MaxVogel
Difficulty starting and flickering lights on 2017 Benz GLA, petrol engine, 92541 km
(Translated from German)
21 comment(s)
CarlyMechanic
Quotation:
@Larrytalar wrote on
Good morning, I have a problem with a mercedes W211 E270 I have a problem with a mercedes W211 E270 year 2004. The interior lights are always on, they only turn off when I lock the car with the remote control.
It sounds like there might be an issue with your car's door switch. The door switch is responsible for turning the interior lights on and off when the doors are opened or closed. If it's malfunctioning, it could cause the lights to stay on. Try checking each door switch to see if they're working properly. If you're not comfortable doing this yourself, I would recommend taking your car to a professional mechanic. Please keep us updated on your progress.
Edip49
What could be the problem
(Translated from German)
CarlyMechanic
Quotation:
@Edip49 wrote on
What could be the problem
As mentioned earlier, the issue could be due to a malfunctioning door switch. The door switch is responsible for turning the interior lights on and off when the doors are opened or closed. If it's not working properly, it could cause the lights to stay on. I recommend checking each door switch to see if they're functioning correctly. If you're not comfortable doing this yourself, it would be best to take your car to a professional mechanic. Let us know how it goes.
Dominik
Hello, I have a problem with my Mercedes C300 w205 2015. In the driver's door the window no longer goes up and makes no noise that it tries to go up and the ambient lighting flickers in the back, the memory seats still work a little, they start to move but then sometimes just stall and then I have to press the button again to continue. But I can control all the other windows from the door without any problems.
(Translated from German)
CarlyMechanic
Quotation:
@Dominik wrote on
Hello, I have a problem with my Mercedes C300 w205 2015. In the driver's door the window no longer goes up and makes no noise that it tries to go up and the ambient lighting flickers in the back, the memory seats still work a little, they start to move but then sometimes just stall and then I have to press the button again to continue. But I can control all the other windows from the door without any problems.
It sounds like there might be an issue with the power window motor or regulator in your driver's door. If the window isn't moving and you don't hear any noise, it's likely that the motor isn't receiving power or the regulator is broken. As for the ambient lighting and memory seats, it could be a wiring issue or a problem with the control module. I would recommend taking your car to a professional mechanic for a thorough inspection. Please keep us updated on your progress.
Ramic
Must the new battery be taught in I have installed a new battery but I can't register it because it is not possible via Carly Carly does not have a function for learning the battery. Start stop does not work at the moment Car over 30000 torque loses power in seconds and gets it again Thank you for your answer Greetings Ramic
(Translated from German)
Kaan.C
Good evening everyone :) The electric seat adjustment in my W204 C63 didn't work for a few weeks. Since today I have Carly and was able to find out that the control unit has recognized a too low voltage. I then sat in the back seat and pressed the seat adjustment button from behind while a colleague operated it. Lo and behold, the seat can be adjusted again without any problems, but I would like to get to the bottom of the possible cause in order to rectify it. Yours sincerely 😁
(Translated from German)
CarlyMechanic
Quotation:
@Kaan.C wrote on
Good evening everyone :) The electric seat adjustment in my W204 C63 didn't work for a few weeks. Since today I have Carly and was able to find out that the control unit has recognized a too low voltage. I then sat in the back seat and pressed the seat adjustment button from behind while a colleague operated it. Lo and behold, the seat can be adjusted again without any problems, but I would like to get to the bottom of the possible cause in order to rectify it. Yours sincerely 😁
It sounds like there might be a loose connection or a short in the wiring to your seat adjustment control. The fact that it started working when you pressed the button from a different angle suggests that the issue might be mechanical rather than electrical. I would recommend checking the wiring and connections to the control unit. If you're not comfortable doing this yourself, it would be best to take your car to a professional mechanic. Please keep us updated on your progress.
Ahmad1
Hello can someone help me with fault code b210a
Join the discussion now:
Larrytalar
Good morning, I have a problem with a mercedes W211 E270 I have a problem with a mercedes W211 E270 year 2004. The interior lights are always on, they only turn off when I lock the car with the remote control.
(Translated from Spanish)