jessica_drache8
Peugeot 1007 Electronic Parking Brake Failure
4 comment(s)
jessica_drache8 (Author)
Thanks for the tip. I did check the wiring harness as far as I could see. The connectors seemed okay, but I didn’t do a proper continuity test. Was your issue exactly the same symptoms-wise? And did it resolve after fixing the wiring?
rudolfphoenix1
Yeah, exact same symptoms. Warning light, error code, bricked handbrake. Cleaning the connector pins didn't do anything, so I ended up going to a workshop since I don't have the equipment to diagnose it further. They replaced the calliper, and that fixed it.
jessica_drache8 (Author)
Okay, thanks for confirming. I think I'll take it to a workshop as well. I was hoping to avoid the cost, which looks like about 505€, but vehicle safety is paramount.
Join the discussion now:
rudolfphoenix1
I had a similar problem with my 1007. Are you sure it's the motor itself? Usually, it's just a corroded connector or a broken wire leading to the calliper. Have you checked those first?