eliasblaze68
Linea Fog Sensor and AC Issue
Summary of the thread
A 2012 Fiat Linea is experiencing issues with the A/C not functioning due to a fog sensor malfunction error. The problem is compounded by frozen windshield washer nozzles and non-working mirror heating, suggesting a potential electrical issue. The suspected cause is a faulty cable or connector near the sensor. The recommended solution is to visit a workshop for professional diagnosis and repair, including sensor recalibration.
Did this summary help you solve your problem?
4 comment(s)
eliasblaze68 (community.author)
Yep, the error code is definitely pointing to the fog sensor. I even tried clearing it, but it pops right back up after a short drive. Did your Linea have the same error code? And did those frozen spray nozzles and the mirror heating issue show up at the same time?
lilian_koehler4
Yes, the error was also specifically related to the fog sensor. Given the other symptoms you describe, it is likely an electrical issue. I'd recommend a workshop visit and avoid doing anything yourself. The documentation regarding sensor calibration is sparse. A defective cable or connector will then be replaced, and the sensor is recalibrated. In my case, the cost was approximately 95€.
eliasblaze68 (community.author)
Thanks a bunch for the info! Sounds like I'm better off taking it to a shop. I was hoping to avoid it, but chasing down electrical gremlins without proper tools sounds like a nightmare. I'll let you know how it goes!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
FIAT
community_crosslink_rmh_model
LINEA
lilian_koehler4
I have a Linea too, and I experienced something similar a while back: the A/C refusing to start and some weird sensor errors. Can you confirm if the error code specifically points to the fog sensor, or is it more generic?