Skoda Kodiaq Cruise Control Problem

That sounds like a frustrating issue. A non-functional cruise control can be a real pain, especially on long drives. The error message and stored error memory definitely point to an electrical problem. When you say the cruise control doesn't work, does it not engage at all, or does it cut out intermittently? Have you noticed any other electrical issues? Regarding your suspicion of a defective cable or plug: that's a very plausible cause. The cruise control system relies on various sensors and actuators communicating with the engine control unit (ECU). The ECU is the car's computer, basically. A loose or corroded connection can interrupt the signal flow. The steering wheel controls are connected via a 'clock spring' which allows electrical signals to pass while the wheel turns. This is a common failure point, so I would start there. Diagnostics is key. Have you tried scanning the car for error codes using an OBD2 scanner? It might give you a more specific indication of where the fault lies. It could also be related to the throttle body, but that's less likely if there are no other engine-related symptoms.

Thanks for the quick reply. It doesn't engage at all. No other electrical issues that I've noticed. I haven't scanned for error codes myself, but the error message says something about 'cruise control malfunction'. You mentioned the steering wheel and the clock spring. Is there an easy way to check that myself, or is it better left to a professional?

Okay, if it doesn't engage at all, and you're getting a specific error message about the cruise control, that does reinforce the idea of an electrical issue rather than a mechanical one with something like the throttle body. About the steering wheel and clock spring: Honestly, unless you're comfortable working with electrical components and have some experience disassembling steering wheel components, I'd advise against trying to fix it yourself. The steering wheel contains the airbag, and messing with that can be extremely dangerous if you don't know what you're doing. Also, the clock spring itself is a delicate component. Given that a diagnostic check has already revealed an error and you suspect a cable or plug issue, it's probably best to take it to a workshop. They can perform a more thorough diagnosis and pinpoint the exact location of the fault. Plus, they have the proper tools and expertise to repair or replace the wiring or the clock spring safely. It will likely be a quick fix for them.

Just wanted to share that it was indeed a defective cable or plug connection, as you suspected. The workshop sorted it for 95€. Cruise control is working perfectly again. Thanks a lot for your help.