kurt_mystic10
Lexus ES Hybrid Fuel Level Sensor Issue
Summary of the thread
A 2014 Lexus ES hybrid experienced issues with the check engine light and engine stalling, linked to a fuel level sensor problem. The potential causes included a blown fuse, faulty wiring, or sensor malfunction. Upon investigation, the issue was resolved by replacing a blown fuse, which cleared the check engine light and resolved the stalling problem.
Did this summary help you solve your problem?
4 comment(s)
kurt_mystic10 (community.author)
Thanks! By error memory, do you mean the diagnostic codes it threw? And where exactly would I find the fuel level sensor fuse? I am pretty sure there is one. Is it in the fusebox under the hood, or somewhere else?
piaswift60
Yes, the diagnostic trouble codes (DTCs) stored in the engine control unit (ECU) are what I mean by error memory. If the error code specifically points to the fuel level sensor signal being out of range, that is important. The fuse location is usually documented in your owner's manual, or a diagram on the fuse box cover itself. If you're not comfortable checking it yourself, a workshop visit would be advisable.
kurt_mystic10 (community.author)
Thanks a bunch for the help! I checked the fuse diagrams like you said and found the fuel level sensor fuse. It was indeed blown. Replaced it, and so far, so good. Check engine light is gone, and it idles fine. Cost me 52€ for the fuse and the diagnostic at my repair shop. Hopefully, that's the end of it!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
LEXUS
community_crosslink_rmh_model
ES
piaswift60
A faulty fuel level sensor can definitely cause those symptoms. Does the error memory indicate an implausible signal from the sensor? Have you checked the wiring and connections to the sensor for any obvious damage or corrosion? A defective fuse is the best case - I would start there.