oskarfire1
Peugeot 1007 power window failure
Summary of the thread
After replacing the battery in a 2006 Peugeot 1007, the power windows stopped functioning, and an error regarding window regulator initialization appeared. The issue was suspected to be related to a reset problem rather than a fuse or motor failure. Attempts to reset the windows manually were unsuccessful, leading to the conclusion that professional intervention was necessary. Ultimately, the problem was resolved at a garage where the window regulator was re-initialized using a diagnostic tool.
Did this summary help you solve your problem?
4 comment(s)
oskarfire1 (community.author)
Cheers for the quick reply! I tried the holding-the-button-down trick I found online, but it didn't do anything. Should the ignition be on, or the engine running when I try it? Any other tricks I could try? Is it likely to be the window motor itself? Accessing it means taking the door panel off, which I'd rather avoid...
OliverM
Yeah, the ignition should be on. If the window reset procedure doesn't work, there may be an issue with the regulator or motor. I spent ages fiddling with mine before taking it to a workshop. It was the regulator in the end. They recalibrated it with their diagnostic tool.
oskarfire1 (community.author)
Right, for anyone with a similar issue: I tried everything I could think of, but nothing worked. I took it to a local garage, and they sorted it. Turns out the regulator needed to be re-initialized using the diagnostic tool. Cost me 290€, which stung a bit, but at least it's fixed. Thanks for the help!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
PEUGEOT
community_crosslink_rmh_model
1007
OliverM
I had something similar happen in my Peugeot 307. After replacing the battery, the windows wouldn't work, and there was an error code. Did you try the window reset procedure? It involves holding the window button down for a few seconds, then up for a few seconds. Do it a few times. Does it work?