100% Free

No Scanner Needed

Carly logo

mats_peters4

Seat Exeo Keyless Entry Problem

I'm getting seriously frustrated with my 2013 Seat Exeo. The keyless entry has stopped working on the driver's door. The car has done 92998 km and has a gasoline engine. There's an error stored, and I suspect it's something to do with the door electronics in the door handle, maybe a bad cable or plug. Anyone else had this?

4 comment(s)

fabiantiger1

Sounds like a dodgy connection in the door electronics. I had a similar issue with my old Volvo, although the symptoms were slightly different. First, has the car been involved in any accidents recently? Also, have you checked the fuses? It's a simple thing, but often overlooked.

mats_peters4 (Author)

No accidents that I know of, and I did check the fuses, all seem fine. When you say dodgy connection, where exactly should I be looking? I'm not the most technically gifted, but I'm willing to have a go before taking it to a garage.

fabiantiger1

Okay, if the fuses are fine, then it's likely the connection to the door switch inside the car door itself. I wouldn't advise dismantling the door card yourself unless you're confident, as you could damage something. In my case, I took it to a workshop, and they quickly found a corroded connector. It might be best to get it checked professionally to avoid further issues.

mats_peters4 (Author)

Took it to the garage and they confirmed a faulty connection in the door electronics, like you suspected. 95€ later and the keyless entry is working again. Thanks for the help!

Join the discussion now: