paulakrause5

Bipper gearbox slipping

Hey, I'm having some trouble with my 2013 Peugeot Bipper, gasoline engine, at nearly 200,000 km. The gearbox is slipping, and the shifts just aren't clean. I'm suspecting a transfer case oil issue, maybe wear? Has anyone had similar problems?

A 2013 Peugeot Bipper with nearly 200,000 km is experiencing gearbox slipping and unclean shifts. The initial suspicion is a transfer case oil issue, possibly due to low or degraded oil. It is suggested to check and change the transfer case oil with the correct specification. If the problem persists, worn or defective gears might be the cause, requiring inspection and potential repair at a workshop.

Did this summary help you solve your problem?

4 comment(s)

I had a similar issue on my Bipper. Have you checked the transfer fluid level? It might be low, or the oil could be degraded. What kind of gear oil are you using?

Thanks for the quick reply! I haven't checked the level yet, but that's next on my list. As for the gear oil, I'm not sure what's in there currently, probably whatever the shop used last time. Could worn gears be the culprit too, or is it more likely just the oil?

Worn gears are a possibility, especially with the mileage. However, start with a transfer case oil change using the correct spec. If the problem persists, it might be defective gears. I would recommend taking it to a workshop for inspection.

Thanks for the advice! I'll start with the oil change and see how it goes. I had it checked at the workshop and you were right: defective gears. The repair is going to cost around 330€ but it's worth it to get it running smoothly again.

rmh_community_comment_box_header

community_crosslink_scanner_headline

community_crosslink_scanner_intro

community_crosslink_scanner_title

community_crosslink_scanner_price

community_crosslink_rmh_headline

community_crosslink_rmh_intro

community_crosslink_rmh_title

community_crosslink_rmh_subtitle

community_crosslink_rmh_brand

PEUGEOT

community_crosslink_rmh_model

BIPPER