Carly Community
marthasteel1
Master Washer Fluid Warning Light
4 comment(s)
marthasteel1 (Author)
Thanks for the suggestion. I haven't checked the pump directly yet. Where is it located, and is it easy to access? Also, how would I test it to make sure it's actually the problem?
louishunter75
The pump is usually located near the bottom of the washer fluid reservoir. Access can be a bit tight depending on your specific setup, but it's generally reachable from underneath the vehicle. The easiest way to test is to check if it's receiving power when you activate the windshield washers. If it is, and it’s still not pumping, then it's highly likely the pump has failed. I would recommend taking it to a workshop.
marthasteel1 (Author)
Okay, thanks! It turned out to be the pump. The workshop confirmed it and replaced it for 25€. Now it is working perfectly. The warning message disappeared after clearing the error memory.
Join the discussion now:
louishunter75
I had a similar issue with my Master. The error memory can be misleading. Have you checked the pump itself? It might be faulty, even if the sensor seems fine. If the pump isn't working, no fluid will be sprayed, and the error will persist.