marthahartmann1
Peugeot 208 Electric Power Window Failure
Summary of the thread
A 2023 Peugeot 208 owner experienced a failure in the power windows, with no response from any switches and a generic 'window regulator' error code. The issue was suspected to be a defective power window switch. Suggestions included checking the wiring harness for brittle or broken wires, particularly where it passes from the car body to the door. Ultimately, the problem was confirmed to be the power window switch, which was replaced at a local shop.
Did this summary help you solve your problem?
4 comment(s)
marthahartmann1 (community.author)
Good shout on the wiring harness, I'll definitely give that a look. I did check the harness at the door, but didn't notice anything obvious at first glance. Which specific wires are prone to breaking? The exact error code is B10EA-11.
leoniejones38
Yeah, it's usually the thinner gauge wires in that harness that go first. You will have to pull back the rubber boot to inspect better. Error code B10EA-11 confirms regulator motor circuit malfunction. Still, inspect the harness, but it's probably going to require diagnostics at a workshop.
marthahartmann1 (community.author)
Thanks for the insight! Ended up taking it to a local shop, and as suspected, the power window switch was indeed the culprit. Total cost was around 200€ including parts and labor. Appreciate the advice on checking the harness first though!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
PEUGEOT
community_crosslink_rmh_model
208
leoniejones38
Hey, I had a similar issue with my 208. Before you go ripping apart the door, have you checked the wiring harness where it passes from the car body to the door? Those wires are known for getting brittle and breaking. Also, which error code exactly did you pull?