Crider Blower Motor Failure

Sounds like a faulty blower motor. The error code confirms it. Before replacing it, check the blower motor resistor and fuse. Sometimes a blown fuse or failing resistor mimics a dead motor. Also, inspect the wiring to the blower motor. A loose connection or corroded wire could be the problem. It's like a faulty light switch – sometimes the bulb is bad, sometimes it's a loose wire.

Thanks! I didn't consider the resistor or fuse, but I checked the wiring for damage. Where would I find the blower motor resistor and fuse? Is there a specific fuse number to look for in the fuse box?

The blower motor resistor is near the blower motor, often in the air duct. It's a small, rectangular component with a connector. For the fuse, check your owner's manual for the blower motor circuit fuse number. The fuse box is usually under the dashboard or in the engine compartment. Given the error code and lack of blower function, I still suspect the motor. But check the fuse and resistor first. If those are fine, visit a workshop. They'll confirm and replace the motor. Expect around 365€ for the repair.

Thanks for confirming my suspicions and for the fuse and resistor locations. The light switch analogy helped. I checked the resistor and fuse, but they're fine. I'm going to the workshop well-prepared now.