lindaice1
Fiat Bravo knock sensor issue
Summary of the thread
A 2011 Fiat Bravo with a gasoline engine is experiencing issues such as the check engine light being on, increased fuel consumption, and rough idling. The suspected cause is a faulty knock sensor or a bad connection. Upon inspection, a crack in the insulation of the cable near the sensor was found, likely due to engine heat. Replacing the sensor and fitting a new connector resolved the problem, restoring the car's performance.
Did this summary help you solve your problem?
4 comment(s)
lindaice1 (community.author)
Good point! I only gave the plug a quick once-over. Where on the cable did you find the damage? Was it near the sensor or closer to where it connects to the main harness? Just trying to save myself some time digging around.
sinawilliams7
In my case, it was closer to the sensor. The heat from the engine had definitely taken its toll. However, since you are not sure, I recommend visiting a trusted workshop to properly diagnose the issue before replacing any components.
lindaice1 (community.author)
Thanks for the tip! I checked the cable like you said, and you were spot on, there was a crack in the insulation! A new sensor and fitting a new connector cost me 95€. Runs like a dream now!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
FIAT
community_crosslink_rmh_model
BRAVO
sinawilliams7
I had a similar issue with my Bravo, though I can't recall the year right now. Same symptoms: check engine light, poor fuel efficiency, and rough idling. The diagnostic pointed to the knock sensor as well. Did you check the cable leading to the sensor itself? Sometimes the insulation gets brittle and cracks, causing a short.