Kalos Power Window Failure

Sounds familiar. I had a similar issue with my Kalos. Power windows suddenly stopped working. Did you check the wiring loom between the door and the body? Sometimes those wires can fray and cause issues, like a short circuit that blows the fuse. It's like when a lightbulb burns out because the filament breaks.

Thanks for the tip! I haven't checked the wiring loom yet, I'll take a look. But if it's the wiring, wouldn't other things in the door be affected too, like the central locking? Or is the power window circuit separate?

That's a good point about the central locking. In my case, only the windows were affected. I initially thought it was just a fuse, but that wasn't it. It ended up being the window regulator motor itself. The error code pointing to the regulator makes me think it is more than just the wiring. Based on my experience, you might be better off taking it to a workshop. They can diagnose it properly and replace the faulty parts.

Okay, thanks for the advice! I checked the wiring loom, and it seemed fine. Based on your experience and the error code, I'll take it to a workshop. They quoted around 200€ for the repair, which they believe is due to a defective power window switch. Appreciate the help!