Carly Community
ChrissyMey
BMW 4 Series Convertible problems with the navigation system screen
(Translated from German)
11 comment(s)
ChrissyMey (Author)
Hey, sounds like exactly what I could do. Do you remember roughly how much you paid for it? And were there any other problems afterwards? Best regards!
(Translated from German)
MHammerX
Hey, sure, I can help you with that. It was similar for me, and after the mechanic came, I no longer had any problems with the navigation system. It turned out that the cable connection between the control unit and the display was actually defective, which caused the screen to fail. The repair cost me exactly €165. The mechanic replaced the defective cable connections and made sure that everything was properly reconnected. Since then, everything has been working perfectly again. Hope this helps you! Best regards!
(Translated from German)
ChrissyMey (Author)
Hey, your answer definitely helps me! I think I will have my BMW checked by another mechanic to hopefully have a better experience this time. 165€ sounds acceptable if the problem is really fixed afterwards. Thanks for the detailed information! Best regards!
(Translated from German)
lemarr
bmw x5 e 70 year 2010 my screen went blank the radio sounds good and usb i bought the carly thinking that with this i could program ,,,,, what should i do i checked the wiring and everything is fine.
(Translated from Spanish)
CarlyAdminBenny
Quotation:
@lemarr wrote on
bmw x5 e 70 year 2010 my screen went blank the radio sounds good and usb i bought the carly thinking that with this i could program ,,,,, what should i do i checked the wiring and everything is fine.
Hello, it sounds to me as if you have had a problem with the navigation system's processing unit for some time.
(Translated from German)
Racer2024
Quotation:
@CarlyAdminBenny wrote on
Hello, it sounds to me as if you have had a problem with the navigation system's processing unit for some time.
I can only agree with Benny, that sounds more like a defect in the navigation computer.
(Translated from German)
Amucktuber
Hello, i got ettor code 00A468, it say i got a problem with the screen but I don’t have any error with it, why do i have a error code on it?
Jamez
I installed a Linux screen with CarPlay in my car
(Translated from German)
Jamez
Hi, so there is no real problem with me, I just installed a new screen in my BMW E60 520d built in 2009 and I have to say it is really an alternative, I now have CarPlay and can still use all the old functions.
(Translated from German)
Join the discussion now:
MHammerX
Hey, I had similar problems with my 2017 BMW 3 Series. In my case, the cable connection between the control unit and the display was defective, which caused a poor connection. My mechanic checked the connections and found that some cables and connectors were corroded. These were replaced and the system recalibrated. This was a more serious matter, but it worked perfectly after the repair. Best regards!
(Translated from German)