simonschmid1
Peugeot 206 blower motor issue
4 comment(s)
simonschmid1 (Author)
Fuses are fine. Any specific tools or methods you recommend for testing the sensor connections and wiring harness? Want to avoid causing more damage.
felixstar25
For the BMW, I used a multimeter to check the wire continuity and voltage at the sensor connector. If you're not familiar with a multimeter, a workshop might be best. If the sensor is faulty, it should cost about 95€ with installation. Peace of mind.
simonschmid1 (Author)
Appreciate the advice. I'll take it to a workshop to have the connections and sensor tested. Your BMW experience helped narrow down the causes.
Join the discussion now:
felixstar25
Interesting. Had a similar climate control issue with my old BMW 3 Series; turned out to be a faulty odor sensor. Ventilation system was acting up. Check the sensor connections and wiring harness first. Fuses related to the blower motor and climate control?