jenniferice1
City Keyless Access Fault
Summary of the thread
A 2021 Honda City hybrid experienced a keyless access fault on the driver's door, with an error related to the door handle electronics. The issue was suspected to be a faulty connection, possibly in the wiring loom where it passes from the door to the body. It was advised to inspect the wiring under the rubber boot, but due to the complexity, professional diagnosis was recommended. The problem was confirmed as a faulty connection in the door wiring and was repaired at a local garage.
Did this summary help you solve your problem?
4 comment(s)
jenniferice1 (community.author)
Thanks for the tip! I haven't checked the wiring loom specifically. Is there a straightforward way to access it without damaging anything?
patrickeis4
It's usually covered by a rubber boot. Carefully peel that back and inspect the wires. However, fiddling with wiring can be tricky if you're not experienced. Given it's a potential electrics fault, and you have an error code, honestly, getting it checked by a workshop might save you a bigger headache. Plus, they have the right tools to diagnose properly.
jenniferice1 (community.author)
Appreciate the advice. I took it to a local garage and they confirmed it was a faulty connection in the door wiring. Repair cost me 95€. Thanks again!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
HONDA
community_crosslink_rmh_model
CITY
patrickeis4
Sounds like a pain! I've heard of similar issues. A defective cable or plug connection for the door handle component is quite likely. Have you checked the wiring loom where it passes from the door to the body? That's a common spot for breaks.