dieterdark1
Talento radiator oil pressure issue
Summary of the thread
A 2022 Fiat Talento owner is experiencing issues with the radiator oil pressure, indicated by the transmission and check engine lights being on, and the automatic transmission stuck in emergency mode with slipping and grinding noises. The suspected cause is a defective cable or plug connection. A fellow Talento owner suggests checking the cooling fan, oil cooler, and pressure sensor, but ultimately recommends professional diagnosis. The issue is confirmed to be a defective cable/plug connection, which is resolved at a workshop.
Did this summary help you solve your problem?
4 comment(s)
dieterdark1 (community.author)
Thanks for the tip! I'll check the cooling fan and oil cooler for leaks. Where exactly is the pressure sensor located? And what should I look for specifically when checking the cable/plug connections?
friedhelm_tiger4
The sensor's usually near the radiator, but honestly, with all those symptoms and potential cable issues, I'd advise getting it checked by a professional workshop. I managed to pinpoint the issue myself, but it was quite the hassle. It would be faster and you can be sure about what's wrong. Good luck!
dieterdark1 (community.author)
Thanks a lot for your help and suggestion! I did bring it to the workshop. Turns out it was indeed a defective cable/plug connection, as suspected. Repair cost was 95€. Appreciate the advice!
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
FIAT
community_crosslink_rmh_model
TALENTO
friedhelm_tiger4
Hey, I've got a Talento as well, and that sounds awfully familiar! When mine acted up, I had the same symptoms, the lights, the slipping, everything. Did you check the cooling fan? Maybe also take a look at the oil cooler to make sure there's no coolant leak? Is the pressure sensor working fine?