lights. (codable in LSZ)

Tail lights right voltage monit. 2/2
on
off
Deactivate with ‘Tail lights right voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Tail lights voltage monit.
on
off
Voltage monitoring for tail lights. Might cause flickering of LED lights. (codable in LSZ)

Reversing lights voltage monit.
on
off
Voltage monitoring for reversing lights. Might cause flickering of LED lights. (codable in LSZ)

Park lights rear left voltage monit.
on
off
Voltage monitoring for park lights rear left. Might cause flickering of LED lights. (codable in LSZ)

Park lights rear right voltage monit.
on
off
Voltage monitoring for park lights rear right Might cause flickering of LED lights. (codable in LSZ)

License plate lighting voltage monit. 1/2
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in LSZ)

License plate lighting voltage monit. 2/2
on
off
Deactivate with ‘License plate lighting voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

License plate lighting voltage monit.
on
off
Voltage monitoring for license plate lighting. Might cause flickering of LED lights. (codable in LSZ)

Rear fog lights voltage monit. 1/2
on
off
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in LSZ)

Rear fog lights voltage monit. 2/2
on
off
Deactivate with ‘Rear fog lights voltage monit. 1/2’ to disable flickering of LED lights. (codable in LSZ)

Rear fog lights voltage monit.
on
off
Voltage monitoring for rear fog lights. Might cause flickering of LED lights. (codable in LSZ)

Alarm System
Panic alarm with remote
active
off
Press and hold the ‘unlock trunk’ button to trigger the alarm. To activate this function, also activate ‘Panic alarm’ in the DWA module. (codable in CAS)

Arm/Disarm Anti-Theft Alarm System
Only with remote
With locks and remote
Anti-theft alarm system is armed/disarmed by locking/unlocking the car (1) with the locks and the remote or (2) only by locking/unlocking the car with the remote. (codable in CAS)

Panic alarm
on
off
Trigger alarm by pressing and holding the ‘unlock tailgate’ button on the remote. To activate this function also activate ‘Panic alarm with remote’ in the CAS module. (codable in DWA)

Audible confirmation – locking vehicle
on
off
Audible confirmation for locking vehicle is active/not active. (codable in DWA)

Audible confirmation – unlocking vehicle
on
off
Audible confirmation for unlocking vehicle is active/not active. (codable in DWA)

Alarm with dimmed headlights
on
off
Dimmed headlights blink when alarm is initiated. (codable in DWA)

Alarm with high beams
on
off
High beams blink when alarm is initiated. (codable in DWA)

Alarm with warning lights
on
off
Warning lights blink when alarm is initiated. (codable in DWA)

Alarm type
Europe
USA
UK
Type and sound of the alarm. United Kingdom is the same sound as Europe, the duration of the alarm is eight times longer. (codable in DWAS)

Audible confirmation
on
off
Enable menus for audible confirmation for locking/unlocking the vehicle in the iDrive. The menu can be found in the same menu as the other locking confirmation settings in the iDrive. Only works if an ‘Anti Theft Alarm System’ is installed, because the sound is generated by the siren of the anti theft alarm system and not by the horn. If you are not sure, whether an ‘Anti Theft Alarm System’ or only the standard ‘Anti Theft Protection’ is installed, please perform a diagnostic session. You can then check if the module for the anti theft alarm system was found or not. (codable in CCC)

Audible confirmation – unlocking vehicle
on
off
Display option for audible confirmation for unlocking the vehicle in the iDrive. Please enable ‘Audible confirmation’ for this as well in this module and carefully read the description for it. (codable in CCC)

Audible confirmation – locking vehicle 1/2
on
off
Display option for audible confirmation for locking the vehicle in the iDrive. Please enable ‘Audible confirmation’ for this as well in this module and carefully read the description for it. (codable in CCC)

Audible confirmation – locking vehicle 2/2
on
off
Only change this function with ‘Audible confirmation – locking vehicle 1/2’. (codable in CCC)

Angel Eyes
Daytime running lights – angel eyes
on
off
Use angel eyes as daytime running lights. To activate this function, set ‘Daytime running lights’ to ‘active’ and ‘Daytime running lights – customization’ to ‘Only additional lights’. If you want to increase the brightness, please use ’Daytime running lights – angel eyes brightness’. This coding is only available for cars with an FRM2 or FRM3. These FRM versions started to be installed after ca. 06/2007 in the 3 series (E9x). (codable in FRM)

Angel eyes brightness daytime running lights
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes (Corona rings) for daytime running lights. (codable in FRM)

Angel eyes brightness standing lights
off
very low
low
medium
high
very high
Brightness of Angel Eyes (Corona rings) for standing lights. (codable in FRM)

Angel eyes brightness parking lights
off
very low
low
medium
high
very high
Brightness of Angel Eyes (Corona rings) for parking lights. (codable in FRM)

Brightness of Angel Eyes 1 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes. Only use this coding if the standard codings did not work. (codable in FRM)

Brightness of Angel Eyes 2 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)

Brightness of Angel Eyes 3 – alternative
off
very low
low
rather low
medium
rather high
high
very high
Brightness of Angel Eyes when low beams are active. Only use this coding if the standard codings did not work. (codable in FRM)

Brake lights
Brake force display
on
off
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. (codable in FRM)

Brake force display 1/2
on
on (alternative)
Customized brake lights turn on or flash when braking hard. Use the codings below to customize the brake force display. To activate this function, set ‘Brake force display 2/2’ to ‘active’. (codable in FRM)

Brake force display 2/2
on
on (alternative)
off
Only change this function with ‘Brake force display 1/2’. (codable in FRM)

Brake force display – minimum speed
20 kph / 12 mph
50 kph / 31 mph
Minimum speed threshold for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – blinking speed
slow
fast
Blinking speed for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – angel eyes
off
on
flashing
Customization for angel eyes for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – outer brake lights
off
on
flashing
Customization for outer brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – inner brake lights
on
flashing
Customization for inner brake lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – third brake light
off
on
flashing
Customization for third brake lights (rear window) for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – tail lights
off
on
flashing
Customization for tail lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Brake force display – rear fog lights
off
on
flashing
Customization for rear fog lights for brake force display. In order to enable this option, activate ‘Brake force display’ as well. (codable in FRM)

Cleaning
Wiping interval standstill
3s
5s
Interval in seconds for windscreen wipers at standstill. (codable in JBBF)

Wiping interval rear window
off
2s
4s
6s
8s
12s
Interval in seconds for windscreen rear window wipers. (codable in JBBF)

Rear wiper in reverse gear
on
off
Rear wiper automatically turns on in reverse gear when front wipers are active. (codable in JBBF)

Windscreen wipers continue
on
off
Windscreen wipers don’t stop in the middle of the windscreen when ignition is turned off. Instead they complete their wiping cycle. (codable in JBBF)

Wipe delay after windowscreen cleaning
0.1s
0.3s
0.5s
0.7s
Windscreen wipers wipe 0.x seconds after windscreen is cleaned. (codable in JBBF)

Wipe delay after rear window cleaning
0.1s
0.3s
0.5s
0.7s
Rear window wipers wipe 0.x seconds after rear window is cleaned. (codable in JBBF)

Number of wipes after windscreen cleaning
1
2
3
4
Number of wipes after windscreen is cleaned. (codable in JBBF)

Number of wipes after rear window cleaning
1
2
3
4
Number of wipes after rear window is cleaned. (codable in JBBF)

Head light cleaning
on
off
Turn head light cleaning on/off. (codable in JBBF)

Number until headlight cleaning
3
5
7
Head lights are cleaned every x-th time the windscreen washer has been activated. (codable in JBBF)

Number of splashes for head lights
2
3
Number of splashes for cleaning the head lights. (codable in JBBF)

Length of splash for head lights
0.7s
1s
0.5s
Length of a single splash for head light cleaning. (codable in JBBF)

Delay between splashes for head lights
1.3s
1s
1.5s
Delay between splashes for head light cleaning. (codable in JBBF)

Clock/Date
GPS time correction
on
off
Time of day is corrected by using GPS. (codable in KOMBI)
Comfort Functions
Comfort start
on
off
Ignition key just has to be tapped once to start the engine after ignition is turned on. (codable in CAS)

Comfort eject
on
off
Turn off the ignition with a long press on the start/stop button in order to eject the ignition key. (codable in CAS)

Comfort open using remote
on
off
Press and hold the unlock button on the remote to open all windows and the sunroof. (codable in CAS)

Comfort close using remote
on
off
Press and hold the lock button on the remote to close all windows and the sunroof. (codable in CAS)

Comfort open using keylocks
on
off
Unlock the car by key and hold the key in the unlock position to open all windows and the sunroof. (codable in CAS)

Comfort close using keylocks
on
off
Lock the car by key and hold the key in the lock position to close all windows and the sunroof. (codable in CAS)

Comfort close – door (comfort access)
on
off
Use comfort closing features when locking with the door handle. This only works if comfort access is installed. Touch the locking area on the door handle for a longer time to close all windows and the sunroof. (codable in CAS)

Comfort folding for sideview mirrors
on
off
When holding the lock/unlock button on the remote the sideview mirrors automatically fold/unfold. To activate this function please activate ‘Comfort folding/unfolding for sideview mirrors’ in the ‘FRM’ module. Also activate ‘Comfort open using remote’ and ‘Comfort close using remote’ in this module. (codable in CAS)

Comfort closing delay (mirrors)
0.0s
0.5s
1.5s
General delay for comfort closing. If ‘0.0s’ is set, mirrors fold immediately when car is locked. (codable in CAS)

Deactivate comfort access
on
off
In order to deactivate the comfort access, set this coding to ‘not active’. This coding cannot be used to activate a retrofitted comfort access. When the comfort access is deactivated, neither closing nor opening the car via the door handle will work. Turning the ignition and engine on/off without putting the key into the ignition (also known as ‘Keyless Go’) will also not work anymore. Therefore the car cannot be stolen a