hermannweber1
Escape low brake fluid spongy pedal
Summary of the thread
A 2000 Ford Escape is experiencing consistently low brake fluid levels and a spongy brake pedal. Possible causes include worn brake pads, leaks in the brake lines, or an internal leak in the master cylinder. Suggested solutions involve inspecting the brake lines, master cylinder, and replacing worn pads. After following these steps, the issue was resolved with new brake pads and a fluid flush, restoring proper brake function.
Did this summary help you solve your problem?
4 comment(s)
hermannweber1 (community.author)
Thanks for the tip! I'll definitely check the lines and master cylinder more closely. When you say 'internal leak', does that mean the fluid could be leaking into the booster, or somewhere else I can't easily see?
johanneswolf1
Exactly, the fluid could be leaking past the seals inside the master cylinder itself, so it's not necessarily going to drip onto the ground. Given the age of your Escape, it's probably worth having a shop give it a thorough inspection of the entire hydraulic brake system. Could be the master cylinder, a caliper, or even just worn pads/shoes that are causing the fluid level to drop as the pistons extend further.
hermannweber1 (community.author)
Appreciate the advice. Took it to a local shop, and you were right. Turns out the front pads were completely shot, and the rears weren't far behind. New pads all around and a fluid flush set me back 480€, but the brakes feel solid again. Thanks for pointing me in the right direction!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
FORD
community_crosslink_rmh_model
ESCAPE
johanneswolf1
I had a similar problem with my old Opel Astra, though the spongy pedal was more pronounced. I'd check your brake lines for any leaks. Also, inspect the master cylinder. Low fluid with no visible leaks often points to an internal leak in the master cylinder, or worn pads indeed.