RudiN2021
Warning light and increased fuel consumption in a 2018 BMW X3 Diesel - experience reports and tips wanted
(Translated from German)
19 comment(s)
emi6600
Quotation:
@CarlyAdminBenny wrote on
Hello, I think the topic creator got something mixed up here. Which error were you able to read out exactly?
Just a coincidence, I had the same problems. I solved the DSC error by changing the brake pads, but after changing the turbocharger(quickly found a used local one so I could go on vacation😁), now it is still limited mainly by the 3f57/Charge-air pressure controller error. Checked all intake hoses, next to inspect the intercooler, then turbocharger reconditioning.
Randy
Breaks replaced along with wear sensor but break warning light still on
CarlyAdminBenny
Quotation:
@Randy wrote on
Breaks replaced along with wear sensor but break warning light still on
Hello, Did you use an original wear indicator or one from the aftermarket? It is often the case that only original wear indicators work. Of course, the wiring harness to the ABS/DSC control unit may also be defective. Is the brake fluid level at the correct level?
(Translated from German)
Artemon
Hello wanted to change today rear brakes completely on Bmw x5 e70 year 2010 With Carly wanted to set brakes to service mode, as I understood Carly does not have this function because this function does not work for x5 e70 Too bad
(Translated from German)
X5smitty
My 2013 x5 35i has an issue where on the first try it won’t start. But starts on the second try indecently changed the battery a month ago.
CarlyMechanic
Quotation:
@X5smitty wrote on
My 2013 x5 35i has an issue where on the first try it won’t start. But starts on the second try indecently changed the battery a month ago.
It sounds like your starter motor might be failing. If the car doesn't start on the first try but does on the second, it's often a sign that the starter motor is on its way out. I'd recommend having it checked by a mechanic. Please keep us updated on your progress.
Bohmben
Hello, I changed the brakes on my series 2 gran tourer as well as the sensors but impossible to make a reset for the maintenance of the pads via the dashboard and with the Carly box it tells me that it has made the reset but nothing changes the brake light remains lit.
(Translated from French)
CarlyAdminNik
Quotation:
@Bohmben wrote on
Hello, I changed the brakes on my series 2 gran tourer as well as the sensors but impossible to make a reset for the maintenance of the pads via the dashboard and with the Carly box it tells me that it has made the reset but nothing changes the brake light remains lit.
Hello, our support team is here to help you. Please contact us by clicking on this link and we'll get back to you as soon as possible https://support.mycarly.com/hc/fr-fr/requests/new?ticket_form_id=360000444960
Join the discussion now:
CarlyMechanic
It sounds like the brake wear sensor might not have been replaced when the brakes were done, or it could be a glitch in the system. Try resetting the brake pad warning light. If the light comes back on, you should have the brake wear sensor checked or replaced. If the problem persists, it's best to have a mechanic look at it.