100% Free

No Scanner Needed

Carly logo

lars_ghost7

Skoda Praktik Diesel Alarm Issue

I'm in a bit of a pickle with my 2009 Skoda Praktik diesel. The alarm system has decided to stop working entirely I've got an error stored in the error memory indicating a siren communication fault. From what I've gathered, the likely cause is a defective cable or plug connection. I'm dreading a potential security breach. Before I shell out 95€ at the garage, has anyone experienced something similar Any tips for a possible alarm reset or anything else I can check myself This is rather concerning

4 comment(s)

eberharddragon1

Sounds familiar I had a similar signal problem with my Praktik’s alarm system. Have you checked the alarm controller’s wiring harness Specifically, look for any signs of corrosion or damage to the cable or plug connection.

lars_ghost7 (Author)

Thanks for the quick reply Where exactly is the alarm controller located And when you say 'wiring harness,' are there any specific wires I should be looking at I'm not super technical, but I can usually manage basic fault detection if I know where to look.

eberharddragon1

Yeah, mine was a corroded connector. The alarm controller is usually behind the glove box, but I'd recommend getting a workshop to take a look. They can do a proper fault detection and alarm reset. It's tricky to get to and you don't want to risk damaging anything further.

lars_ghost7 (Author)

Fantastic I took your advice and brought my Praktik to the workshop. Turns out, it was exactly as you suspected a corroded connector on the alarm controller. They cleaned it up, did an alarm reset, and the whole thing cost me about 95€. Thanks a million for pointing me in the right direction I was getting worried about a potential security breach.

Join the discussion now: