100% Free

No Scanner Needed

Carly logo

Carly Community

patricialight1

Lexus UX Transmission Issue

I'm having a transmission issue with my 2021 Lexus UX gasoline. At 190111 km, the engine warning light is on, and an error is stored. The gearbox is in emergency mode, slipping/shifting uncleanly, and making grinding noises. Could the transmission oil pressure sensor be at fault? I suspect that the gearbox oil level might be too low.

4 comment(s)

isabellaschmid92

I had a similar problem with my older BMW 5 Series. Same symptoms - MIL light, slipping, and eventually emergency mode. For me, it turned out to be a faulty transmission pressure switch. Have you checked the oil level, as that can trigger these symptoms? It's often the simplest thing to overlook!

patricialight1 (Author)

Thank you for sharing your experience. Is the pressure switch something that can be checked with standard OBD tools, or does it require specific diagnostic equipment? I will inspect the oil level as well, but I'm curious about how you diagnosed the pressure switch issue.

isabellaschmid92

The pressure switch fault can be read through the OBD, but you'll need a decent scanner that can read transmission-specific codes. A generic OBD reader might not cut it. In my case, the fault code pointed directly to the pressure switch circuit. Given your symptoms, checking the oil level is definitely step one, but if that's fine, I'd recommend visiting a workshop to have the codes read and the sensor properly diagnosed.

patricialight1 (Author)

Understood. I appreciate the advice. It turned out that you were right about the oil level being the issue, but unfortunately there was also some damage to the pressure gauge. After topping it off, I needed to change the sensor for 365€.

Join the discussion now: