laurafire4
Peugeot 4007 ABS Traction Problems
Summary of the thread
A 2012 Peugeot 4007 is experiencing issues with the ABS light and traction problems, potentially due to a speed signal fault. The problem may be linked to faulty wheel speed sensors or a defective control unit, which are common issues in this model. Checking the input from the wheel speed sensors to the ECM and reading error codes are suggested starting points. If these checks don't resolve the issue, professional workshop assistance may be necessary, with potential repair costs around 1000€.
Did this summary help you solve your problem?
4 comment(s)
laurafire4 (community.author)
Thanks for the tip! I haven't checked the wheel speed sensors directly, I was mostly looking at the transmission connections. Is it difficult to check the sensors? And yes, the odometer is working fine. Where exactly should I look for the error codes?
samueljones8
Yeah, sounds like the same issue I had. I spent ages fiddling with it and eventually took it to a workshop. Turned out to be a defective control unit, which they said was a common problem in our cars. That's what was causing the bad signal. They quoted me around 1000€ for the repair. Good luck!
laurafire4 (community.author)
Okay, thanks a lot for the information! I think I'll take it to a workshop as well and get it checked out properly. Sounds like it's beyond my capabilities. The mentioned repair cost gives me a first impression of what to expect. I really appreciate your help, it has pointed me in the right direction!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
PEUGEOT
community_crosslink_rmh_model
4007
samueljones8
I had a similar problem with my 4007. ABS light, traction control going crazy... it was a nightmare. Have you checked the input from the wheel speed sensors to the ECM? If the ECM isn't getting the correct data, or any data, from one of the sensors, that might set off the whole cascade of errors. Have you tried reading out the error codes? Odometer working?