Electronic failures and warning light in VW Touran 2006: experience and solutions wanted

H my sharan 2019 20 to has an error code B200500 ?

The B200500 error code typically indicates a control module issue. To address this, try performing a full system reset by disconnecting the car's battery for about 30 minutes and then reconnecting it. If the error persists, it's advisable to consult with a professional mechanic or a VW dealership for a detailed diagnosis. Please keep us updated on your progress.

Displays stop and go fault . Engine vibration at idle . Stop and go does not work

(Translated from French)

The engine vibration at idle and the stop-and-go fault could be related to several issues, such as a problem with the engine mounts, spark plugs, or the idle control system. I recommend starting by checking the condition of your spark plugs and engine mounts. If these are in good condition, it might be necessary to have a professional mechanic inspect the idle control system and the stop-and-go system for any faults. Please let us know how it goes or if you have any further questions.

GOLF GTD MK7 2.0 I have a flashing glow plug light and the ACC FRONT ASSIST and ERROR on the start stop system fault engine has next to no power GLOW Plug with sensor has been changed Low boost on turbo from Carly scanner And engine control unit error

The flashing glow plug light, ACC Front Assist error, and low engine power suggest a potential issue with the turbocharger system or a related component. Since you've already changed the glow plug with the sensor, I recommend checking the turbocharger's vacuum lines and boost pressure sensor for any leaks or faults. Additionally, inspect the intercooler and its connections for any blockages or leaks. If these checks don't resolve the issue, it might be necessary to have a professional mechanic perform a more detailed diagnostic on the turbocharger and engine control unit. Please keep us updated on your progress.

I have a VW Tiguan 2 (built in 2016) and keep having the problem that the automatic transmission is malfunctioning. When reading out the data, it shows that clutch 1 closes or opens unintentionally, always in 2nd gear. The error codes are P175D00 and P175E00. I had the position sensors 1 and 2 replaced a few months ago and am at the end of my patience. I don't know what to do. Can anyone help me? Thanks in advance.

(Translated from German)

The error codes P175D00 and P175E00 indicate issues with the clutch position in the transmission. Since you've already replaced the position sensors, the problem might be related to the clutch actuator or the transmission control module. I recommend having the clutch actuator inspected for any mechanical faults or misalignments. Additionally, ensure that the transmission fluid is at the correct level and in good condition, as low or dirty fluid can affect clutch operation. If these checks don't resolve the issue, consulting a transmission specialist might be necessary. Please keep us updated on your progress.

I got this fel code about the parking sensor control unit DTC 01044 Control module incorrectly coded How to fix this problem?

To address the DTC 01044 error, which indicates that the control module is incorrectly coded, you will need to recode the parking sensor control unit. This can typically be done using a diagnostic tool that supports coding functions, such as VCDS or a similar device. Follow the tool's instructions to access the control module and input the correct coding for your vehicle model. If you're unsure about the correct coding, it might be best to consult with a professional mechanic or dealership to ensure it's done accurately. Please let us know if you have any further questions or need additional assistance.