Carly Community
vivienschulz1
350Z Transmission Limp Mode
4 comment(s)
vivienschulz1 (Author)
Yeah, I wiggled the connector a bit, but didn't see anything obvious. You mean the one on the radiator? Was it visibly damaged when you had the problem?
isabellschwarz1
Yep, that's the one. It wasn't visibly damaged in my case, but the connection was loose and corroded. It might be worth cleaning the contacts and making sure it's properly seated. However, considering your other symptoms, I’d advise you to let a workshop check it out.
vivienschulz1 (Author)
Roger that. Cleaned the connector, no dice. Bit the bullet and took it to the shop. Turns out it was a faulty pressure sensor and a bad connection, like we thought. New sensor, wiring cleaned up, and it cost me 95€ Thanks for pointing me in the right direction!
Join the discussion now:
isabellschwarz1
Sounds familiar. I had similar symptoms with my 350Z. Transmission acting up, lights on... Have you checked the pressure sensor connection? I remember that being a potential culprit.