100% Free

No Scanner Needed

Carly logo
Prices

berndflame1

Equus fuel pressure sensor issue

I'm having some trouble with my 2013 Hyundai Equus (gasoline engine). It has about 62000 km on it. The check engine light is on, and the engine runs rough, sometimes stalling at idle. It also jerks a bit when accelerating. Could a defective fuel pressure sensor cause these symptoms?

Summary of the thread

The 2013 Hyundai Equus is experiencing issues such as a check engine light, rough idling, stalling, and jerking during acceleration. These symptoms suggest a potential problem with the fuel pressure sensor, which could be causing incorrect fuel delivery. A defective sensor or its wiring can lead to these issues, and inspecting the wiring for damage or corrosion is recommended. Ultimately, the problem was traced to a defective cable connection to the fuel pressure sensor, which was resolved at a workshop.

Did this summary help you solve your problem?

4 comment(s)

isabellastern64

A defective fuel pressure sensor definitely could cause those issues. The engine stalling, rough idle, and jerking are classic signs of fuel delivery problems. The sensor tells the car's computer how much fuel pressure there is, and if it's sending bad info, the computer can't adjust the fuel mixture correctly. Have you checked the sensor's wiring and plug connection? A loose or corroded connection could be the culprit.

berndflame1 (community.author)

Thanks for the quick reply! When you say 'wiring and plug connection', what exactly should I be looking for? Is there a way to test it without special equipment?

isabellastern64

By 'wiring and plug connection', I mean visually inspect the wires going to the fuel pressure sensor. Look for any obvious damage like cuts, frays, or melted insulation. Then, check the plug (the connector that snaps onto the sensor) for corrosion or bent pins. Unfortunately, to properly test the sensor and its wiring, you'd really need a multimeter to check for voltage and continuity. Given the symptoms, and without specialized tools, I would suggest taking it to a workshop.

berndflame1 (community.author)

Thanks, I appreciate the advice! It turned out the cable connection to the fuel pressure sensor was indeed defective, just like you suspected. Cost me 95€ to get it sorted at a workshop.

rmh_community_comment_box_header

community_crosslink_scanner_headline

community_crosslink_scanner_intro

community_crosslink_scanner_title

community_crosslink_scanner_price

community_crosslink_rmh_headline

community_crosslink_rmh_intro

community_crosslink_rmh_title

community_crosslink_rmh_subtitle

community_crosslink_rmh_brand

HYUNDAI

community_crosslink_rmh_model

EQUUS