lennystorm10
Auris diesel engine stalling
Summary of the thread
A 2013 Toyota Auris diesel was experiencing engine stalling and a check engine light, with error codes stored in the memory. The initial suspicion was a bad cable or plug connection. After a technician's inspection, the issue was identified as a defective cable connection to the fuel pressure regulator. The cable was replaced and recalibrated, resolving the problem and restoring the engine's performance.
Did this summary help you solve your problem?
4 comment(s)
lennystorm10 (community.author)
Thanks for the info. Where was the fuel composition sensor located in the Opel Insignia's engine bay? Do you remember the specific error codes it triggered? This would help me compare with the Toyota Auris's diagnostic framework.
sophiakoehler8
I don't remember the exact location on the Insignia. A workshop did the repair. But I recall the error codes were for 'fuel mixture malfunction' and 'sensor circuit range/performance'. Given the similarities, get a technician to do a diagnostic check. It could be a bad sensor or a wiring issue. Rule out the simple things first before getting into more complex repairs.
lennystorm10 (community.author)
Thanks for the advice. I had a technician inspect the Auris. It was a defective cable connection to the fuel pressure regulator. The repair was 95€ for cable replacement and recalibration. The engine runs perfectly now. Thanks again for your help.
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
TOYOTA
community_crosslink_rmh_model
AURIS
sophiakoehler8
I had something similar with my Opel Insignia, but it was a petrol engine. It sounds like a faulty fuel composition sensor sending bad data to the ECU. The engine would try to compensate with incorrect fuel adjustments, which caused engine knock and stalling. Check the sensor readings with a live data stream to see if they're accurate. Also, check the fuel filter because a clogged filter can cause mixture problems.