nelefox47
Mini One door electronics fault
Summary of the thread
A 2007 Mini One diesel developed a fault with its keyless access, linked to a door electronics error. The suspected cause was a defective connection in the car door handle, possibly due to a faulty cable or plug. After inspecting the door panel and connectors, a workshop visit confirmed the issue as a faulty connection in the door handle electrics. Replacing the defective cable/plug resolved the problem, restoring the keyless access functionality.
Did this summary help you solve your problem?
4 comment(s)
nelefox47 (community.author)
When you say wiring harness, are you referring to the connector inside the car door itself, or somewhere else? I've had the door panel off and visually inspected the connector at the door handle, but everything looked OK at first glance. I'm wondering if there's a specific area I should be focusing on.
michaelshadow1
Yes, I was referring to the connector inside the car door. On the Audi, the corrosion was very subtle and hard to spot initially. However, given that you have an error code pointing towards the door electronics, and considering the age of the vehicle, a visit to a workshop might be worthwhile to diagnose and rectify the issue properly.
nelefox47 (community.author)
Just wanted to give you a heads up – I took it to the workshop, and you nailed it! It was indeed the door handle electrics. The car door locking system was acting up because of a faulty connection in the door handle. They replaced the defective cable/plug, and the keyless access is working like a charm again. Total cost was 95€. Thanks a million for your help!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
MINI
community_crosslink_rmh_model
ONE
michaelshadow1
I had a similar issue with the electric door locking on my old Audi. The keyless entry stopped working, and it turned out to be a faulty door handle connection. Have you checked the wiring harness for any signs of damage or corrosion?