100% Free

No Scanner Needed

Carly logo
Prices

antonsteel46

Fiat Bravo rough running and stalling

I am experiencing difficulties with my 2009 Fiat Bravo, gasoline engine, mileage 221284 km. The check engine light comes on, the engine runs rough, and it stalls at idle. Furthermore, there is jerking when accelerating. I suspect a defective fuel pressure sensor, potentially related to a defective cable or plug connection. Could this be the cause?

Summary of the thread

A 2009 Fiat Bravo is experiencing rough running, stalling at idle, and jerking during acceleration, with the check engine light on. The suspected cause is a defective fuel pressure sensor or related wiring issues. After inspecting the wiring harness and connector without finding visible damage, it was suggested to consult a workshop for a diagnostic check. The workshop confirmed the issue was a broken cable at the fuel pressure sensor, which was repaired.

Did this summary help you solve your problem?

4 comment(s)

manfredlang63

I had similar symptoms on my Bravo. Rough running, stalling, and a check engine light. The issue might indeed be related to the fuel pressure sensor circuit integrity. Have you checked the wiring harness and connector leading to the sensor for any visible damage or corrosion?

antonsteel46 (community.author)

Thank you for your reply. I have inspected the wiring harness and connector, but I did not find any visible damage. Is it possible that the sensor is sending wrong data to the fuel injectors, messing up the fuel delivery?

manfredlang63

It is plausible the sensor malfunction is influencing fuel delivery. Given the symptoms and your inspection, I would advise consulting a workshop for a diagnostic check. It's difficult to pinpoint the exact issue without proper tools. I did the same, and they found a broken cable on mine.

antonsteel46 (community.author)

I appreciate your input. I followed your advice and visited a workshop. The fault was, indeed, a broken cable at the fuel pressure sensor, as you suggested. The repair cost was 95€. Thank you for pointing me in the right direction.

rmh_community_comment_box_header

community_crosslink_scanner_headline

community_crosslink_scanner_intro

community_crosslink_scanner_title

community_crosslink_scanner_price

community_crosslink_rmh_headline

community_crosslink_rmh_intro

community_crosslink_rmh_title

community_crosslink_rmh_subtitle

community_crosslink_rmh_brand

FIAT

community_crosslink_rmh_model

BRAVO