Carly Community
Eriksch
Malfunction when starting the Benz GLE Class 2016: symptoms, causes and suggested solutions
(Translated from German)
46 comment(s)
CarlyMechanic
Quotation:
@Alan35 wrote on
B1138 The brake fluid level is not OK - SAVED Bad Last occurrence: B1113 Event B1113 Error in CAN communication with the SAM-F control unit - Current and saved Acceptable Last occurrence: C-AAC - Comfort air conditioning / AAC - Automatic air conditioning / HEAT - Automatic heating B1620 Event B1620 Error in CAN communication with the SAM-F control unit - Current and saved
It sounds like there might have been a short circuit when you tried to jump-start the car, which could have damaged the SAM control unit or the CAN-Bus system. I would recommend having a mechanic check the SAM control unit and the CAN-Bus system for any damage. This is a complex issue that requires professional diagnosis and repair.
CarlyMechanic
Quotation:
@Racer2024 wrote on
It is also important to check the relays. These may also have been damaged by a power surge.
It's true, relays can also be affected by a power surge. However, given the complexity of the issues you're experiencing, I would still recommend having a professional mechanic perform a thorough inspection. They can check not only the relays, but also the SAM control unit, the CAN-Bus system, and other potential problem areas.
Dr.EMM
How can error B165100 be rectified? Many thanks for the answer.
(Translated from German)
CarlyAdminChris
Good day! To provide a more accurate solution for the error B165100, could you please specify the brand, year, and model of your car? Many thanks!
Alan35
Brief update on my car, I had to replace the SAM front module as the old one was faulty. The replacement went smoothly, but now the reversing light always stays on. When I put the car in reverse gear, it goes out. somehow the Carly adapter also shows no error message, do you have a Mercedes CLK 2005 220 cdi for me?
(Translated from German)
Syed12
C221500
Blechatroniker
U15531 what is this error everything works in my vehicle
(Translated from German)
Blechatroniker
So it seems to me that you need more information I drive a vito 2.2cdi year 2018 639/2 W447 and the ominous error code is U15531 oh yes I have exchanged the roof control unit for one with glasses compartment and Led Bel. exchanged a multi-pole socket of the roof control unit remained free.
(Translated from German)
CarlyAdminBenny
Quotation:
@Alan35 wrote on
Brief update on my car, I had to replace the SAM front module as the old one was faulty. The replacement went smoothly, but now the reversing light always stays on. When I put the car in reverse gear, it goes out. somehow the Carly adapter also shows no error message, do you have a Mercedes CLK 2005 220 cdi for me?
Hello, was the control unit also taught or programmed to the vehicle or did you just replace it?
(Translated from German)
Join the discussion now:
CarlyMechanic
It sounds like the jump start may have caused an electrical surge that damaged some components. I would recommend checking the fuses first, as they are designed to blow in order to protect the rest of the electrical system. If the fuses are fine, then it's likely that the SAM control unit or the CAN-Bus system has been damaged and will need to be inspected by a professional.