Carly Community
leoniejohnson33
Central Locking Failure on Mercedes CLK
4 comment(s)
leoniejohnson33 (Author)
Thanks for the response. Where is the central locking pump located in your vehicle? Did your diagnostic system show a specific fault code? I want to check everything before taking it to a shop.
liamswift26
I don't remember the exact fault code. The pump in my car was in the trunk, behind the left trim panel. But it might be different in your 2008 CLK. Check a Mercedes-Benz repair manual or a technician to find the exact location. I'd suggest going to a workshop for professional help.
leoniejohnson33 (Author)
Thanks for the help. Your suggestion about the wiring harness was right. I checked the cable connections in the door jambs and found a corroded connector. After cleaning it and adding dielectric grease, the central locking system works again. The security system and car alarm are working as expected now, and the car locks respond to the key fob. You saved me time and money. The repair cost estimate was pretty accurate.
Join the discussion now:
liamswift26
I also have a Mercedes CLK, though I'm not sure of the year. I had a similar central locking issue that also affected my car locks and security system. The fault was in the wiring harness connecting to the central locking pump. Check all cable connections, especially in the door jambs and trunk, for corrosion, loose connections, or damaged insulation. Also, check the key fob battery.