100% Free

No Scanner Needed

Carly logo

janaice9

Mercedes E Klasse Air Suspension Problem Resolved

My 2010 Mercedes E Klasse diesel has an air suspension issue. The car won't lift, leans to one side, shows an error, and the low beams are misaligned. Diagnostic memory shows a suspension error. I suspect the air suspension compressor or a defective cable or plug. Has anyone had similar suspension or load leveling issues on this E Klasse generation? Any tips for diagnosing a compressor failure beyond electrical connections? With 107650 km, is a compressor replacement and installation quote of 95€ fair?

4 comment(s)

michaelmueller5

Sounds like the suspension pump is malfunctioning. The ride height issue and error message are typical. Start by checking the suspension and compressor fuses. Also, inspect the wiring harness for damage or corrosion. A faulty suspension system can affect leveling.

janaice9 (Author)

Thanks for the quick reply. The fuses seem intact. I'll re-inspect the wiring harness for corrosion or damage. When you mention leveling, do you mean the self-leveling function? Is there a separate sensor or module that could be contributing? I'm wondering if the compressor failure is a symptom of another problem.

michaelmueller5

Yes, I mean the self-leveling function. A faulty sensor could cause the compressor to overwork or not activate, leading to premature failure. However, given the error codes and complete loss of function, it's likely the compressor or its wiring. I'd suggest getting it checked by someone with the right tools.

janaice9 (Author)

I appreciate the advice. I had it diagnosed. It was a corroded connector leading to the compressor. I cleaned the contacts, applied dielectric grease, and it's working again. The cost was 95€, as quoted. Thanks for pointing me in the right direction!

Join the discussion now: