Back
MiriWeber
Navigationssystem is not working
(Translated from German)
4 comment(s)
Hey, sure, I also have a Skoda Superb Diesel, built in 2018, so it's very similar to yours. My sat nav also spun once and the screen stayed black. It turned out that it wasn't just the cable connection that was the problem, but also the control unit itself. I had pretty much the same symptoms as you described, and I also had some loose panels, which probably put additional strain on the connections. At the workshop, they checked and fixed the cables, replaced the control unit and also reattached all the loose parts properly. The whole thing cost me just under 300 euros, but since then everything has been running smoothly again. If I were you, I would have the cable connections and the control unit checked. That could help you solve the problem. Keep your fingers crossed that it won't be too expensive. VG
(Translated from German)
Hey, I had a similar problem with my 2020 Skoda Octavia. I have some experience with cars, but I'm not a professional. In my case, the cable connection between the control unit and the display was defective, i.e. a bad connection. My garage then repaired it and I paid 165 euros for it. Maybe it's the cable connection in your case too. For more precise tips, it would be good to know which model you have and whether the symptoms are the same. Good luck!
(Translated from German)