simonloewe10
Skoda Praktik rough running issue
Summary of the thread
A 2009 Skoda Praktik with a gasoline engine was experiencing rough running, stalling, and a check engine light, with error codes indicating a fuel pressure sensor issue. The problem was suspected to be either the sensor itself or a faulty connection. It was advised to check the wiring and connections, as a loose or corroded connector could cause similar symptoms. Ultimately, a workshop diagnosed and resolved the issue by replacing the faulty plug and sensor, resulting in smooth engine performance and the check engine light turning off.
Did this summary help you solve your problem?
4 comment(s)
simonloewe10 (community.author)
I haven't checked the wiring yet, as I'm not very experienced with car electrics. Is there a way to check the connection without special tools? Where is the fuel pressure sensor located on my engine?
lukasstern30
Given your lack of experience with electrics, and the fact that the error code points directly to the sensor, the best course of action is probably to take it to a workshop. A defective cable or plug connection is a likely cause, and a professional can diagnose it properly and replace the faulty parts. It's better than risking damage to other components. Think of it like a doctor diagnosing an illness – they have the tools and expertise to identify the root cause.
simonloewe10 (community.author)
It was the fuel pressure sensor. The workshop found a faulty connection, just as suspected. They replaced the plug and sensor for 95€. The engine runs smoothly, and the check engine light is off. Thanks for your help!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
SKODA
community_crosslink_rmh_model
PRAKTIK
lukasstern30
The symptoms you describe do point towards a fuel delivery issue. The fuel pressure sensor is a prime suspect. Before replacing it, have you checked the wiring and connections to the sensor itself? A loose or corroded connector can cause similar problems. It's like a loose wire on a lamp – it might flicker or not work at all even if the bulb (sensor) is fine.