100% Free

No Scanner Needed

Carly logo
Prices

christopherscholz76

Sedici Sporadic Error Messages

Hi, I'm having strange issues with my 2006 Fiat Sedici, gasoline engine. It has 242378 km on the clock. I'm getting sporadic error messages and illuminated error lamps while driving. Sometimes, various systems just fail, mostly affecting the audio/navigation. Other times, control units seem to temporarily shut down or just become unresponsive. I ran an OBD-II diagnostic tool and there's an error stored in the memory, but I'm unsure what to do with it. I suspect it could be related to a defective cable connection to the BUS system of one of the control units. Has anyone experienced something similar with their Sedici?

Summary of the thread

A 2006 Fiat Sedici is experiencing sporadic error messages and system failures, particularly affecting the audio/navigation and control units. The issue might be related to a defective cable connection to the BUS system of one of the control units. A similar problem in another vehicle was traced to a faulty CAN bus connection. It is suggested to check the wiring harness for damage or corrosion and to consult a qualified workshop for a thorough diagnosis.

Did this summary help you solve your problem?

4 comment(s)

franziskalion1

I had a similar experience with my Opel Astra a few years back. The symptoms sound eerily familiar. While the cars are obviously different, the underlying electronics might share some similarities. In my case, the issue stemmed from a faulty CAN bus connection. Have you checked the wiring harness for any signs of damage or corrosion? Also, were there any specific error codes that the OBD-II scanner reported? Knowing the error code might give you a more specific direction.

christopherscholz76 (community.author)

Thanks for the reply! I appreciate the info about your Astra. Regarding the wiring harness, I did a quick visual inspection, but I didn't notice anything obvious like frayed wires or corrosion. The OBD-II scanner spat out a few codes, but they were all fairly generic related to 'system voltage low' and 'communication bus error'. Nothing specific to one particular module. I'm wondering if you remember any of the specific error codes you received when you had the issue with your Opel?

franziskalion1

I understand. Unfortunately, I don't recall the exact error codes from my Opel. It was a while ago. However, given the generic codes you're seeing and the symptoms you described, it does sound like a CAN bus issue or potentially a control unit with a bad connection. I would advise visiting a qualified workshop before things get worse. They will be able to properly diagnose it and estimate the eventual repair cost.

christopherscholz76 (community.author)

Thanks, I appreciate your advice. I'll take your advice and bring it to a workshop to get properly diagnosed.

rmh_community_comment_box_header

community_crosslink_scanner_headline

community_crosslink_scanner_intro

community_crosslink_scanner_title

community_crosslink_scanner_price

community_crosslink_rmh_headline

community_crosslink_rmh_intro

community_crosslink_rmh_title

community_crosslink_rmh_subtitle

community_crosslink_rmh_brand

FIAT

community_crosslink_rmh_model

SEDICI