ReinMueller
Electronics problems with the 2018 BMW 2 Series petrol engine: sat nav failure and warning lights
(Translated from German)
Summary of the thread
The conversation revolves around a 2018 BMW 2 Series petrol engine experiencing electronic issues, including a malfunctioning sat nav and warning lights on the speedometer. Possible causes suggested include faulty communication between control units, problems in the vehicle electrical system, and voltage fluctuations in the battery. Solutions proposed range from extensive troubleshooting and repair at a factory, to a simple reset of the control units by disconnecting the battery. A software update was also suggested as a potential fix for the sat nav issue.
Did this summary help you solve your problem?
201 comment(s)
CarlyMechanic
community_quotation:
community_author_wrote_on
Can you help me with the code 48002C please I am new it says immediate attention.
The error code 48002C typically relates to a malfunction in the vehicle's powertrain control module. This is a serious issue that could affect the performance and safety of your vehicle. I would recommend having your vehicle inspected by a professional mechanic as soon as possible.
Dominic
Have read out and deleted Carlo's fault memory. Since then, the air conditioning system has stopped working. No pressure is being built up. Half an hour before, everything was still working. What could this be?
(community_translated_from_language)
CarlyMechanic
community_quotation:
community_author_wrote_on
Have read out and deleted Carlo's fault memory. Since then, the air conditioning system has stopped working. No pressure is being built up. Half an hour before, everything was still working. What could this be?
It's possible that the air conditioning system was affected when you cleared the fault memory. I would recommend checking the fuse for the air conditioning system. If the fuse is fine, the issue could be with the AC control module or the AC compressor. It's best to have a mechanic diagnose the issue to avoid unnecessary part replacements.
Oscar-Mini
Hi, I have problems with the time and date setting on my Mini Cooper s f56 2018, I wanted to configure some things on the box, and it gave me error, coming out messages that I had to make an appointment at Mini to update software. I do not know why the backup does not load me, it tells me that the copy is the same as the update I have, it does not let me put time or date and gives error. Thanks
(community_translated_from_language)
CarlyMechanic
community_quotation:
community_author_wrote_on
Hi, I have problems with the time and date setting on my Mini Cooper s f56 2018, I wanted to configure some things on the box, and it gave me error, coming out messages that I had to make an appointment at Mini to update software. I do not know why the backup does not load me, it tells me that the copy is the same as the update I have, it does not let me put time or date and gives error. Thanks
It sounds like there might be an issue with the vehicle's internal computer or the software update process. I would recommend taking your Mini Cooper to a dealership or a mechanic who specializes in Mini Coopers. They should be able to diagnose the issue and help you set the time and date.
Dominic
community_quotation:
community_author_wrote_on
It's possible that the air conditioning system was affected when you cleared the fault memory. I would recommend checking the fuse for the air conditioning system. If the fuse is fine, the issue could be with the AC control module or the AC compressor. It's best to have a mechanic diagnose the issue to avoid unnecessary part replacements.
It would be an extremely big coincidence if the compressor were to break right then🤔 I'm not the first to have these problems with Carly. The original software will be installed today at noon, then we'll see...
(community_translated_from_language)
STG458
I have a chassis function restriction message. The rear suspension airbags are deflated. The compressor is running but not inflating the bags. I was told from BMW the ride height sensors were seized. I am thinking it could be the solenoid in the compressor? I replaced the air bags recently in the last couple of months. Thank you. Sean
CarlyMechanic
community_quotation:
community_author_wrote_on
I have a chassis function restriction message. The rear suspension airbags are deflated. The compressor is running but not inflating the bags. I was told from BMW the ride height sensors were seized. I am thinking it could be the solenoid in the compressor? I replaced the air bags recently in the last couple of months. Thank you. Sean
It's possible that the solenoid in the compressor could be the issue, especially if the compressor is running but the airbags aren't inflating. However, it could also be a problem with the air lines or valves. I would recommend having a mechanic inspect the compressor and the rest of the air suspension system to identify the exact issue. It's important to address this as it can affect the handling and safety of your vehicle.
Ggedi82
Hi on my x5 no air reaches the windshield, the air is directed to the rear row of seats
(community_translated_from_language)
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
BMW
community_crosslink_rmh_model
2
Cesar.2711
Can you help me with the code 48002C please I am new it says immediate attention.
(community_translated_from_language)