100% Free

No Scanner Needed

Carly logo

Carly Community

leodark3

GLC oil level sensor issues

My 2016 Mercedes GLC with a gasoline engine is throwing oil level related errors. The speedometer displays an error message, the error memory has stored the fault, the oil pressure warning lamp lights up, and a warning light is constantly on. It all points to the oil level sensor or a faulty sensor signal. Has anyone else experienced this?

4 comment(s)

leonie_jones9

A faulty oil level sensor can certainly cause those symptoms. Have you checked the wiring and connector to the sensor itself? A damaged cable or loose connection is a common culprit. Is the engine oil level actually correct when you check it manually with the dipstick, or is it low? Also, has the car had any recent car maintenance or repairs done?

leodark3 (Author)

Yes, I checked the oil level with the dipstick, and it's fine. I've also visually inspected the wiring and the connector, but I didn't see any obvious damage. Is there a specific way to test the sensor or the wiring to pinpoint the problem? I don’t want to just start replacing parts without knowing for sure.

leonie_jones9

Without diagnostic equipment, further testing is difficult. If the wiring and connector appear intact, and the oil level is correct, the sensor itself is the most likely culprit. It could be an internal failure within the sensor. Given the symptoms and the potential for misinterpreting the warning lights, I would suggest consulting a qualified workshop. Continuing to drive with these warnings could potentially lead to more serious engine problems.

leodark3 (Author)

I took it to my local workshop, and they confirmed it was indeed the oil level sensor and a defective plug connection as you suspected. They replaced the sensor and repaired the connection for 95€. The error messages are gone, and the car runs smoothly again. I appreciate your insights!

Join the discussion now: