sarah_koehler6
Zoe Rear Ventilation Flap Fault
4 comment(s)
sarah_koehler6 (Author)
The error code doesn't mention the motor, just a general malfunction in the rear ventilation flap circuit. Could you explain how to inspect the wiring harness and plug? What are the signs of a bad cable or connection?
ralf_schmitz3
Okay, 'general malfunction' is super vague! Grab a multimeter if you have one. First, check for voltage at the plug when the system should be activating the flap. No voltage usually means wiring or the control unit. If you HAVE voltage, the motor's likely the culprit. Visually inspect the wires – look for any cracks, breaks, or corrosion. Corrosion can build up inside the plug, even if you can’t see it easily. Honestly though, for something like that, paying a shop the 95€ to diagnose it properly might save you a headache. They can pinpoint it way faster.
sarah_koehler6 (Author)
I followed your advice and found a bad connection point in the wiring harness and plug. I took it to a shop, and they confirmed the cable/plug connection was defective. It cost 95€ to repair. Thanks again for your help!
Join the discussion now:
ralf_schmitz3
Whoa, sounds annoying! Is it throwing codes related to the flap motor itself, or is it more vague like "climate control malfunction"? The rear vent flap is usually controlled by a small electric motor. It’s possible the motor is dead, or more likely, the wiring harness or the plug connecting to the motor has gone bad. Check the wiring – sometimes wires get brittle and crack, especially near connectors. Give the plug a wiggle and see if anything changes. You might need to pull the trim panel to get a good look.