ida_loewe96
NX Engine Overheating Electric Fan Issue
Summary of the thread
A 2020 Lexus NX is experiencing engine overheating, suspected to be due to an impaired electric fan. The issue may stem from a defective cable or plug connection. A similar case involved a corroded connector causing intermittent fan failures. It is advised to check the fan motor relay and wiring harness, but professional inspection is recommended for a definitive solution.
Did this summary help you solve your problem?
4 comment(s)
ida_loewe96 (community.author)
Thank you for your input. No unusual noises so far. You are mentioning the fan motor relay and wiring harness - were your symptoms exactly the same? Did you fix the issue yourself or had to visit the workshop?
timschneider6
My symptoms were virtually identical: engine overheating due to a faulty electric fan. In my case, the relay was fine, but the connector to the fan motor showed signs of corrosion, leading to an intermittent connection. I attempted a temporary fix, but it ultimately required professional attention. Given the potential complexity, I would advise against extensive DIY repairs. I think it’s time for an expert to take a look at it.
ida_loewe96 (community.author)
Understood. I appreciate the confirmation and advice. Indeed, your experience mirrors mine closely. I'll take it to the workshop. It ended up costing me 95€, the cable or plug connection was defective.
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
LEXUS
community_crosslink_rmh_model
NX
timschneider6
I also drive an NX. I faced a comparable situation a while back. The overheating was indeed linked to the electric fan not functioning correctly. I would suggest you check the fan motor relay and the associated wiring harness thoroughly. A corroded connector can cause intermittent failures. Has the fan been making any unusual noises prior to this issue?