luiselorenz1
Mercedes E Klasse ABS Fault
Summary of the thread
A 2005 Mercedes E Klasse with a diesel engine is experiencing an ABS fault and traction issues, with diagnostics indicating a speed signal fault. A defective control unit is suspected, particularly concerning the transmission speed sensor input. Before replacing the control unit, it's advised to check the sensor and wiring for damage or loose connections. Ultimately, the ABS control unit was confirmed faulty and replaced at a cost of around 1000€.
Did this summary help you solve your problem?
4 comment(s)
luiselorenz1 (community.author)
Thanks for the advice. How do I test the sensor to see if it's sending the correct signal? I'm not sure how to check the transmission speed sensor or where it is located. Any pointers?
simonneumann7
Due to the system's complexity and the chance of misdiagnosis, a qualified technician should do a diagnostic evaluation. Replacing the sensor without confirming the control unit's functionality could be a waste. Based on the symptoms, a control unit replacement might be needed, especially if the diagnostic indicates an internal fault. You could try to replace the sensor, but you will likely need a workshop.
luiselorenz1 (community.author)
I took your advice and went to a workshop. The ABS control unit was faulty, like the diagnostic showed. The speed sensor input wasn't being processed correctly. The replacement cost around 1000€. Thanks for the help!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
MERCEDES
community_crosslink_rmh_model
EKLASSE
simonneumann7
The speed signal fault on the E Klasse is a known issue. A defective control unit is a plausible cause, especially regarding the signal input from the transmission speed sensor. Before replacing the unit, check the sensor and its wiring for damage, corrosion, or loose connections. A faulty sensor can appear as a control unit malfunction.