sinatiger1
Barchetta Windshield Wipers Not Working
Summary of the thread
The windshield wipers on a 2000 Fiat Barchetta have stopped working entirely, with an error related to the wiper system detected by an OBD scanner. The issue might be due to a defective cable or plug connection in the circuit. Suggested solutions include checking all connections, especially ground connections, for corrosion or damage, and inspecting the wiper motor itself. If these checks don't resolve the problem, visiting a workshop might be necessary.
Did this summary help you solve your problem?
4 comment(s)
sinatiger1 (community.author)
Thanks for the tip! Where exactly was that corroded connector located in your Astra? Was it easy to access? And yes, I did check the wiper motor fuse, and it seems to be okay. But I didn't check the motor itself directly.
patriciaschneider4
Unfortunately, I do not recall the exact location. As I recall, the connector was difficult to reach. If the fuse is ok and you checked the obvious connections, I would consider visiting a workshop. It would cost approximately 95€.
sinatiger1 (community.author)
Thanks for the info! I was hoping to avoid the workshop, but it sounds like that might be the best course of action. I will let you know if I get it solved.
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
FIAT
community_crosslink_rmh_model
BARCHETTA
patriciaschneider4
I had a similar issue with my old Opel Astra a while back. The wipers would fail intermittently. In my case, it turned out to be a corroded connector in the wiring harness near the wiper motor. Check all the connections, especially the ground connections, and look for any signs of corrosion or damage. Also, have you checked the wiper motor itself?