florianjohnson17
Mercedes M Klasse alarm problem
Summary of the thread
A 2001 Mercedes M Klasse is experiencing issues with its alarm system, where the alarm erroneously detects a break-in without actually sounding. The problem may be linked to a power failure or battery issue causing a false alarm. A suggested solution involves checking the alarm control module's coding for optical locking confirmation, as a voltage dip might have scrambled the coding. The issue was resolved by recoding the alarm control module at a shop, confirming the initial suspicion and avoiding the need for a costly alarm system replacement.
Did this summary help you solve your problem?
4 comment(s)
florianjohnson17 (community.author)
Optical locking confirmation? Hmm, that's a new one on me. How do I check that? Is it something I can do myself, or am I looking at a trip to someone with the right software?
davidjung42
You'll need some diagnostic kit to check that. SDS or similar. Honestly, unless you're familiar with coding stuff, best bet is to get it checked at a shop. It's usually a quick fix if that's the problem.
florianjohnson17 (community.author)
Turns out you were spot on. Took it to the shop, and they confirmed the optical locking was the issue. Recoded the alarm control module, and it's been behaving itself ever since. Bill came to 45€, which is a lot less than replacing the whole alarm system. Thanks again for your help!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
MERCEDES
community_crosslink_rmh_model
MKLASSE
davidjung42
Sounds familiar. I had a similar gremlin in my M Klasse. Check if your alarm control module is coded to activate the optical locking confirmation, using the indicators to signal locking/unlocking. If it is, that could be your culprit. A voltage dip, maybe from a battery issue, can scramble the coding and cause the alarm to act wonky.