ludwigpeters7
Corolla Preheating Lamp Issue
Summary of the thread
A 2006 Toyota Corolla diesel had an issue where the preheating lamp wouldn't switch off, and the check engine light was illuminated, accompanied by smoke during acceleration. The problem was suspected to be related to the engine preheat system, possibly due to a defective preheating unit or a bad connection. After scanning for error codes, it was confirmed that a defective cable to the preheating control unit was the cause. Replacing the cable resolved the issue, eliminating the warning lights and smoke.
Did this summary help you solve your problem?
4 comment(s)
ludwigpeters7 (community.author)
Thanks for the tip! Where exactly is the preheating control unit located? And did your car also have the smoke issue when accelerating? Just trying to confirm if we had the exact same symptoms. I will scan for error codes as you recommend.
lisaknight16
Yes, I had the smoke issue too. The preheating control unit is usually near the engine block, but I recommend taking it to a workshop to confirm the diagnosis and avoid damaging anything. They can pinpoint the issue quickly.
ludwigpeters7 (community.author)
I took your advice and got the car scanned. Turns out it was a defective cable to the preheating control unit, just as suspected! The workshop replaced the cable, and the total repair cost was 95€. No more preheating light, no more check engine light, and no more smoke. Thanks for your help!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
TOYOTA
community_crosslink_rmh_model
COROLLA
lisaknight16
I had a similar issue on my Corolla. Check the cable and plug connections to the preheating control unit. Make sure they are clean and properly connected. Have you scanned the car for error codes? That would give you a more precise idea of what's going on.