ninamaier5
Koleos brake light switch error
Summary of the thread
A 2023 Renault Koleos exhibited a brake light error, with the error memory indicating a fault with the brake light switch, causing the brake lights to malfunction and an error message to appear on the infotainment system. The issue was suspected to be due to accidental brake pedal activation while the car was off, leading to a temporary malfunction. The recommended solution was to visit a workshop for a reset, which successfully resolved the issue by clearing the error code and resetting the switch without any repair charges.
Did this summary help you solve your problem?
4 comment(s)
ninamaier5 (community.author)
Yes, I read out the error memory myself using an OBD scanner. It's possible I touched the brake pedal while the vehicle was off. Could that cause the brake light switch to fail completely?
maximilianblade1
It's unlikely to cause a complete failure, but it can definitely cause a temporary malfunction. The system probably registered an illogical state (brake light on without the engine running). A trip to the workshop would be best. They should be able to reset the switch or at least properly diagnose the problem.
ninamaier5 (community.author)
Thanks for the advice. I took the Koleos to the workshop, and they confirmed the error was due to inadvertent brake pedal activation as you suggested. They simply cleared the error code and reset the switch. There was no charge for the repair. Your input was greatly appreciated.
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
RENAULT
community_crosslink_rmh_model
KOLEOS
maximilianblade1
I had a similar issue with my Koleos. Did you accidentally touch the brake pedal while the car was off? The brake light switch can get confused if the pedal isn't fully released during startup. The switch itself closes a circuit when you depress the brake pedal, activating the brake lights. When you say it's in the error memory, did you read this out yourself?