CMAX Emergency Call System Malfunction

I had a similar problem on my CMAX. Same symptoms: error message, warning light... I was told it could be a connection issue too. Did the error code give you any clues about the specific component at fault? That might help narrow down where to look for the bad connection.

Thanks for the quick reply! The error code was somewhat generic, pointing to a malfunction in the emergency call system module itself. I'm not sure which cable or plug is most likely to cause this. I would hate to start taking apart the dashboard unnecessarily. Is there any specific area where the connections are known to be problematic?

Unfortunately, I don't know the exact location. In my case, the fault was diagnosed and repaired by a workshop. A defective cable or plug connection was listed in the report as the likely culprit. I'd suggest having it checked by a professional. It will likely be much faster and might save you some effort. In my case, the repair cost about 95€

Thanks for the advice. Based on your experience, I will probably take it to a workshop to have it properly diagnosed. The cost of 95€ is acceptable. I appreciate you confirming that this issue is not uncommon and that a connection problem is indeed a likely cause.