julianweiss1
Peugeot 1007 air suspension failure
4 comment(s)
julianweiss1 (Author)
Yeah, I gave the connections a quick look, but honestly, it was getting dark. What exactly should I be looking for? Any specific pins or wires that are known to cause trouble? And where is the compressor located?
uwe_walter8
Corrosion, damaged pins, loose connections. The usual suspects. The compressor's location varies, but usually it's near a wheel well or under the car, somewhere relatively protected but accessible. Honestly, if you're not comfortable tracing wires and testing connections, it might be worth getting a workshop to take a look. Could save you a bigger headache down the line.
julianweiss1 (Author)
Thanks for the advice! Turns out it was a corroded connector on the compressor, just like you said. Cleaned it up, and everything's working again. Cost me 95€ for the connector replacement. Appreciate the help!
Join the discussion now:
uwe_walter8
Sounds familiar. Had similar gremlins with my old Audi A6 allroad. The air suspension on those is a pain. Did you check the cable and plug connections to the compressor? Could be a simple disconnect or corrosion issue. It's often the equivalent of a loose wire in your Christmas lights - one goes, and the whole string is affected.