Ford Focus electrical errors

Alright, having a weird one with my 2011 Ford Focus diesel. Lately, I'm getting sporadic errors in driving mode, and sometimes the error lamps light up like a Christmas tree. The audio and nav system will also just cut out, or the whole control unit seems to freeze up. Of course, there's an error stored in the memory. I've got almost 187000 km on the clock. Anyone else had this happen?

4 comment(s)

Good day. Based on the symptoms described in your post, the problem is likely to be related to a defective cable connection to the BUS system of the control unit. Have you attempted to read out the error code using an OBD-II scan tool? Providing the specific error code may help narrow down the affected control unit and confirm the diagnosis.

Thanks for the quick reply! I did use a scan tool, and it threw a bunch of codes related to different modules – ABS, radio, navigation, you name it. That's why I was so confused. If it's just a bad connection, is there a specific place I should be looking?

Given the multitude of error codes, it reinforces the initial assessment of a BUS system connectivity issue. While it may be tempting to trace the wiring yourself, I must strongly suggest a visit to a qualified workshop. Their diagnostic tools and expertise will allow them to pinpoint the exact location of the defective cable and ensure a proper, safe repair. Attempting repairs without the requisite knowledge and tools may exacerbate the problem and potentially damage the vehicle's electrical system further.

Appreciate the advice! Took it to the shop, and you nailed it – a dodgy cable connector on the control unit was the culprit. They cleaned it up and secured it properly. Cost me 155€, which is way better than replacing a bunch of modules. Thanks again for your help!

Join the discussion now: