100% Free

No Scanner Needed

Carly logo
Prices

maximilianklein1

Clio Transport Mode Issue

I've just bought a 2012 Renault Clio with a diesel engine (214085 km) and it seems to be stuck in 'transport mode'. The navigation system isn't working and I'm getting some general electrical glitches. The dealer said it's because it's new, but could that really be the reason? Any ideas what might be causing this 'transport mode' issue and how to disable it? I've checked the key fob battery, and that's fine, and the engine starts okay, so I don't think it's the immobilizer. Could it be something simple I'm missing, like some car configuration thing?

Summary of the thread

A 2012 Renault Clio was experiencing issues with being stuck in 'transport mode,' causing the navigation system to malfunction and other electrical glitches. The problem was identified as a configuration meant to preserve the battery during shipping. The solution involved using Renault's diagnostic software to reset the car's computer settings, which was successfully done by a Renault specialist, resolving the issue without any cost.

Did this summary help you solve your problem?

4 comment(s)

eliaskrueger57

I had something similar happen with my Clio – although it's a slightly older model. 'Transport mode' is designed to preserve the battery during shipping, limiting certain functions. The navigation being down is a classic symptom. The key fob is unlikely to be the problem. Usually, it involves a specific procedure or diagnostic tool to deactivate it. It sounds like the dealer is being a bit vague. Did they mention anything about updating the car's software or the Body Control Module (BCM)?

maximilianklein1 (community.author)

No, they didn't mention software updates or the Body Control Module. Is that something I can do myself, or is it a job for the pros? I don't want to mess anything up, especially with the electrics. And you mentioned a 'specific procedure' – any idea what that might involve?

eliaskrueger57

Honestly, disabling transport mode often requires Renault's diagnostic software (like their CAN Clip tool) to access the car's computer (ECU) and reset the configuration. While there might be DIY methods floating around, they can be risky and potentially brick the system. From what you described, you might need to go to the workshop. They will connect the car to their diagnostic system, check if there is any error code, and then perform a software update to disable the transport mode.

maximilianklein1 (community.author)

Took your advice and went to a Renault specialist. Turns out, it really was transport mode, as the dealer eventually admitted. They hooked it up to their diagnostics and cleared the settings. All working perfectly now, and no charge! Thanks for pointing me in the right direction; I'd never have figured that out myself.

rmh_community_comment_box_header

community_crosslink_scanner_headline

community_crosslink_scanner_intro

community_crosslink_scanner_title

community_crosslink_scanner_price

community_crosslink_rmh_headline

community_crosslink_rmh_intro

community_crosslink_rmh_title

community_crosslink_rmh_subtitle

community_crosslink_rmh_brand

RENAULT

community_crosslink_rmh_model

CLIO