How To Read the Error Memory of your Škoda Karoq – Easy Guide

GAIN MORE CONTROL OF YOUR CAR WITH THE CARLY FEATURES

Check the exact pricing of Carly for your car brand.

Every car owner of a current vehicle should know how to easily read the error memory of their Škoda Karoq.

The error memory represents a storage component in the overall vehicle system that records all defects and malfunctions of your car and stores them as errors.

Being able to read the error memory of your vehicle will let you:

  • Know the current fault codes in your vehicle and clear them on your own – without relying on a mechanic
  • Understand if your car must be taken to the mechanic or not
  • Know the health state of your vehicle at all times and prevent unexpected repair fees

The best part is that you can do all of this very easily and quickly on your own. All you need is your own OBD2 scanner, which is very affordable and simple to utilize.

Below we will show you the different ways to read out the Škoda Karoq fault memory.

So, how to read the error memory of your Škoda Karoq?

There are various ways to read out the fault memory on a Škoda Karoq, including a visit to the mechanic.

However, if you have decided to read the memory of your Škoda Karoq on your own, you will want to use an fast tool!

Choosing the right one highly depends on whether you just want to read and clear the error memory, or access even more tools. For example, these can be:

An easy and convinient tool: OBD2 Scanner

There are various diagnostic tools that you can use to read the error memory and also access more features, such as the ones mentioned above. However, we will focus on using an OBD2 scanner since they are one of the easiest and most convenient diagnostic tools.

how to read the error memory

An OBD2 Scanner is pocket-sized tool that lets you access all of your vehicle’s information. This way you no longer need to fully rely on a car mechanic to know more about your vehicle.

To read out the error memory with an OBD2 scanner, no prior knowledge is required and it can be read out in a few minutes. Afterwards, you only need your phone in order to easily see all of the information on a mobile app.

Moreover, the steps on how to use an OBD2 scanner are easy. Just plug the OBD2 scanner into your car’s OBD2 port, connect it via Bluetooth to your phone, and open the mobile app to see all the data.

Since the OBD2 scanner can connect to your phone via Bluetooth, there is not additional equipment or software required. All it takes is this small device and your phone!

Most OBD2 scanners will let you read and clear fault codes from your phone. However, scanners such as the Carly OBD2 scanner will let you do much more than just that!

The range of functions of the Carly App is large that you can do more than only reading the error memory on your Škoda Karoq. The best thing to do is download the free Carly Lite version and see for yourself everything that you can do with your Škoda Karoq.

The requirements that your Škoda Karoq must meet to use an OBD2 scanner are simple!

The only thing you should make sure is that the chosen scanner is compatible with your Škoda Karoq model.

To understand why its the model of your vehicle is important, we will get a little bit technical here but we’ll make sure to make it easy to understand!

In order to be able to read out the error memory of a Škoda Karoq an OBD2 interface is needed. “OBD2” stands for an on-board diagnostic system, which automatically checks the functionality of all relevant components and vehicle systems.

The OBD2 system is an interface that already comes installed in the car when its being manufactured. It which monitors all important processes and checks them at regular intervals.

Because it is very hard even for mechanics to monitor every interaction of existing sensors or control units, it is necessary that a automobile has such a controlled system.

Moreover, within the scope of OBD2 diagnostics, errors in the control units are found and then automatically stored in the memory of the vehicle in the form of a four-digit code.

The installation of an OBD2 system has been mandatory for all manufacturers since the year 2001 (gasoline) and 2004 (diesel). So, if your Škoda Karoq was manufactured after the OBD2-introduction, you have nothing to worry about!

However, if your Škoda Karoq is older and does not have an OBD2, checking the error memory much more difficult. You might need an additional connector in order to use the Carly OBD2 scanner or any other scanner.

Where is the OBD2 port in your Škoda Karoq

If you have already verified that your Škoda Karoq is compatible with the OBD2 scanner you’ve chosen the next step involves looking for the OBD2 port.

The OBD2 port usually located within a meter around the center console. So it is fairly easy to find it. In most vehicles, the port is located around the driver seat. In some cars it can be found under the dashboard, the ash tray, under the steering wheel, or to the left of the driving pedals.

If you can’t locate the OBD2 port, you can take a look at your car’s manual.

Is it worth it to know how to read the error memory of your Škoda Karoq?

We know that there are easy ways to read the fault memory of a Škoda Karoq. However, is it really worth the cost and effort to read the memory yourself? Or is it perhaps easier to just contact a repair shop after all?

Reading out the error memory on your own

obd scanner

If you do the readout of the memory yourself, you will only have to do a one time payment for the diagnostic tool, which can cost around $80 in the case of the Carly Scanner.

There are other devices that can be cheaper or more expensive. With the cheaper devices you usually have to purchase many add ons or the quality will not be good. With the expensive scanners, you will get professional equipment however it can be extremely complex and very challenging to use if you are not a car expert.

However, with the Carly Scanner you can get many advanced functionalities that professional tools have for a much lower price and great quality.

Once you have your own Carly Scanner, you can use it for its entire lifetime! The only time where you could spend more is if new features are released on the mobile app and you want to access them.

Nevertheless, the price that you would spend in your own tool might be cheaper than one visit to the mechanic. And now imagine how much more you can save since you can use your scanner as many times as you want!

Reading out the error memory at the mechanic shop

diagnostic device BMW x1 f48

If you visit a workshop with your Škoda Karoq, just the reading of the error memory can be priced between $25 and $60, depending on the respective workshop.

However, you will have to pay this price everytime what you want to take your car to a mechanic for a revision.

Therefore, it can get very pricy if you only rely on the mechanic to check the health state of your Škoda Karoq.

Knowing how to read the error memory of your Škoda Karoq can save you up to $2,000 per year. You can avoid unexpected repair bills and also save on maintenance that you would get charged for.

How often should you read out the memory of your Škoda Karoq?

Generally there is no official interval to check the error memory of your Škoda Karoq. However, in order to benefit from your OBD2 scanner and your vehicle, you should set a fitting period. For example, once per year quarter.

This is the only way to detect harmless malfunctions or defects in time before they develop into larger problems, which then really cost money at the workshop or cause further damages.

However, the error memory should be read out at the latest when the yellow lamps light up on your dashboard.

When do you actually need to visit a car mechanic?

Even if you can evaluate the fault memory of your Škoda Karoq, you cannot always perform everything yourself. For example, complex engine repairs.

Additionally, if do not feel confident in carrying out your own maintenance, you can always ask help for a mechanic.

You should in any case refrain from clearing the error codes before visiting a workshop, unless you are completelysure that the stored error messages cannot cause serious damage.

Finally, if your car is presenting abnormal behavior such as smoke, shaking, and noises, you should take your car as soon as possible to the mechanic and/or call a tow truck.

Keep in mind, that every car has different software and modules built-in. Therefore specific features will vary with every model.


Related Posts

Need to read engine codes but not sure where to start? This article delivers the essentials. You’ll learn how to interpret those

Do you already know which vehicle component is hidden behind the term fault memory? Are you guys familiar with the different diagnostic

If you have already decided in principle to purchase an OBD2 diagnostic device in order to be able to detect possible errors

Volkswagen readout devices are now offered in almost all colors and shapes. Volkswagen readout devices can now be purchased in any accessories

The device that every car owner needs.

Ready to have complete control over your car’s functioning and health monitoring? Your OBD2 scanner is waiting for you!