jakobbecker27
Ulysee Jerking and Hissing
Summary of the thread
A 2008 Fiat Ulysee with 93,000 km is experiencing jerking during acceleration, a hissing noise, stalling at idle, increased fuel consumption, and reduced engine power, with the check engine light on. These symptoms suggest a potential issue with the boost pressure sensor or a defective cable or plug. A similar case confirmed that a loud hissing noise often indicates a turbo system problem, such as a loose hose or faulty sensor. The recommended solution is to have the vehicle inspected at a workshop to prevent further damage, which in this case confirmed a defective boost pressure sensor and cable.
Did this summary help you solve your problem?
4 comment(s)
jakobbecker27 (community.author)
Yes, there's a loud hissing when accelerating. I suspected the pressure sensor because of the symptoms matching what I found online. You mentioned similar symptoms; was it the same sensor in your case?
WunderRobin
Yep, loud hissing points to a turbo leak. My issue was indeed related to the turbo system. I'd suggest getting it checked at a workshop; they can pinpoint the exact cause. Could be a loose hose or the sensor itself. Don't keep driving it like that, you might end up damaging more components.
jakobbecker27 (community.author)
Thanks for the advice. Took it to the workshop, and you were right. Bad boost pressure sensor, as suspected. Cable was indeed defective. Total cost was 95€. All good now.
rmh_community_comment_box_header
community_crosslink_scanner_headline
community_crosslink_scanner_intro
community_crosslink_scanner_title
community_crosslink_scanner_price
community_crosslink_rmh_headline
community_crosslink_rmh_intro
community_crosslink_rmh_title
community_crosslink_rmh_subtitle
community_crosslink_rmh_brand
FIAT
community_crosslink_rmh_model
ULYSEE
WunderRobin
Sounds familiar. I've got a Ulysee too. Had similar symptoms - check engine light, jerking, the whole shebang. Was it accompanied by any whistling or hissing sounds when accelerating? It could very well be the boost pressure sensor. How did you arrive at that conclusion?